Powering modules

Each module's Core board has a standard 10 pin Eurorack power connector. The PSU has 16 pin power connectors. This means you'll need 10 wire Eurorack cables to connect the modules to the PSU.

[TK photos]

The default patch PCB is passive, no need for power cables for that.

Making power cables for the Moduleur enclosure

Due to the limited space, if you're using the modules in the Moduleur enclosure you'll need four custom Eurorack power cables, each with an extra floating 2x5 pin socket — this allows one cable to power two modules.

Fortunately it's very simple to create these cables, here's a video how:

[TK: video]