Skip to content

Actions: Duet3D/RepRapFirmware

Actions

All workflows

Actions

Loading...
Loading

Showing runs from all workflows
159 workflow runs
159 workflow runs

Filter by Event

Filter by Status

Filter by Branch

Filter by Actor

[Bug] Additional UVW axes on mb-as-expansion misbehaving Auto-close blank templates #317: Issue #1126 opened by droftarts
7s
7s
CAN disconnecting when Input Shaping frequency is below 12Hz Auto-close blank templates #316: Issue #1125 opened by droftarts
9s
9s
M915 H0 causes board to reset Auto-close blank templates #315: Issue #1124 opened by dc42
8s
8s
Suppress Move task operations when main board is used as expansion Auto-close blank templates #314: Issue #1123 opened by dc42
9s
9s
Change main board used as expansion to use Move task to prepare moves Auto-close blank templates #313: Issue #1122 opened by dc42
9s
9s
Issues with manual bed probing using G30 and manual jogging in M291 in 3.6.0 Auto-close blank templates #312: Issue #1121 opened by dc42
9s
9s
Release 3.6.0 Upload prerelease assets #11: Release 3.6.0 published by dc42
1s
1s
Release 3.6.0 Upload release assets #24: Release 3.6.0 published by dc42
50s
50s
Allow the www directory to be configurable in gcode or specified in rr_connect Auto-close blank templates #311: Issue #1120 opened by T3P3
12s
12s
Closed loop position recovery post power restoration Auto-close blank templates #310: Issue #1119 opened by T3P3
9s
9s
Increase remote endstop switch/Z probe accuracy Auto-close blank templates #309: Issue #1118 opened by dc42
12s
12s
RRF incorrectly executes commands while waiting for blocking user input Auto-close blank templates #308: Issue #1117 opened by dc42
9s
9s
G30 changing X coordinate Auto-close blank templates #307: Issue #1116 opened by dc42
15s
15s
Probe connected to EXP1HCL board stops triggering Auto-close blank templates #306: Issue #1115 opened by dc42
11s
11s
3.6.0-rc.3 code 3 movement halts when input shaping frequency is low Auto-close blank templates #305: Issue #1114 opened by dc42
10s
10s
Make G1 F moves with no axes or extrusion more efficient Auto-close blank templates #304: Issue #1113 opened by dc42
8s
8s
[FeatureRequest]: Allow parameters to be passed as part of a tool change Auto-close blank templates #303: Issue #1112 opened by jaysuk
10s
10s
Support for BME680/688/690 Auto-close blank templates #302: Issue #1111 opened by robbiesilverhand
9s
9s
Change the way that kinematics classes included and discovered Auto-close blank templates #301: Issue #1110 opened by dc42
9s
9s
3.6.0-rc.3 Upload release assets #23: Release 3.6.0-rc.3 published by dc42
1s
1s
3.6.0-rc.3 Upload prerelease assets #10: Release 3.6.0-rc.3 published by dc42
22s
22s
[Bug]: Unable to display move.axes[].drivers array Auto-close blank templates #300: Issue #1109 opened by AndyEveritt
9s
9s
[FeatureRequest]: Support M73 C parameter Auto-close blank templates #299: Issue #1108 opened by jltx1
9s
9s
Add direct Modbus spindle control Auto-close blank templates #298: Issue #1107 opened by dc42
11s
11s
[FeatureRequest]: Multiple Motion System - Micro Z Adjustment and Z Hopping Auto-close blank templates #297: Issue #1106 opened by ukdavewood
7s
7s