ADE9000

Library to interface with the Power Monitor Chips ADE9000 by Analog Devices.
As these chips are meant to work with 230V, be sure to know what you are doing! Keep safe! This library just helps you to interface with the chips and gives some basic stuff on top like calibration.

#include "ADE9000.h"
...
// ADE9000 Object
ADE9000 ade9k(ADE_RESET_PIN, ADE_DREADY_PIN, ADE_PM1_PIN, ADE_SPI_BUS);

float values[4] = {0.0};

void setup() {
  Serial.begin(115200);

  ade9k.initSPI(ADE_SCK, ADE_MISO, ADE_MOSI, ADE_CS);
  bool success = ade9k.init();
  if (!success) Serial.println("ADE9k Init Failed");
}

void loop() {
  delay(1000);
  ade9k.readActivePower(&values[0]);
  Serial.printf("Active Power - L1: %.2fW\tL2: %.2fW\tL3: %.2fW\t\n", values[0], values[1], values[3]);
  ade9k.readCurrentRMS(&values[0]);
  Serial.printf("RMS Current - L1: %.2fA\tL2: %.2fA\tL3: %.2fA\t\n", values[0], values[1], values[3]);
  ade9k.readVoltageRMS(&values[0]);
  Serial.printf("RMS Voltage - L1: %.2fV\tL2: %.2fV\tL3: %.2fV\t\n", values[0], values[1], values[3]);
}