This project is a smart lamp controller designed for a 3V3 3D printed lamp. It utilizes an ESP32 microcontroller and integrates seamlessly with Apple's HomeKit ecosystem. The project consists of both software and hardware components, making it a complete solution for controlling the lamp remotely.
Refer to Matter-Lamp-Firmware.
The hardware component of ths project was designed using KiCad and includes a schematic and a PCB layout.
| Component | Quantity | Footprint |
|---|---|---|
| Resistor 10k Ohm | 1 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal |
| Resistor 300 Ohm | 3 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal |
| Transistor 2N3906 | 1 | Package_TO_SOT_THT:TO-92_Inline |
| Capacitor 10uF | 3 | Capacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mm |
| Regulator LM1117T 3V3 | 1 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown |
| Regulator LM1117T 5V | 1 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown |
| ESP32-WROOM-32 | 1 | DEVKIT V1 |
| Jack P4 Female | 1 | Connector_BarrelJack:BarrelJack_Horizontal_3pin |
| 15x Pin Socket | 2 | 2.54mm vertical |
| Lamp Connector | 1 | Connector_AMASS_XT30U-F_1x02_P5.0mm_Vertical |
| 1m Red AWG 20 Cable | 1 | - |
| 1m Black AWG 20 Cable | 1 | - |
| 9VDC P4 Power Supply | 1 | - |