-
-
Notifications
You must be signed in to change notification settings - Fork 0
Reported Working Devices
github-actions[bot] edited this page Apr 10, 2026
·
7 revisions
This page is generated automatically from public device reports submitted through the Solar2MQTT report form.
| Manufacturer | Model | Transport | Protocol | Protocol ID | Detected Model | Firmware | Build Variant | Notes | Reports |
|---|---|---|---|---|---|---|---|---|---|
| ANERN | AN-SCI-ECO-3200 | RS232 | PI30 | PI30 | VMII-NXPW5KW | - | wemos_d1_mini32 | Actually it is ESP32 30 pin CH340 | 1 |
| ECGSOLAX | VICTOR MAX-10.2 KW-M | RS232 | PI30_MAX | PI30 | VMII-NXPW5KW | - | wemos_d1_mini32 | Using ESP32. Pin assignment: UART Rx: GPIO19 UART Tx: GPIO23 You can get power from the RS232/Wifi port (RJ45) using a 5V stepdown: RJ45 Pin 8: Ground RJ45 Pin 4: VCC (Check voltage first before connecting.) | 1 |
| SUMRY | SP7000 | RS232 | PI30 | PI30 | - | - | esp32c3_supermini | - | 1 |
| WERCHTAY | GD3024EMH | RS232 | PI30 | PI30 | VMII-3000 | - | wemos_d1_mini32 | PIN-Layout RJ45 am Inverter: Pin 2: 12V VCC Pin 3: Inverter TX Pin 5: GND Pin 6: Inverter RX | 1 |
- Entries are grouped automatically by manufacturer, user model, transport and detected protocol.
- Firmware and build values are merged when multiple reports describe the same device family.
- Notes from matching reports are merged into the same row.
If something does not work, start with wiring, settings and the Debug page.
Solar2MQTT is a community project. Some devices work immediately, others need a little troubleshooting and a good debug report.