Bot: Update dependencies

.references/spirv-tools

@@ -1 +1 @@
-1c69c17
+3ac12f1

spirv-tools/source/val/validate.cpp

@@ -390,6 +390,7 @@ spv_result_t ValidateBinaryUsingContextAndValidationState(
     if (auto error = AtomicsPass(*vstate, &instruction)) return error;
     if (auto error = PrimitivesPass(*vstate, &instruction)) return error;
     if (auto error = BarriersPass(*vstate, &instruction)) return error;
+    if (auto error = DotProductPass(*vstate, &instruction)) return error;
     if (auto error = GroupPass(*vstate, &instruction)) return error;
     // Device-Side Enqueue
     // Pipe

spirv-tools/source/val/validate.h

@@ -180,6 +180,9 @@ spv_result_t AtomicsPass(ValidationState_t& _, const Instruction* inst);
 /// Validates correctness of barrier instructions.
 spv_result_t BarriersPass(ValidationState_t& _, const Instruction* inst);
 
+/// Validates correctness of DotProduct instructions.
+spv_result_t DotProductPass(ValidationState_t& _, const Instruction* inst);
+
 /// Validates correctness of Group (Kernel) instructions.
 spv_result_t GroupPass(ValidationState_t& _, const Instruction* inst);
 

spirv-tools/source/val/validate_dot_product.cpp

@@ -0,0 +1,188 @@
+// Copyright (c) 2026 LunarG Inc.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+#include <cstdint>
+
+#include "source/val/instruction.h"
+#include "source/val/validate.h"
+#include "source/val/validate_scopes.h"
+#include "source/val/validation_state.h"
+
+namespace spvtools {
+namespace val {
+namespace {
+
+spv_result_t ValidateSameSignedDot(ValidationState_t& _,
+                                   const Instruction* inst) {
+  const uint32_t result_id = inst->type_id();
+  if (!_.IsIntScalarType(result_id)) {
+    return _.diag(SPV_ERROR_INVALID_DATA, inst)
+           << "Result must be an int scalar type.";
+  }
+
+  const spv::Op opcode = inst->opcode();
+  const bool has_accumulator = opcode == spv::Op::OpSDotAccSat ||
+                               opcode == spv::Op::OpUDotAccSat ||
+                               opcode == spv::Op::OpSUDotAccSat;
+  if (has_accumulator) {
+    const uint32_t accumulator_type = _.GetOperandTypeId(inst, 4);
+    if (accumulator_type != result_id) {
+      return _.diag(SPV_ERROR_INVALID_DATA, inst)
+             << "Result must be the same as the Accumulator type.";
+    }
+  }
+
+  if (opcode == spv::Op::OpUDot || opcode == spv::Op::OpUDotAccSat) {
+    if (!_.IsIntScalarTypeWithSignedness(result_id, 0)) {
+      return _.diag(SPV_ERROR_INVALID_DATA, inst)
+             << "Result must be an unsigned int scalar type.";
+    }
+  }
+
+  const uint32_t vec_1_id = _.GetOperandTypeId(inst, 2);
+  const uint32_t vec_2_id = _.GetOperandTypeId(inst, 3);
+
+  const bool is_vec_1_scalar = _.IsIntScalarType(vec_1_id, 32);
+  const bool is_vec_2_scalar = _.IsIntScalarType(vec_2_id, 32);
+  if (is_vec_1_scalar != is_vec_2_scalar) {
+    return _.diag(SPV_ERROR_INVALID_DATA, inst)
+           << "'Vector 1' and 'Vector 2' must be the same type.";
+  } else if (is_vec_1_scalar && is_vec_2_scalar) {
+    // If both are scalar, spec doesn't say Signedness needs to match
+    const uint32_t vec_1_width = _.GetBitWidth(vec_1_id);
+    const uint32_t vec_2_width = _.GetBitWidth(vec_2_id);
+    if (vec_1_width != 32) {
+      return _.diag(SPV_ERROR_INVALID_DATA, inst)
+             << "Expected 'Vector 1' to be 32-bit when a scalar.";
+    } else if (vec_2_width != 32) {
+      return _.diag(SPV_ERROR_INVALID_DATA, inst)
+             << "Expected 'Vector 2' to be 32-bit when a scalar.";
+    }
+
+    // When packed, the result can be 8-bit
+    const uint32_t result_width = _.GetBitWidth(result_id);
+    if (result_width < 8) {
+      return _.diag(SPV_ERROR_INVALID_DATA, inst)
+             << "Result width (" << result_width
+             << ") must be greater than or equal to the packed vector width of "
+                "8";
+    }
+
+    // PackedVectorFormat4x8Bit is used when the "Vector" operand are really
+    // scalar
+    const uint32_t packed_operand = has_accumulator ? 6 : 5;
+    const bool has_packed_vec_format =
+        inst->operands().size() == packed_operand;
+    if (!has_packed_vec_format) {
+      return _.diag(SPV_ERROR_INVALID_DATA, inst)
+             << "'Vector 1' and 'Vector 2' are a 32-bit int scalar, but no "
+                "Packed Vector "
+                "Format was provided.";
+    }
+  } else {
+    // both should be vectors
+
+    if (!_.IsVectorType(vec_1_id)) {
+      return _.diag(SPV_ERROR_INVALID_DATA, inst)
+             << "Expected 'Vector 1' to be an int scalar or vector.";
+    } else if (!_.IsVectorType(vec_2_id)) {
+      return _.diag(SPV_ERROR_INVALID_DATA, inst)
+             << "Expected 'Vector 2' to be an int scalar or vector.";
+    }
+
+    const uint32_t vec_1_length = _.GetDimension(vec_1_id);
+    const uint32_t vec_2_length = _.GetDimension(vec_2_id);
+    // If using OpTypeVectorIdEXT with a spec constant, this can be evaluated
+    // when spec constants are frozen
+    if (vec_1_length != 0 && vec_2_length != 0 &&
+        vec_1_length != vec_2_length) {
+      return _.diag(SPV_ERROR_INVALID_DATA, inst)
+             << "'Vector 1' is " << vec_1_length
+             << " components but 'Vector 2' is " << vec_2_length
+             << " components";
+    }
+
+    const uint32_t vec_1_type = _.GetComponentType(vec_1_id);
+    const uint32_t vec_2_type = _.GetComponentType(vec_2_id);
+    if (!_.IsIntScalarType(vec_1_type)) {
+      return _.diag(SPV_ERROR_INVALID_DATA, inst)
+             << "Expected 'Vector 1' to be a vector of integers.";
+    } else if (!_.IsIntScalarType(vec_2_type)) {
+      return _.diag(SPV_ERROR_INVALID_DATA, inst)
+             << "Expected 'Vector 2' to be a vector of integers.";
+    }
+
+    const uint32_t vec_1_width = _.GetBitWidth(vec_1_type);
+    const uint32_t vec_2_width = _.GetBitWidth(vec_2_type);
+    if (vec_1_width != vec_2_width) {
+      return _.diag(SPV_ERROR_INVALID_DATA, inst)
+             << "'Vector 1' component is " << vec_1_width
+             << "-bit but 'Vector 2' component is " << vec_2_width << "-bit";
+    }
+
+    const uint32_t result_width = _.GetBitWidth(result_id);
+    if (result_width < vec_1_width) {
+      return _.diag(SPV_ERROR_INVALID_DATA, inst)
+             << "Result width (" << result_width
+             << ") must be greater than or equal to the vectors width ("
+             << vec_1_width << ").";
+    }
+
+    if (opcode == spv::Op::OpUDot || opcode == spv::Op::OpUDotAccSat) {
+      const bool vec_1_unsigned =
+          _.IsIntScalarTypeWithSignedness(vec_1_type, 0);
+      const bool vec_2_unsigned =
+          _.IsIntScalarTypeWithSignedness(vec_2_type, 0);
+      if (!vec_1_unsigned) {
+        return _.diag(SPV_ERROR_INVALID_DATA, inst)
+               << "Expected 'Vector 1' to be an vector of unsigned integers.";
+      } else if (!vec_2_unsigned) {
+        return _.diag(SPV_ERROR_INVALID_DATA, inst)
+               << "Expected 'Vector 2' to be an vector of unsigned integers.";
+      }
+    } else if (opcode == spv::Op::OpSUDot || opcode == spv::Op::OpSUDotAccSat) {
+      const bool vec_2_unsigned =
+          _.IsIntScalarTypeWithSignedness(vec_2_type, 0);
+      if (!vec_2_unsigned) {
+        return _.diag(SPV_ERROR_INVALID_DATA, inst)
+               << "Expected 'Vector 2' to be an vector of unsigned integers.";
+      }
+    }
+  }
+
+  return SPV_SUCCESS;
+}
+
+}  // namespace
+
+spv_result_t DotProductPass(ValidationState_t& _, const Instruction* inst) {
+  const spv::Op opcode = inst->opcode();
+
+  switch (opcode) {
+    case spv::Op::OpSDot:
+    case spv::Op::OpUDot:
+    case spv::Op::OpSUDot:
+    case spv::Op::OpSDotAccSat:
+    case spv::Op::OpUDotAccSat:
+    case spv::Op::OpSUDotAccSat:
+      return ValidateSameSignedDot(_, inst);
+    default:
+      break;
+  }
+
+  return SPV_SUCCESS;
+}
+
+}  // namespace val
+}  // namespace spvtools

spirv-tools/spirv-tools/build-version.inc

@@ -1 +1 @@
-"v2026.2-dev", "SPIRV-Tools v2026.2-dev v2026.1-9-g1c69c179"
+"v2026.2-dev", "SPIRV-Tools v2026.2-dev v2026.1-10-g3ac12f1e"