Home
Follow Us: Reddit Twitter Instagram
- Maximum to control 5 axis, 3 to 5 optional
- 5 Opto isolated digital outputs
- 8 Opto isolated digital inputs
- 0-10V analog signal for spindle speed control
- 12-24V Power input, 1A
- 3.5 inches TFT screen for DRO display
- USB Key to transfer G-Code file to the device
- Advanced G Code interpreting algorithm asure high performance and accuracy
- Large size G Code files are supported
- Support starting G Code from specific line number
- Homing, Go to zero, work piece origin position saving
- Backlash Support on all axis
- FRO : Feed Rate Override
- SRO : Spindle Feed Rate Override
- SRJ : Jogging Speed Setting
- F : Feed Rate, mm/min
- S : Spindle Speed, RPM
- X : X Axis
- Y : Y Axis
- Z : Z Axis
- A : A Axis (Rotary)
- BUSY : The system is busy. FRO and SRO can still be adjusted
- READY : Ready mode, any operation can be performed
- RESET : Reset mode, axis can be manually jogged with arrow key
- CONT : Continuous mode, axis can be jogged continuously with arrow key
- STEP : Step Mode. axis can be jogged in predefined step size with arrow key
- MPG : MPG Mode, Operate the machine with Manual Pulse Generator
- AUTO: Run G Code. Auto Status is showing when gcode file is processing
- Lead Screw Configuration
- Max Speed Configuration
- Acceleration Configuration
- Backlash Configuration
- Limit Switch Configuration
- Homing Configuration
- Probing Configuration
- Spindle Output Configuration
- Load G Code File
- Set Original Position
- Test Run
- Pause Execution
- Resume Execution
- Cancel Execution
- Execute from specific line of G Code File