Delete old irrelevant AMDESE/linux branches from svsm-vtpm/linux? #1

crobinso · 2023-02-26T19:41:01Z

This repo, svsm-vtpm/linux, is forked from AMDESE/linux. The fork brought over 60+ old branches with it. Can someone with admin access cull the old braches here? So far this repo only serves to host svsm-vtpm-preview-guest so maybe every other branch can be deleted.

This will make it more clear in github UI what the interesting content is, and simplify git branch -a output locally

Since issues are closed, I'm filing this as a bogus PR just to communicate with repo owners. Please disregard the commit.

Signed-off-by: Cole Robinson <crobinso@redhat.com>

The behavior of the SEV-legacy commands is altered when the SNP firmware is in the INIT state. When SNP is in INIT state, all the SEV-legacy commands that cause the firmware to write to memory must be in the firmware state before issuing the command.. A command buffer may contains a system physical address that the firmware may write to. There are two cases that need to be handled: 1) system physical address points to a guest memory 2) system physical address points to a host memory To handle the case svsm-vtpm#1, change the page state to the firmware in the RMP table before issuing the command and restore the state to shared after the command completes. For the case AMDESE#2, use a bounce buffer to complete the request. Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>

Change num_ghes from int to unsigned int, preventing an overflow and causing subsequent vmalloc to fail. The overflow happens in the ghes_estatus_pool_init() when calculating len during execution of the statement below as both multiplication operands here are signed int : len += (num_ghes * GHES_ESOURCE_PREALLOC_MAX_SIZE); The following call trace is observed because of this bug: [ 9.317108] swapper/0: vmalloc error: size 18446744071562596352, exceeds total pages, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0-1 [ 9.317125] CPU: 256 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc6-snp-host-61a51248451b svsm-vtpm#1 [ 9.317129] Hardware name: AMD Corporation QUARTZ/QUARTZ, BIOS TQZ1002E 09/28/2022 [ 9.317131] Call Trace: [ 9.317134] <TASK> [ 9.317137] dump_stack_lvl+0x49/0x5f [ 9.317145] dump_stack+0x10/0x12 [ 9.317146] warn_alloc.cold+0x7b/0xdf [ 9.317150] ? __device_attach+0x16a/0x1b0 [ 9.317155] __vmalloc_node_range+0x702/0x740 [ 9.317160] ? device_add+0x17f/0x920 [ 9.317164] ? dev_set_name+0x53/0x70 [ 9.317166] ? platform_device_add+0xf9/0x240 [ 9.317168] __vmalloc_node+0x49/0x50 [ 9.317170] ? ghes_estatus_pool_init+0x43/0xa0 [ 9.317176] vmalloc+0x21/0x30 [ 9.317177] ghes_estatus_pool_init+0x43/0xa0 [ 9.317179] acpi_hest_init+0x129/0x19c [ 9.317185] acpi_init+0x434/0x4a4 [ 9.317188] ? acpi_sleep_proc_init+0x2a/0x2a [ 9.317190] do_one_initcall+0x48/0x200 [ 9.317195] kernel_init_freeable+0x221/0x284 [ 9.317200] ? rest_init+0xe0/0xe0 [ 9.317204] kernel_init+0x1a/0x130 [ 9.317205] ret_from_fork+0x22/0x30 [ 9.317208] </TASK> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>

Marek reported a BUG resulting from the recent parallel faults changes, as the hyp stage-1 map walker attempted to allocate table memory while holding the RCU read lock: BUG: sleeping function called from invalid context at include/linux/sched/mm.h:274 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0 preempt_count: 0, expected: 0 RCU nest depth: 1, expected: 0 2 locks held by swapper/0/1: #0: ffff80000a8a44d0 (kvm_hyp_pgd_mutex){+.+.}-{3:3}, at: __create_hyp_mappings+0x80/0xc4 svsm-vtpm#1: ffff80000a927720 (rcu_read_lock){....}-{1:2}, at: kvm_pgtable_walk+0x0/0x1f4 CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc3+ #5918 Hardware name: Raspberry Pi 3 Model B (DT) Call trace: dump_backtrace.part.0+0xe4/0xf0 show_stack+0x18/0x40 dump_stack_lvl+0x8c/0xb8 dump_stack+0x18/0x34 __might_resched+0x178/0x220 __might_sleep+0x48/0xa0 prepare_alloc_pages+0x178/0x1a0 __alloc_pages+0x9c/0x109c alloc_page_interleave+0x1c/0xc4 alloc_pages+0xec/0x160 get_zeroed_page+0x1c/0x44 kvm_hyp_zalloc_page+0x14/0x20 hyp_map_walker+0xd4/0x134 kvm_pgtable_visitor_cb.isra.0+0x38/0x5c __kvm_pgtable_walk+0x1a4/0x220 kvm_pgtable_walk+0x104/0x1f4 kvm_pgtable_hyp_map+0x80/0xc4 __create_hyp_mappings+0x9c/0xc4 kvm_mmu_init+0x144/0x1cc kvm_arch_init+0xe4/0xef4 kvm_init+0x3c/0x3d0 arm_init+0x20/0x30 do_one_initcall+0x74/0x400 kernel_init_freeable+0x2e0/0x350 kernel_init+0x24/0x130 ret_from_fork+0x10/0x20 Since the hyp stage-1 table walkers are serialized by kvm_hyp_pgd_mutex, RCU protection really doesn't add anything. Don't acquire the RCU read lock for an exclusive walk. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221118182222.3932898-3-oliver.upton@linux.dev

Map the leaf SPTE when handling a TDP MMU page fault if and only if the target level is reached. A recent commit reworked the retry logic and incorrectly assumed that walking SPTEs would never "fail", as the loop either bails (retries) or installs parent SPs. However, the iterator itself will bail early if it detects a frozen (REMOVED) SPTE when stepping down. The TDP iterator also rereads the current SPTE before stepping down specifically to avoid walking into a part of the tree that is being removed, which means it's possible to terminate the loop without the guts of the loop observing the frozen SPTE, e.g. if a different task zaps a parent SPTE between the initial read and try_step_down()'s refresh. Mapping a leaf SPTE at the wrong level results in all kinds of badness as page table walkers interpret the SPTE as a page table, not a leaf, and walk into the weeds. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1025 at arch/x86/kvm/mmu/tdp_mmu.c:1070 kvm_tdp_mmu_map+0x481/0x510 Modules linked in: kvm_intel CPU: 1 PID: 1025 Comm: nx_huge_pages_t Tainted: G W 6.1.0-rc4+ torvalds#64 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_tdp_mmu_map+0x481/0x510 RSP: 0018:ffffc9000072fba8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffffc9000072fcc0 RCX: 0000000000000027 RDX: 0000000000000027 RSI: 00000000ffffdfff RDI: ffff888277c5b4c8 RBP: ffff888107d45a10 R08: ffff888277c5b4c0 R09: ffffc9000072fa48 R10: 0000000000000001 R11: 0000000000000001 R12: ffffc9000073a0e0 R13: ffff88810fc54800 R14: ffff888107d1ae60 R15: ffff88810fc54f90 FS: 00007fba9f853740(0000) GS:ffff888277c40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000010aa7a003 CR4: 0000000000172ea0 Call Trace: <TASK> kvm_tdp_page_fault+0x10c/0x130 kvm_mmu_page_fault+0x103/0x680 vmx_handle_exit+0x132/0x5a0 [kvm_intel] vcpu_enter_guest+0x60c/0x16f0 kvm_arch_vcpu_ioctl_run+0x1e2/0x9d0 kvm_vcpu_ioctl+0x271/0x660 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x2b/0x50 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> ---[ end trace 0000000000000000 ]--- Invalid SPTE change: cannot replace a present leaf SPTE with another present leaf SPTE mapping a different PFN! as_id: 0 gfn: 100200 old_spte: 600000112400bf3 new_spte: 6000001126009f3 level: 2 ------------[ cut here ]------------ kernel BUG at arch/x86/kvm/mmu/tdp_mmu.c:559! invalid opcode: 0000 [svsm-vtpm#1] SMP CPU: 1 PID: 1025 Comm: nx_huge_pages_t Tainted: G W 6.1.0-rc4+ torvalds#64 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:__handle_changed_spte.cold+0x95/0x9c RSP: 0018:ffffc9000072faf8 EFLAGS: 00010246 RAX: 00000000000000c1 RBX: ffffc90000731000 RCX: 0000000000000027 RDX: 0000000000000000 RSI: 00000000ffffdfff RDI: ffff888277c5b4c8 RBP: 0600000112400bf3 R08: ffff888277c5b4c0 R09: ffffc9000072f9a0 R10: 0000000000000001 R11: 0000000000000001 R12: 06000001126009f3 R13: 0000000000000002 R14: 0000000012600901 R15: 0000000012400b01 FS: 00007fba9f853740(0000) GS:ffff888277c40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000010aa7a003 CR4: 0000000000172ea0 Call Trace: <TASK> kvm_tdp_mmu_map+0x3b0/0x510 kvm_tdp_page_fault+0x10c/0x130 kvm_mmu_page_fault+0x103/0x680 vmx_handle_exit+0x132/0x5a0 [kvm_intel] vcpu_enter_guest+0x60c/0x16f0 kvm_arch_vcpu_ioctl_run+0x1e2/0x9d0 kvm_vcpu_ioctl+0x271/0x660 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x2b/0x50 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> Modules linked in: kvm_intel ---[ end trace 0000000000000000 ]--- Fixes: 63d28a2 ("KVM: x86/mmu: simplify kvm_tdp_mmu_map flow when guest has to retry") Cc: Robert Hoo <robert.hu@linux.intel.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221213033030.83345-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Don't install a leaf TDP MMU SPTE if the parent page's level doesn't match the target level of the fault, and instead have the vCPU retry the faulting instruction after warning. Continuing on is completely unnecessary as the absolute worst case scenario of retrying is DoSing the vCPU, whereas continuing on all but guarantees bigger explosions, e.g. ------------[ cut here ]------------ kernel BUG at arch/x86/kvm/mmu/tdp_mmu.c:559! invalid opcode: 0000 [svsm-vtpm#1] SMP CPU: 1 PID: 1025 Comm: nx_huge_pages_t Tainted: G W 6.1.0-rc4+ torvalds#64 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:__handle_changed_spte.cold+0x95/0x9c RSP: 0018:ffffc9000072faf8 EFLAGS: 00010246 RAX: 00000000000000c1 RBX: ffffc90000731000 RCX: 0000000000000027 RDX: 0000000000000000 RSI: 00000000ffffdfff RDI: ffff888277c5b4c8 RBP: 0600000112400bf3 R08: ffff888277c5b4c0 R09: ffffc9000072f9a0 R10: 0000000000000001 R11: 0000000000000001 R12: 06000001126009f3 R13: 0000000000000002 R14: 0000000012600901 R15: 0000000012400b01 FS: 00007fba9f853740(0000) GS:ffff888277c40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000010aa7a003 CR4: 0000000000172ea0 Call Trace: <TASK> kvm_tdp_mmu_map+0x3b0/0x510 kvm_tdp_page_fault+0x10c/0x130 kvm_mmu_page_fault+0x103/0x680 vmx_handle_exit+0x132/0x5a0 [kvm_intel] vcpu_enter_guest+0x60c/0x16f0 kvm_arch_vcpu_ioctl_run+0x1e2/0x9d0 kvm_vcpu_ioctl+0x271/0x660 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x2b/0x50 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> Modules linked in: kvm_intel ---[ end trace 0000000000000000 ]--- Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221213033030.83345-5-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Call kvm_init() only after _all_ setup is complete, as kvm_init() exposes /dev/kvm to userspace and thus allows userspace to create VMs (and call other ioctls). E.g. KVM will encounter a NULL pointer when attempting to add a vCPU to the per-CPU loaded_vmcss_on_cpu list if userspace is able to create a VM before vmx_init() configures said list. BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [svsm-vtpm#1] SMP CPU: 6 PID: 1143 Comm: stable Not tainted 6.0.0-rc7+ torvalds#988 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:vmx_vcpu_load_vmcs+0x68/0x230 [kvm_intel] <TASK> vmx_vcpu_load+0x16/0x60 [kvm_intel] kvm_arch_vcpu_load+0x32/0x1f0 [kvm] vcpu_load+0x2f/0x40 [kvm] kvm_arch_vcpu_create+0x231/0x310 [kvm] kvm_vm_ioctl+0x79f/0xe10 [kvm] ? handle_mm_fault+0xb1/0x220 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x2b/0x50 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f5a6b05743b </TASK> Modules linked in: vhost_net vhost vhost_iotlb tap kvm_intel(+) kvm irqbypass Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221130230934.1014142-15-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Acquire a new mutex, vendor_module_lock, in kvm_x86_vendor_init() while doing hardware setup to ensure that concurrent calls are fully serialized. KVM rejects attempts to load vendor modules if a different module has already been loaded, but doesn't handle the case where multiple vendor modules are loaded at the same time, and module_init() doesn't run under the global module_mutex. Note, in practice, this is likely a benign bug as no platform exists that supports both SVM and VMX, i.e. barring a weird VM setup, one of the vendor modules is guaranteed to fail a support check before modifying common KVM state. Alternatively, KVM could perform an atomic CMPXCHG on .hardware_enable, but that comes with its own ugliness as it would require setting .hardware_enable before success is guaranteed, e.g. attempting to load the "wrong" could result in spurious failure to load the "right" module. Introduce a new mutex as using kvm_lock is extremely deadlock prone due to kvm_lock being taken under cpus_write_lock(), and in the future, under under cpus_read_lock(). Any operation that takes cpus_read_lock() while holding kvm_lock would potentially deadlock, e.g. kvm_timer_init() takes cpus_read_lock() to register a callback. In theory, KVM could avoid such problematic paths, i.e. do less setup under kvm_lock, but avoiding all calls to cpus_read_lock() is subtly difficult and thus fragile. E.g. updating static calls also acquires cpus_read_lock(). Inverting the lock ordering, i.e. always taking kvm_lock outside cpus_read_lock(), is not a viable option as kvm_lock is taken in various callbacks that may be invoked under cpus_read_lock(), e.g. x86's kvmclock_cpufreq_notifier(). The lockdep splat below is dependent on future patches to take cpus_read_lock() in hardware_enable_all(), but as above, deadlock is already is already possible. ====================================================== WARNING: possible circular locking dependency detected 6.0.0-smp--7ec93244f194-init2 torvalds#27 Tainted: G O ------------------------------------------------------ stable/251833 is trying to acquire lock: ffffffffc097ea28 (kvm_lock){+.+.}-{3:3}, at: hardware_enable_all+0x1f/0xc0 [kvm] but task is already holding lock: ffffffffa2456828 (cpu_hotplug_lock){++++}-{0:0}, at: hardware_enable_all+0xf/0xc0 [kvm] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> svsm-vtpm#1 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x2a/0xa0 __cpuhp_setup_state+0x2b/0x60 __kvm_x86_vendor_init+0x16a/0x1870 [kvm] kvm_x86_vendor_init+0x23/0x40 [kvm] 0xffffffffc0a4d02b do_one_initcall+0x110/0x200 do_init_module+0x4f/0x250 load_module+0x1730/0x18f0 __se_sys_finit_module+0xca/0x100 __x64_sys_finit_module+0x1d/0x20 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd -> #0 (kvm_lock){+.+.}-{3:3}: __lock_acquire+0x16f4/0x30d0 lock_acquire+0xb2/0x190 __mutex_lock+0x98/0x6f0 mutex_lock_nested+0x1b/0x20 hardware_enable_all+0x1f/0xc0 [kvm] kvm_dev_ioctl+0x45e/0x930 [kvm] __se_sys_ioctl+0x77/0xc0 __x64_sys_ioctl+0x1d/0x20 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(cpu_hotplug_lock); lock(kvm_lock); lock(cpu_hotplug_lock); lock(kvm_lock); *** DEADLOCK *** 1 lock held by stable/251833: #0: ffffffffa2456828 (cpu_hotplug_lock){++++}-{0:0}, at: hardware_enable_all+0xf/0xc0 [kvm] Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221130230934.1014142-16-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

… path Rework detecting hardware enabling errors to use a local variable in the "enable all" path to track whether or not enabling was successful across all CPUs. Using a global variable complicates paths that enable hardware only on the current CPU, e.g. kvm_resume() and kvm_online_cpu(). Opportunistically add a WARN if hardware enabling fails during kvm_resume(), KVM is all kinds of hosed if CPU0 fails to enable hardware. The WARN is largely futile in the current code, as KVM BUG()s on spurious faults on VMX instructions, e.g. attempting to run a vCPU on CPU if hardware enabling fails will explode. ------------[ cut here ]------------ kernel BUG at arch/x86/kvm/x86.c:508! invalid opcode: 0000 [svsm-vtpm#1] SMP CPU: 3 PID: 1009 Comm: CPU 4/KVM Not tainted 6.1.0-rc1+ torvalds#11 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_spurious_fault+0xa/0x10 Call Trace: vmx_vcpu_load_vmcs+0x192/0x230 [kvm_intel] vmx_vcpu_load+0x16/0x60 [kvm_intel] kvm_arch_vcpu_load+0x32/0x1f0 vcpu_load+0x2f/0x40 kvm_arch_vcpu_ioctl_run+0x19/0x9d0 kvm_vcpu_ioctl+0x271/0x660 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x2b/0x50 entry_SYSCALL_64_after_hwframe+0x46/0xb0 But, the WARN may provide a breadcrumb to understand what went awry, and someday KVM may fix one or both of those bugs, e.g. by finding a way to eat spurious faults no matter the context (easier said than done due to side effects of certain operations, e.g. Intel's VMCLEAR). Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> [sean: rebase, WARN on failure in kvm_resume()] Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221130230934.1014142-48-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The behavior of the SEV-legacy commands is altered when the SNP firmware is in the INIT state. When SNP is in INIT state, all the SEV-legacy commands that cause the firmware to write to memory must be in the firmware state before issuing the command.. A command buffer may contains a system physical address that the firmware may write to. There are two cases that need to be handled: 1) system physical address points to a guest memory 2) system physical address points to a host memory To handle the case svsm-vtpm#1, change the page state to the firmware in the RMP table before issuing the command and restore the state to shared after the command completes. For the case AMDESE#2, use a bounce buffer to complete the request. Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Signed-off-by: Michael Roth <michael.roth@amd.com>

If a task creates a new block group and that block group becomes unused before we finish its creation, at btrfs_create_pending_block_groups(), then when btrfs_mark_bg_unused() is called against the block group, we assume that the block group is currently in the list of block groups to reclaim, and we move it out of the list of new block groups and into the list of unused block groups. This has two consequences: 1) We move it out of the list of new block groups associated to the current transaction. So the block group creation is not finished and if we attempt to delete the bg because it's unused, we will not find the block group item in the extent tree (or the new block group tree), its device extent items in the device tree etc, resulting in the deletion to fail due to the missing items; 2) We don't increment the reference count on the block group when we move it to the list of unused block groups, because we assumed the block group was on the list of block groups to reclaim, and in that case it already has the correct reference count. However the block group was on the list of new block groups, in which case no extra reference was taken because it's local to the current task. This later results in doing an extra reference count decrement when removing the block group from the unused list, eventually leading the reference count to 0. This second case was caught when running generic/297 from fstests, which produced the following assertion failure and stack trace: [589.559] assertion failed: refcount_read(&block_group->refs) == 1, in fs/btrfs/block-group.c:4299 [589.559] ------------[ cut here ]------------ [589.559] kernel BUG at fs/btrfs/block-group.c:4299! [589.560] invalid opcode: 0000 [#1] PREEMPT SMP PTI [589.560] CPU: 8 PID: 2819134 Comm: umount Tainted: G W 6.4.0-rc6-btrfs-next-134+ #1 [589.560] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [589.560] RIP: 0010:btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.561] Code: 68 62 da c0 (...) [589.561] RSP: 0018:ffffa55a8c3b3d98 EFLAGS: 00010246 [589.561] RAX: 0000000000000058 RBX: ffff8f030d7f2000 RCX: 0000000000000000 [589.562] RDX: 0000000000000000 RSI: ffffffff953f0878 RDI: 00000000ffffffff [589.562] RBP: ffff8f030d7f2088 R08: 0000000000000000 R09: ffffa55a8c3b3c50 [589.562] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8f05850b4c00 [589.562] R13: ffff8f030d7f2090 R14: ffff8f05850b4cd8 R15: dead000000000100 [589.563] FS: 00007f497fd2e840(0000) GS:ffff8f09dfc00000(0000) knlGS:0000000000000000 [589.563] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [589.563] CR2: 00007f497ff8ec10 CR3: 0000000271472006 CR4: 0000000000370ee0 [589.563] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [589.564] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [589.564] Call Trace: [589.564] <TASK> [589.565] ? __die_body+0x1b/0x60 [589.565] ? die+0x39/0x60 [589.565] ? do_trap+0xeb/0x110 [589.565] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.566] ? do_error_trap+0x6a/0x90 [589.566] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.566] ? exc_invalid_op+0x4e/0x70 [589.566] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.567] ? asm_exc_invalid_op+0x16/0x20 [589.567] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.567] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.567] close_ctree+0x35d/0x560 [btrfs] [589.568] ? fsnotify_sb_delete+0x13e/0x1d0 [589.568] ? dispose_list+0x3a/0x50 [589.568] ? evict_inodes+0x151/0x1a0 [589.568] generic_shutdown_super+0x73/0x1a0 [589.569] kill_anon_super+0x14/0x30 [589.569] btrfs_kill_super+0x12/0x20 [btrfs] [589.569] deactivate_locked_super+0x2e/0x70 [589.569] cleanup_mnt+0x104/0x160 [589.570] task_work_run+0x56/0x90 [589.570] exit_to_user_mode_prepare+0x160/0x170 [589.570] syscall_exit_to_user_mode+0x22/0x50 [589.570] ? __x64_sys_umount+0x12/0x20 [589.571] do_syscall_64+0x48/0x90 [589.571] entry_SYSCALL_64_after_hwframe+0x72/0xdc [589.571] RIP: 0033:0x7f497ff0a567 [589.571] Code: af 98 0e (...) [589.572] RSP: 002b:00007ffc98347358 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [589.572] RAX: 0000000000000000 RBX: 00007f49800b8264 RCX: 00007f497ff0a567 [589.572] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000557f558abfa0 [589.573] RBP: 0000557f558a6ba0 R08: 0000000000000000 R09: 00007ffc98346100 [589.573] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [589.573] R13: 0000557f558abfa0 R14: 0000557f558a6cb0 R15: 0000557f558a6dd0 [589.573] </TASK> [589.574] Modules linked in: dm_snapshot dm_thin_pool (...) [589.576] ---[ end trace 0000000000000000 ]--- Fix this by adding a runtime flag to the block group to tell that the block group is still in the list of new block groups, and therefore it should not be moved to the list of unused block groups, at btrfs_mark_bg_unused(), until the flag is cleared, when we finish the creation of the block group at btrfs_create_pending_block_groups(). Fixes: a9f1897 ("btrfs: move out now unused BG from the reclaim list") CC: stable@vger.kernel.org # 5.15+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

Calling ethtool during reload can lead to call trace, because VSI isn't configured for some time, but netdev is alive. To fix it add rtnl lock for VSI deconfig and config. Set ::num_q_vectors to 0 after freeing and add a check for ::tx/rx_rings in ring related ethtool ops. Add proper unroll of filters in ice_start_eth(). Reproduction: $watch -n 0.1 -d 'ethtool -g enp24s0f0np0' $devlink dev reload pci/0000:18:00.0 action driver_reinit Call trace before fix: [66303.926205] BUG: kernel NULL pointer dereference, address: 0000000000000000 [66303.926259] #PF: supervisor read access in kernel mode [66303.926286] #PF: error_code(0x0000) - not-present page [66303.926311] PGD 0 P4D 0 [66303.926332] Oops: 0000 [#1] PREEMPT SMP PTI [66303.926358] CPU: 4 PID: 933821 Comm: ethtool Kdump: loaded Tainted: G OE 6.4.0-rc5+ #1 [66303.926400] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.00.01.0014.070920180847 07/09/2018 [66303.926446] RIP: 0010:ice_get_ringparam+0x22/0x50 [ice] [66303.926649] Code: 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 48 8b 87 c0 09 00 00 c7 46 04 e0 1f 00 00 c7 46 10 e0 1f 00 00 48 8b 50 20 <48> 8b 12 0f b7 52 3a 89 56 14 48 8b 40 28 48 8b 00 0f b7 40 58 48 [66303.926722] RSP: 0018:ffffad40472f39c8 EFLAGS: 00010246 [66303.926749] RAX: ffff98a8ada05828 RBX: ffff98a8c46dd060 RCX: ffffad40472f3b48 [66303.926781] RDX: 0000000000000000 RSI: ffff98a8c46dd068 RDI: ffff98a8b23c4000 [66303.926811] RBP: ffffad40472f3b48 R08: 00000000000337b0 R09: 0000000000000000 [66303.926843] R10: 0000000000000001 R11: 0000000000000100 R12: ffff98a8b23c4000 [66303.926874] R13: ffff98a8c46dd060 R14: 000000000000000f R15: ffffad40472f3a50 [66303.926906] FS: 00007f6397966740(0000) GS:ffff98b390900000(0000) knlGS:0000000000000000 [66303.926941] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [66303.926967] CR2: 0000000000000000 CR3: 000000011ac20002 CR4: 00000000007706e0 [66303.926999] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [66303.927029] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [66303.927060] PKRU: 55555554 [66303.927075] Call Trace: [66303.927094] <TASK> [66303.927111] ? __die+0x23/0x70 [66303.927140] ? page_fault_oops+0x171/0x4e0 [66303.927176] ? exc_page_fault+0x7f/0x180 [66303.927209] ? asm_exc_page_fault+0x26/0x30 [66303.927244] ? ice_get_ringparam+0x22/0x50 [ice] [66303.927433] rings_prepare_data+0x62/0x80 [66303.927469] ethnl_default_doit+0xe2/0x350 [66303.927501] genl_family_rcv_msg_doit.isra.0+0xe3/0x140 [66303.927538] genl_rcv_msg+0x1b1/0x2c0 [66303.927561] ? __pfx_ethnl_default_doit+0x10/0x10 [66303.927590] ? __pfx_genl_rcv_msg+0x10/0x10 [66303.927615] netlink_rcv_skb+0x58/0x110 [66303.927644] genl_rcv+0x28/0x40 [66303.927665] netlink_unicast+0x19e/0x290 [66303.927691] netlink_sendmsg+0x254/0x4d0 [66303.927717] sock_sendmsg+0x93/0xa0 [66303.927743] __sys_sendto+0x126/0x170 [66303.927780] __x64_sys_sendto+0x24/0x30 [66303.928593] do_syscall_64+0x5d/0x90 [66303.929370] ? __count_memcg_events+0x60/0xa0 [66303.930146] ? count_memcg_events.constprop.0+0x1a/0x30 [66303.930920] ? handle_mm_fault+0x9e/0x350 [66303.931688] ? do_user_addr_fault+0x258/0x740 [66303.932452] ? exc_page_fault+0x7f/0x180 [66303.933193] entry_SYSCALL_64_after_hwframe+0x72/0xdc Fixes: 5b246e5 ("ice: split probe into smaller functions") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Arrays passed to reg_in_range_table should end with empty record. The patch solves KASAN detected bug with signature: BUG: KASAN: global-out-of-bounds in xehp_is_valid_b_counter_addr+0x2c7/0x350 [i915] Read of size 4 at addr ffffffffa1555d90 by task perf/1518 CPU: 4 PID: 1518 Comm: perf Tainted: G U 6.4.0-kasan_438-g3303d06107f3+ #1 Hardware name: Intel Corporation Meteor Lake Client Platform/MTL-P DDR5 SODIMM SBS RVP, BIOS MTLPFWI1.R00.3223.D80.2305311348 05/31/2023 Call Trace: <TASK> ... xehp_is_valid_b_counter_addr+0x2c7/0x350 [i915] Fixes: 0fa9349 ("drm/i915/perf: complete programming whitelisting for XEHPSDV") Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230711153410.1224997-1-andrzej.hajda@intel.com (cherry picked from commit 2f42c5a) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

We do netif_napi_add() for all allocated q_vectors[], but potentially do netif_napi_del() for part of them, then kfree q_vectors and leave invalid pointers at dev->napi_list. Reproducer: [root@host ~]# cat repro.sh #!/bin/bash pf_dbsf="0000:41:00.0" vf0_dbsf="0000:41:02.0" g_pids=() function do_set_numvf() { echo 2 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) echo 0 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) } function do_set_channel() { local nic=$(ls -1 --indicator-style=none /sys/bus/pci/devices/${vf0_dbsf}/net/) [ -z "$nic" ] && { sleep $((RANDOM%3)) ; return 1; } ifconfig $nic 192.168.18.5 netmask 255.255.255.0 ifconfig $nic up ethtool -L $nic combined 1 ethtool -L $nic combined 4 sleep $((RANDOM%3)) } function on_exit() { local pid for pid in "${g_pids[@]}"; do kill -0 "$pid" &>/dev/null && kill "$pid" &>/dev/null done g_pids=() } trap "on_exit; exit" EXIT while :; do do_set_numvf ; done & g_pids+=($!) while :; do do_set_channel ; done & g_pids+=($!) wait Result: [ 4093.900222] ================================================================== [ 4093.900230] BUG: KASAN: use-after-free in free_netdev+0x308/0x390 [ 4093.900232] Read of size 8 at addr ffff88b4dc145640 by task repro.sh/6699 [ 4093.900233] [ 4093.900236] CPU: 10 PID: 6699 Comm: repro.sh Kdump: loaded Tainted: G O --------- -t - 4.18.0 #1 [ 4093.900238] Hardware name: Powerleader PR2008AL/H12DSi-N6, BIOS 2.0 04/09/2021 [ 4093.900239] Call Trace: [ 4093.900244] dump_stack+0x71/0xab [ 4093.900249] print_address_description+0x6b/0x290 [ 4093.900251] ? free_netdev+0x308/0x390 [ 4093.900252] kasan_report+0x14a/0x2b0 [ 4093.900254] free_netdev+0x308/0x390 [ 4093.900261] iavf_remove+0x825/0xd20 [iavf] [ 4093.900265] pci_device_remove+0xa8/0x1f0 [ 4093.900268] device_release_driver_internal+0x1c6/0x460 [ 4093.900271] pci_stop_bus_device+0x101/0x150 [ 4093.900273] pci_stop_and_remove_bus_device+0xe/0x20 [ 4093.900275] pci_iov_remove_virtfn+0x187/0x420 [ 4093.900277] ? pci_iov_add_virtfn+0xe10/0xe10 [ 4093.900278] ? pci_get_subsys+0x90/0x90 [ 4093.900280] sriov_disable+0xed/0x3e0 [ 4093.900282] ? bus_find_device+0x12d/0x1a0 [ 4093.900290] i40e_free_vfs+0x754/0x1210 [i40e] [ 4093.900298] ? i40e_reset_all_vfs+0x880/0x880 [i40e] [ 4093.900299] ? pci_get_device+0x7c/0x90 [ 4093.900300] ? pci_get_subsys+0x90/0x90 [ 4093.900306] ? pci_vfs_assigned.part.7+0x144/0x210 [ 4093.900309] ? __mutex_lock_slowpath+0x10/0x10 [ 4093.900315] i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e] [ 4093.900318] sriov_numvfs_store+0x214/0x290 [ 4093.900320] ? sriov_totalvfs_show+0x30/0x30 [ 4093.900321] ? __mutex_lock_slowpath+0x10/0x10 [ 4093.900323] ? __check_object_size+0x15a/0x350 [ 4093.900326] kernfs_fop_write+0x280/0x3f0 [ 4093.900329] vfs_write+0x145/0x440 [ 4093.900330] ksys_write+0xab/0x160 [ 4093.900332] ? __ia32_sys_read+0xb0/0xb0 [ 4093.900334] ? fput_many+0x1a/0x120 [ 4093.900335] ? filp_close+0xf0/0x130 [ 4093.900338] do_syscall_64+0xa0/0x370 [ 4093.900339] ? page_fault+0x8/0x30 [ 4093.900341] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 4093.900357] RIP: 0033:0x7f16ad4d22c0 [ 4093.900359] Code: 73 01 c3 48 8b 0d d8 cb 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 89 24 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 fe dd 01 00 48 89 04 24 [ 4093.900360] RSP: 002b:00007ffd6491b7f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 4093.900362] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f16ad4d22c0 [ 4093.900363] RDX: 0000000000000002 RSI: 0000000001a41408 RDI: 0000000000000001 [ 4093.900364] RBP: 0000000001a41408 R08: 00007f16ad7a1780 R09: 00007f16ae1f2700 [ 4093.900364] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000002 [ 4093.900365] R13: 0000000000000001 R14: 00007f16ad7a0620 R15: 0000000000000001 [ 4093.900367] [ 4093.900368] Allocated by task 820: [ 4093.900371] kasan_kmalloc+0xa6/0xd0 [ 4093.900373] __kmalloc+0xfb/0x200 [ 4093.900376] iavf_init_interrupt_scheme+0x63b/0x1320 [iavf] [ 4093.900380] iavf_watchdog_task+0x3d51/0x52c0 [iavf] [ 4093.900382] process_one_work+0x56a/0x11f0 [ 4093.900383] worker_thread+0x8f/0xf40 [ 4093.900384] kthread+0x2a0/0x390 [ 4093.900385] ret_from_fork+0x1f/0x40 [ 4093.900387] 0xffffffffffffffff [ 4093.900387] [ 4093.900388] Freed by task 6699: [ 4093.900390] __kasan_slab_free+0x137/0x190 [ 4093.900391] kfree+0x8b/0x1b0 [ 4093.900394] iavf_free_q_vectors+0x11d/0x1a0 [iavf] [ 4093.900397] iavf_remove+0x35a/0xd20 [iavf] [ 4093.900399] pci_device_remove+0xa8/0x1f0 [ 4093.900400] device_release_driver_internal+0x1c6/0x460 [ 4093.900401] pci_stop_bus_device+0x101/0x150 [ 4093.900402] pci_stop_and_remove_bus_device+0xe/0x20 [ 4093.900403] pci_iov_remove_virtfn+0x187/0x420 [ 4093.900404] sriov_disable+0xed/0x3e0 [ 4093.900409] i40e_free_vfs+0x754/0x1210 [i40e] [ 4093.900415] i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e] [ 4093.900416] sriov_numvfs_store+0x214/0x290 [ 4093.900417] kernfs_fop_write+0x280/0x3f0 [ 4093.900418] vfs_write+0x145/0x440 [ 4093.900419] ksys_write+0xab/0x160 [ 4093.900420] do_syscall_64+0xa0/0x370 [ 4093.900421] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 4093.900422] 0xffffffffffffffff [ 4093.900422] [ 4093.900424] The buggy address belongs to the object at ffff88b4dc144200 which belongs to the cache kmalloc-8k of size 8192 [ 4093.900425] The buggy address is located 5184 bytes inside of 8192-byte region [ffff88b4dc144200, ffff88b4dc146200) [ 4093.900425] The buggy address belongs to the page: [ 4093.900427] page:ffffea00d3705000 refcount:1 mapcount:0 mapping:ffff88bf04415c80 index:0x0 compound_mapcount: 0 [ 4093.900430] flags: 0x10000000008100(slab|head) [ 4093.900433] raw: 0010000000008100 dead000000000100 dead000000000200 ffff88bf04415c80 [ 4093.900434] raw: 0000000000000000 0000000000030003 00000001ffffffff 0000000000000000 [ 4093.900434] page dumped because: kasan: bad access detected [ 4093.900435] [ 4093.900435] Memory state around the buggy address: [ 4093.900436] ffff88b4dc145500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900437] ffff88b4dc145580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900438] >ffff88b4dc145600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900438] ^ [ 4093.900439] ffff88b4dc145680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900440] ffff88b4dc145700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900440] ================================================================== Although the patch AMDESE#2 (of 2) can avoid the issue triggered by this repro.sh, there still are other potential risks that if num_active_queues is changed to less than allocated q_vectors[] by unexpected, the mismatched netif_napi_add/del() can also cause UAF. Since we actually call netif_napi_add() for all allocated q_vectors unconditionally in iavf_alloc_q_vectors(), so we should fix it by letting netif_napi_del() match to netif_napi_add(). Fixes: 5eae00c ("i40evf: main driver core") Signed-off-by: Ding Hui <dinghui@sangfor.com.cn> Cc: Donglin Peng <pengdonglin@sangfor.com.cn> Cc: Huang Cun <huangcun@sangfor.com.cn> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

If we set channels greater during iavf_remove(), and waiting reset done would be timeout, then returned with error but changed num_active_queues directly, that will lead to OOB like the following logs. Because the num_active_queues is greater than tx/rx_rings[] allocated actually. Reproducer: [root@host ~]# cat repro.sh #!/bin/bash pf_dbsf="0000:41:00.0" vf0_dbsf="0000:41:02.0" g_pids=() function do_set_numvf() { echo 2 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) echo 0 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) } function do_set_channel() { local nic=$(ls -1 --indicator-style=none /sys/bus/pci/devices/${vf0_dbsf}/net/) [ -z "$nic" ] && { sleep $((RANDOM%3)) ; return 1; } ifconfig $nic 192.168.18.5 netmask 255.255.255.0 ifconfig $nic up ethtool -L $nic combined 1 ethtool -L $nic combined 4 sleep $((RANDOM%3)) } function on_exit() { local pid for pid in "${g_pids[@]}"; do kill -0 "$pid" &>/dev/null && kill "$pid" &>/dev/null done g_pids=() } trap "on_exit; exit" EXIT while :; do do_set_numvf ; done & g_pids+=($!) while :; do do_set_channel ; done & g_pids+=($!) wait Result: [ 3506.152887] iavf 0000:41:02.0: Removing device [ 3510.400799] ================================================================== [ 3510.400820] BUG: KASAN: slab-out-of-bounds in iavf_free_all_tx_resources+0x156/0x160 [iavf] [ 3510.400823] Read of size 8 at addr ffff88b6f9311008 by task repro.sh/55536 [ 3510.400823] [ 3510.400830] CPU: 101 PID: 55536 Comm: repro.sh Kdump: loaded Tainted: G O --------- -t - 4.18.0 #1 [ 3510.400832] Hardware name: Powerleader PR2008AL/H12DSi-N6, BIOS 2.0 04/09/2021 [ 3510.400835] Call Trace: [ 3510.400851] dump_stack+0x71/0xab [ 3510.400860] print_address_description+0x6b/0x290 [ 3510.400865] ? iavf_free_all_tx_resources+0x156/0x160 [iavf] [ 3510.400868] kasan_report+0x14a/0x2b0 [ 3510.400873] iavf_free_all_tx_resources+0x156/0x160 [iavf] [ 3510.400880] iavf_remove+0x2b6/0xc70 [iavf] [ 3510.400884] ? iavf_free_all_rx_resources+0x160/0x160 [iavf] [ 3510.400891] ? wait_woken+0x1d0/0x1d0 [ 3510.400895] ? notifier_call_chain+0xc1/0x130 [ 3510.400903] pci_device_remove+0xa8/0x1f0 [ 3510.400910] device_release_driver_internal+0x1c6/0x460 [ 3510.400916] pci_stop_bus_device+0x101/0x150 [ 3510.400919] pci_stop_and_remove_bus_device+0xe/0x20 [ 3510.400924] pci_iov_remove_virtfn+0x187/0x420 [ 3510.400927] ? pci_iov_add_virtfn+0xe10/0xe10 [ 3510.400929] ? pci_get_subsys+0x90/0x90 [ 3510.400932] sriov_disable+0xed/0x3e0 [ 3510.400936] ? bus_find_device+0x12d/0x1a0 [ 3510.400953] i40e_free_vfs+0x754/0x1210 [i40e] [ 3510.400966] ? i40e_reset_all_vfs+0x880/0x880 [i40e] [ 3510.400968] ? pci_get_device+0x7c/0x90 [ 3510.400970] ? pci_get_subsys+0x90/0x90 [ 3510.400982] ? pci_vfs_assigned.part.7+0x144/0x210 [ 3510.400987] ? __mutex_lock_slowpath+0x10/0x10 [ 3510.400996] i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e] [ 3510.401001] sriov_numvfs_store+0x214/0x290 [ 3510.401005] ? sriov_totalvfs_show+0x30/0x30 [ 3510.401007] ? __mutex_lock_slowpath+0x10/0x10 [ 3510.401011] ? __check_object_size+0x15a/0x350 [ 3510.401018] kernfs_fop_write+0x280/0x3f0 [ 3510.401022] vfs_write+0x145/0x440 [ 3510.401025] ksys_write+0xab/0x160 [ 3510.401028] ? __ia32_sys_read+0xb0/0xb0 [ 3510.401031] ? fput_many+0x1a/0x120 [ 3510.401032] ? filp_close+0xf0/0x130 [ 3510.401038] do_syscall_64+0xa0/0x370 [ 3510.401041] ? page_fault+0x8/0x30 [ 3510.401043] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 3510.401073] RIP: 0033:0x7f3a9bb842c0 [ 3510.401079] Code: 73 01 c3 48 8b 0d d8 cb 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 89 24 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 fe dd 01 00 48 89 04 24 [ 3510.401080] RSP: 002b:00007ffc05f1fe18 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 3510.401083] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f3a9bb842c0 [ 3510.401085] RDX: 0000000000000002 RSI: 0000000002327408 RDI: 0000000000000001 [ 3510.401086] RBP: 0000000002327408 R08: 00007f3a9be53780 R09: 00007f3a9c8a4700 [ 3510.401086] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000002 [ 3510.401087] R13: 0000000000000001 R14: 00007f3a9be52620 R15: 0000000000000001 [ 3510.401090] [ 3510.401093] Allocated by task 76795: [ 3510.401098] kasan_kmalloc+0xa6/0xd0 [ 3510.401099] __kmalloc+0xfb/0x200 [ 3510.401104] iavf_init_interrupt_scheme+0x26f/0x1310 [iavf] [ 3510.401108] iavf_watchdog_task+0x1d58/0x4050 [iavf] [ 3510.401114] process_one_work+0x56a/0x11f0 [ 3510.401115] worker_thread+0x8f/0xf40 [ 3510.401117] kthread+0x2a0/0x390 [ 3510.401119] ret_from_fork+0x1f/0x40 [ 3510.401122] 0xffffffffffffffff [ 3510.401123] In timeout handling, we should keep the original num_active_queues and reset num_req_queues to 0. Fixes: 4e5e6b5 ("iavf: Fix return of set the new channel count") Signed-off-by: Ding Hui <dinghui@sangfor.com.cn> Cc: Donglin Peng <pengdonglin@sangfor.com.cn> Cc: Huang Cun <huangcun@sangfor.com.cn> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

…encies A driver's lock (crit_lock) is used to serialize all the driver's tasks. Lockdep, however, shows a circular dependency between rtnl and crit_lock. This happens when an ndo that already holds the rtnl requests the driver to reset, since the reset task (in some paths) tries to grab rtnl to either change real number of queues of update netdev features. [566.241851] ====================================================== [566.241893] WARNING: possible circular locking dependency detected [566.241936] 6.2.14-100.fc36.x86_64+debug #1 Tainted: G OE [566.241984] ------------------------------------------------------ [566.242025] repro.sh/2604 is trying to acquire lock: [566.242061] ffff9280fc5ceee8 (&adapter->crit_lock){+.+.}-{3:3}, at: iavf_close+0x3c/0x240 [iavf] [566.242167] but task is already holding lock: [566.242209] ffffffff9976d350 (rtnl_mutex){+.+.}-{3:3}, at: iavf_remove+0x6b5/0x730 [iavf] [566.242300] which lock already depends on the new lock. [566.242353] the existing dependency chain (in reverse order) is: [566.242401] -> #1 (rtnl_mutex){+.+.}-{3:3}: [566.242451] __mutex_lock+0xc1/0xbb0 [566.242489] iavf_init_interrupt_scheme+0x179/0x440 [iavf] [566.242560] iavf_watchdog_task+0x80b/0x1400 [iavf] [566.242627] process_one_work+0x2b3/0x560 [566.242663] worker_thread+0x4f/0x3a0 [566.242696] kthread+0xf2/0x120 [566.242730] ret_from_fork+0x29/0x50 [566.242763] -> #0 (&adapter->crit_lock){+.+.}-{3:3}: [566.242815] __lock_acquire+0x15ff/0x22b0 [566.242869] lock_acquire+0xd2/0x2c0 [566.242901] __mutex_lock+0xc1/0xbb0 [566.242934] iavf_close+0x3c/0x240 [iavf] [566.242997] __dev_close_many+0xac/0x120 [566.243036] dev_close_many+0x8b/0x140 [566.243071] unregister_netdevice_many_notify+0x165/0x7c0 [566.243116] unregister_netdevice_queue+0xd3/0x110 [566.243157] iavf_remove+0x6c1/0x730 [iavf] [566.243217] pci_device_remove+0x33/0xa0 [566.243257] device_release_driver_internal+0x1bc/0x240 [566.243299] pci_stop_bus_device+0x6c/0x90 [566.243338] pci_stop_and_remove_bus_device+0xe/0x20 [566.243380] pci_iov_remove_virtfn+0xd1/0x130 [566.243417] sriov_disable+0x34/0xe0 [566.243448] ice_free_vfs+0x2da/0x330 [ice] [566.244383] ice_sriov_configure+0x88/0xad0 [ice] [566.245353] sriov_numvfs_store+0xde/0x1d0 [566.246156] kernfs_fop_write_iter+0x15e/0x210 [566.246921] vfs_write+0x288/0x530 [566.247671] ksys_write+0x74/0xf0 [566.248408] do_syscall_64+0x58/0x80 [566.249145] entry_SYSCALL_64_after_hwframe+0x72/0xdc [566.249886] other info that might help us debug this: [566.252014] Possible unsafe locking scenario: [566.253432] CPU0 CPU1 [566.254118] ---- ---- [566.254800] lock(rtnl_mutex); [566.255514] lock(&adapter->crit_lock); [566.256233] lock(rtnl_mutex); [566.256897] lock(&adapter->crit_lock); [566.257388] *** DEADLOCK *** The deadlock can be triggered by a script that is continuously resetting the VF adapter while doing other operations requiring RTNL, e.g: while :; do ip link set $VF up ethtool --set-channels $VF combined 2 ip link set $VF down ip link set $VF up ethtool --set-channels $VF combined 4 ip link set $VF down done Any operation that triggers a reset can substitute "ethtool --set-channles" As a fix, add a new task "finish_config" that do all the work which needs rtnl lock. With the exception of iavf_remove(), all work that require rtnl should be called from this task. As for iavf_remove(), at the point where we need to call unregister_netdevice() (and grab rtnl_lock), we make sure the finish_config task is not running (cancel_work_sync()) to safely grab rtnl. Subsequent finish_config work cannot restart after that since the task is guarded by the __IAVF_IN_REMOVE_TASK bit in iavf_schedule_finish_config(). Fixes: 5ac49f3 ("iavf: use mutexes for locking of critical sections") Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

When making a DNS query inside the kernel using dns_query(), the request code can in rare cases end up creating a duplicate index key in the assoc_array of the destination keyring. It is eventually found by a BUG_ON() check in the assoc_array implementation and results in a crash. Example report: [2158499.700025] kernel BUG at ../lib/assoc_array.c:652! [2158499.700039] invalid opcode: 0000 [#1] SMP PTI [2158499.700065] CPU: 3 PID: 31985 Comm: kworker/3:1 Kdump: loaded Not tainted 5.3.18-150300.59.90-default #1 SLE15-SP3 [2158499.700096] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 [2158499.700351] Workqueue: cifsiod cifs_resolve_server [cifs] [2158499.700380] RIP: 0010:assoc_array_insert+0x85f/0xa40 [2158499.700401] Code: ff 74 2b 48 8b 3b 49 8b 45 18 4c 89 e6 48 83 e7 fe e8 95 ec 74 00 3b 45 88 7d db 85 c0 79 d4 0f 0b 0f 0b 0f 0b e8 41 f2 be ff <0f> 0b 0f 0b 81 7d 88 ff ff ff 7f 4c 89 eb 4c 8b ad 58 ff ff ff 0f [2158499.700448] RSP: 0018:ffffc0bd6187faf0 EFLAGS: 00010282 [2158499.700470] RAX: ffff9f1ea7da2fe8 RBX: ffff9f1ea7da2fc1 RCX: 0000000000000005 [2158499.700492] RDX: 0000000000000000 RSI: 0000000000000005 RDI: 0000000000000000 [2158499.700515] RBP: ffffc0bd6187fbb0 R08: ffff9f185faf1100 R09: 0000000000000000 [2158499.700538] R10: ffff9f1ea7da2cc0 R11: 000000005ed8cec8 R12: ffffc0bd6187fc28 [2158499.700561] R13: ffff9f15feb8d000 R14: ffff9f1ea7da2fc0 R15: ffff9f168dc0d740 [2158499.700585] FS: 0000000000000000(0000) GS:ffff9f185fac0000(0000) knlGS:0000000000000000 [2158499.700610] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [2158499.700630] CR2: 00007fdd94fca238 CR3: 0000000809d8c006 CR4: 00000000003706e0 [2158499.700702] Call Trace: [2158499.700741] ? key_alloc+0x447/0x4b0 [2158499.700768] ? __key_link_begin+0x43/0xa0 [2158499.700790] __key_link_begin+0x43/0xa0 [2158499.700814] request_key_and_link+0x2c7/0x730 [2158499.700847] ? dns_resolver_read+0x20/0x20 [dns_resolver] [2158499.700873] ? key_default_cmp+0x20/0x20 [2158499.700898] request_key_tag+0x43/0xa0 [2158499.700926] dns_query+0x114/0x2ca [dns_resolver] [2158499.701127] dns_resolve_server_name_to_ip+0x194/0x310 [cifs] [2158499.701164] ? scnprintf+0x49/0x90 [2158499.701190] ? __switch_to_asm+0x40/0x70 [2158499.701211] ? __switch_to_asm+0x34/0x70 [2158499.701405] reconn_set_ipaddr_from_hostname+0x81/0x2a0 [cifs] [2158499.701603] cifs_resolve_server+0x4b/0xd0 [cifs] [2158499.701632] process_one_work+0x1f8/0x3e0 [2158499.701658] worker_thread+0x2d/0x3f0 [2158499.701682] ? process_one_work+0x3e0/0x3e0 [2158499.701703] kthread+0x10d/0x130 [2158499.701723] ? kthread_park+0xb0/0xb0 [2158499.701746] ret_from_fork+0x1f/0x40 The situation occurs as follows: * Some kernel facility invokes dns_query() to resolve a hostname, for example, "abcdef". The function registers its global DNS resolver cache as current->cred.thread_keyring and passes the query to request_key_net() -> request_key_tag() -> request_key_and_link(). * Function request_key_and_link() creates a keyring_search_context object. Its match_data.cmp method gets set via a call to type->match_preparse() (resolves to dns_resolver_match_preparse()) to dns_resolver_cmp(). * Function request_key_and_link() continues and invokes search_process_keyrings_rcu() which returns that a given key was not found. The control is then passed to request_key_and_link() -> construct_alloc_key(). * Concurrently to that, a second task similarly makes a DNS query for "abcdef." and its result gets inserted into the DNS resolver cache. * Back on the first task, function construct_alloc_key() first runs __key_link_begin() to determine an assoc_array_edit operation to insert a new key. Index keys in the array are compared exactly as-is, using keyring_compare_object(). The operation finds that "abcdef" is not yet present in the destination keyring. * Function construct_alloc_key() continues and checks if a given key is already present on some keyring by again calling search_process_keyrings_rcu(). This search is done using dns_resolver_cmp() and "abcdef" gets matched with now present key "abcdef.". * The found key is linked on the destination keyring by calling __key_link() and using the previously calculated assoc_array_edit operation. This inserts the "abcdef." key in the array but creates a duplicity because the same index key is already present. Fix the problem by postponing __key_link_begin() in construct_alloc_key() until an actual key which should be linked into the destination keyring is determined. [jarkko@kernel.org: added a fixes tag and cc to stable] Cc: stable@vger.kernel.org # v5.3+ Fixes: df593ee ("keys: Hoist locking out of __key_link_begin()") Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Reviewed-by: Joey Lee <jlee@suse.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

At btrfs_orphan_cleanup(), if we can't find an inode (btrfs_iget() returns an -ENOENT error pointer), we proceed with 'ret' set to -ENOENT and the inode pointer set to ERR_PTR(-ENOENT). Later when we proceed to the body of the following if statement: if (ret == -ENOENT || inode->i_nlink) { (...) trans = btrfs_start_transaction(root, 1); if (IS_ERR(trans)) { ret = PTR_ERR(trans); iput(inode); goto out; } (...) ret = btrfs_del_orphan_item(trans, root, found_key.objectid); btrfs_end_transaction(trans); if (ret) { iput(inode); goto out; } continue; } If we get an error from btrfs_start_transaction() or from the call to btrfs_del_orphan_item() we end calling iput() against an inode pointer that has a value of ERR_PTR(-ENOENT), resulting in a crash with the following trace: [876.667] BUG: kernel NULL pointer dereference, address: 0000000000000096 [876.667] #PF: supervisor read access in kernel mode [876.667] #PF: error_code(0x0000) - not-present page [876.667] PGD 0 P4D 0 [876.668] Oops: 0000 [#1] PREEMPT SMP PTI [876.668] CPU: 0 PID: 2356187 Comm: mount Tainted: G W 6.4.0-rc6-btrfs-next-134+ #1 [876.668] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [876.668] RIP: 0010:iput+0xa/0x20 [876.668] Code: ff ff ff 66 (...) [876.669] RSP: 0018:ffffafa9c0c9f9d0 EFLAGS: 00010282 [876.669] RAX: ffffffffffffffe4 RBX: 000000000009453b RCX: 0000000000000000 [876.669] RDX: 0000000000000001 RSI: ffffafa9c0c9f930 RDI: fffffffffffffffe [876.669] RBP: ffff95c612f3b800 R08: 0000000000000001 R09: ffffffffffffffe4 [876.670] R10: 00018f2a71010000 R11: 000000000ead96e3 R12: ffff95cb7d6909a0 [876.670] R13: fffffffffffffffe R14: ffff95c60f477000 R15: 00000000ffffffe4 [876.670] FS: 00007f5fbe30a840(0000) GS:ffff95ccdfa00000(0000) knlGS:0000000000000000 [876.670] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [876.671] CR2: 0000000000000096 CR3: 000000055e9f6004 CR4: 0000000000370ef0 [876.671] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [876.671] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [876.672] Call Trace: [876.744] <TASK> [876.744] ? __die_body+0x1b/0x60 [876.744] ? page_fault_oops+0x15d/0x450 [876.745] ? __kmem_cache_alloc_node+0x47/0x410 [876.745] ? do_user_addr_fault+0x65/0x8a0 [876.745] ? exc_page_fault+0x74/0x170 [876.746] ? asm_exc_page_fault+0x22/0x30 [876.746] ? iput+0xa/0x20 [876.746] btrfs_orphan_cleanup+0x221/0x330 [btrfs] [876.746] btrfs_lookup_dentry+0x58f/0x5f0 [btrfs] [876.747] btrfs_lookup+0xe/0x30 [btrfs] [876.747] __lookup_slow+0x82/0x130 [876.785] walk_component+0xe5/0x160 [876.786] path_lookupat.isra.0+0x6e/0x150 [876.786] filename_lookup+0xcf/0x1a0 [876.786] ? mod_objcg_state+0xd2/0x360 [876.786] ? obj_cgroup_charge+0xf5/0x110 [876.787] ? should_failslab+0xa/0x20 [876.787] ? kmem_cache_alloc+0x47/0x450 [876.787] vfs_path_lookup+0x51/0x90 [876.788] mount_subtree+0x8d/0x130 [876.788] btrfs_mount+0x149/0x410 [btrfs] [876.788] ? __kmem_cache_alloc_node+0x47/0x410 [876.788] ? vfs_parse_fs_param+0xc0/0x110 [876.789] legacy_get_tree+0x24/0x50 [876.834] vfs_get_tree+0x22/0xd0 [876.852] path_mount+0x2d8/0x9c0 [876.852] do_mount+0x79/0x90 [876.852] __x64_sys_mount+0x8e/0xd0 [876.853] do_syscall_64+0x38/0x90 [876.899] entry_SYSCALL_64_after_hwframe+0x72/0xdc [876.958] RIP: 0033:0x7f5fbe50b76a [876.959] Code: 48 8b 0d a9 (...) [876.959] RSP: 002b:00007fff01925798 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 [876.959] RAX: ffffffffffffffda RBX: 00007f5fbe694264 RCX: 00007f5fbe50b76a [876.960] RDX: 0000561bde6c8720 RSI: 0000561bde6bdec0 RDI: 0000561bde6c31a0 [876.960] RBP: 0000561bde6bdc70 R08: 0000000000000000 R09: 0000000000000001 [876.960] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [876.960] R13: 0000561bde6c31a0 R14: 0000561bde6c8720 R15: 0000561bde6bdc70 [876.960] </TASK> So fix this by setting 'inode' to NULL whenever we get an error from btrfs_iget(), and to make the code simpler, stop testing for 'ret' being -ENOENT to check if we have an inode - instead test for 'inode' being NULL or not. Having a NULL 'inode' prevents any iput() call from crashing, as iput() ignores NULL inode pointers. Also, stop testing for a NULL return value from btrfs_iget() with PTR_ERR_OR_ZERO(), because btrfs_iget() never returns NULL - in case an inode is not found, it returns ERR_PTR(-ENOENT), and in case of memory allocation failure, it returns ERR_PTR(-ENOMEM). We also don't need the extra iput() calls on the error branches for the btrfs_start_transaction() and btrfs_del_orphan_item() calls, as we have already called iput() before, so remove them. Fixes: a13bb2c ("btrfs: add missing iputs on orphan cleanup failure") CC: stable@vger.kernel.org # 6.4 Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

While trying to get the subpage blocksize tests running, I hit the following panic on generic/476 assertion failed: PagePrivate(page) && page->private, in fs/btrfs/subpage.c:229 kernel BUG at fs/btrfs/subpage.c:229! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 1 PID: 1453 Comm: fsstress Not tainted 6.4.0-rc7+ torvalds#12 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20230301gitf80f052277c8-26.fc38 03/01/2023 pstate: 6140000 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : btrfs_subpage_assert+0xbc/0xf0 lr : btrfs_subpage_assert+0xbc/0xf0 Call trace: btrfs_subpage_assert+0xbc/0xf0 btrfs_subpage_clear_checked+0x38/0xc0 btrfs_page_clear_checked+0x48/0x98 btrfs_truncate_block+0x5d0/0x6a8 btrfs_cont_expand+0x5c/0x528 btrfs_write_check.isra.0+0xf8/0x150 btrfs_buffered_write+0xb4/0x760 btrfs_do_write_iter+0x2f8/0x4b0 btrfs_file_write_iter+0x1c/0x30 do_iter_readv_writev+0xc8/0x158 do_iter_write+0x9c/0x210 vfs_iter_write+0x24/0x40 iter_file_splice_write+0x224/0x390 direct_splice_actor+0x38/0x68 splice_direct_to_actor+0x12c/0x260 do_splice_direct+0x90/0xe8 generic_copy_file_range+0x50/0x90 vfs_copy_file_range+0x29c/0x470 __arm64_sys_copy_file_range+0xcc/0x498 invoke_syscall.constprop.0+0x80/0xd8 do_el0_svc+0x6c/0x168 el0_svc+0x50/0x1b0 el0t_64_sync_handler+0x114/0x120 el0t_64_sync+0x194/0x198 This happens because during btrfs_cont_expand we'll get a page, set it as mapped, and if it's not Uptodate we'll read it. However between the read and re-locking the page we could have called release_folio() on the page, but left the page in the file mapping. release_folio() can clear the page private, and thus further down we blow up when we go to modify the subpage bits. Fix this by putting the set_page_extent_mapped() after the read. This is safe because read_folio() will call set_page_extent_mapped() before it does the read, and then if we clear page private but leave it on the mapping we're completely safe re-setting set_page_extent_mapped(). With this patch I can now run generic/476 without panicing. CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>

…r abort If we have a transaction abort with qgroups enabled we get a warning triggered when doing the final put on the transaction, like this: [552.6789] ------------[ cut here ]------------ [552.6815] WARNING: CPU: 4 PID: 81745 at fs/btrfs/transaction.c:144 btrfs_put_transaction+0x123/0x130 [btrfs] [552.6817] Modules linked in: btrfs blake2b_generic xor (...) [552.6819] CPU: 4 PID: 81745 Comm: btrfs-transacti Tainted: G W 6.4.0-rc6-btrfs-next-134+ #1 [552.6819] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [552.6819] RIP: 0010:btrfs_put_transaction+0x123/0x130 [btrfs] [552.6821] Code: bd a0 01 00 (...) [552.6821] RSP: 0018:ffffa168c0527e28 EFLAGS: 00010286 [552.6821] RAX: ffff936042caed00 RBX: ffff93604a3eb448 RCX: 0000000000000000 [552.6821] RDX: ffff93606421b028 RSI: ffffffff92ff0878 RDI: ffff93606421b010 [552.6821] RBP: ffff93606421b000 R08: 0000000000000000 R09: ffffa168c0d07c20 [552.6821] R10: 0000000000000000 R11: ffff93608dc52950 R12: ffffa168c0527e70 [552.6821] R13: ffff93606421b000 R14: ffff93604a3eb420 R15: ffff93606421b028 [552.6821] FS: 0000000000000000(0000) GS:ffff93675fb00000(0000) knlGS:0000000000000000 [552.6821] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [552.6821] CR2: 0000558ad262b000 CR3: 000000014feda005 CR4: 0000000000370ee0 [552.6822] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [552.6822] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [552.6822] Call Trace: [552.6822] <TASK> [552.6822] ? __warn+0x80/0x130 [552.6822] ? btrfs_put_transaction+0x123/0x130 [btrfs] [552.6824] ? report_bug+0x1f4/0x200 [552.6824] ? handle_bug+0x42/0x70 [552.6824] ? exc_invalid_op+0x14/0x70 [552.6824] ? asm_exc_invalid_op+0x16/0x20 [552.6824] ? btrfs_put_transaction+0x123/0x130 [btrfs] [552.6826] btrfs_cleanup_transaction+0xe7/0x5e0 [btrfs] [552.6828] ? _raw_spin_unlock_irqrestore+0x23/0x40 [552.6828] ? try_to_wake_up+0x94/0x5e0 [552.6828] ? __pfx_process_timeout+0x10/0x10 [552.6828] transaction_kthread+0x103/0x1d0 [btrfs] [552.6830] ? __pfx_transaction_kthread+0x10/0x10 [btrfs] [552.6832] kthread+0xee/0x120 [552.6832] ? __pfx_kthread+0x10/0x10 [552.6832] ret_from_fork+0x29/0x50 [552.6832] </TASK> [552.6832] ---[ end trace 0000000000000000 ]--- This corresponds to this line of code: void btrfs_put_transaction(struct btrfs_transaction *transaction) { (...) WARN_ON(!RB_EMPTY_ROOT( &transaction->delayed_refs.dirty_extent_root)); (...) } The warning happens because btrfs_qgroup_destroy_extent_records(), called in the transaction abort path, we free all entries from the rbtree "dirty_extent_root" with rbtree_postorder_for_each_entry_safe(), but we don't actually empty the rbtree - it's still pointing to nodes that were freed. So set the rbtree's root node to NULL to avoid this warning (assign RB_ROOT). Fixes: 81f7eb0 ("btrfs: destroy qgroup extent records on transaction abort") CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

Cited commit converted the neighbour code to use the standard RCU variant instead of the RCU-bh variant, but the VRF code still uses rcu_read_lock_bh() / rcu_read_unlock_bh() around the neighbour lookup code in its IPv4 and IPv6 output paths, resulting in lockdep splats [1][2]. Can be reproduced using [3]. Fix by switching to rcu_read_lock() / rcu_read_unlock(). [1] ============================= WARNING: suspicious RCU usage 6.5.0-rc1-custom-g9c099e6dbf98 torvalds#403 Not tainted ----------------------------- include/net/neighbour.h:302 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by ping/183: #0: ffff888105ea1d80 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0xc6c/0x33c0 #1: ffffffff85b46820 (rcu_read_lock_bh){....}-{1:2}, at: vrf_output+0x2e3/0x2030 stack backtrace: CPU: 0 PID: 183 Comm: ping Not tainted 6.5.0-rc1-custom-g9c099e6dbf98 torvalds#403 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xc1/0xf0 lockdep_rcu_suspicious+0x211/0x3b0 vrf_output+0x1380/0x2030 ip_push_pending_frames+0x125/0x2a0 raw_sendmsg+0x200d/0x33c0 inet_sendmsg+0xa2/0xe0 __sys_sendto+0x2aa/0x420 __x64_sys_sendto+0xe5/0x1c0 do_syscall_64+0x38/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd [2] ============================= WARNING: suspicious RCU usage 6.5.0-rc1-custom-g9c099e6dbf98 torvalds#403 Not tainted ----------------------------- include/net/neighbour.h:302 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by ping6/182: #0: ffff888114b63000 (sk_lock-AF_INET6){+.+.}-{0:0}, at: rawv6_sendmsg+0x1602/0x3e50 #1: ffffffff85b46820 (rcu_read_lock_bh){....}-{1:2}, at: vrf_output6+0xe9/0x1310 stack backtrace: CPU: 0 PID: 182 Comm: ping6 Not tainted 6.5.0-rc1-custom-g9c099e6dbf98 torvalds#403 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xc1/0xf0 lockdep_rcu_suspicious+0x211/0x3b0 vrf_output6+0xd32/0x1310 ip6_local_out+0xb4/0x1a0 ip6_send_skb+0xbc/0x340 ip6_push_pending_frames+0xe5/0x110 rawv6_sendmsg+0x2e6e/0x3e50 inet_sendmsg+0xa2/0xe0 __sys_sendto+0x2aa/0x420 __x64_sys_sendto+0xe5/0x1c0 do_syscall_64+0x38/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd [3] #!/bin/bash ip link add name vrf-red up numtxqueues 2 type vrf table 10 ip link add name swp1 up master vrf-red type dummy ip address add 192.0.2.1/24 dev swp1 ip address add 2001:db8:1::1/64 dev swp1 ip neigh add 192.0.2.2 lladdr 00:11:22:33:44:55 nud perm dev swp1 ip neigh add 2001:db8:1::2 lladdr 00:11:22:33:44:55 nud perm dev swp1 ip vrf exec vrf-red ping 192.0.2.2 -c 1 &> /dev/null ip vrf exec vrf-red ping6 2001:db8:1::2 -c 1 &> /dev/null Fixes: 09eed11 ("neighbour: switch to standard rcu, instead of rcu_bh") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Link: https://lore.kernel.org/netdev/CA+G9fYtEr-=GbcXNDYo3XOkwR+uYgehVoDjsP0pFLUpZ_AZcyg@mail.gmail.com/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230715153605.4068066-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Can be called via nft set element list iteration, which may acquire rcu and/or bh read lock (depends on set type). BUG: sleeping function called from invalid context at net/netfilter/nf_tables_api.c:3353 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 1232, name: nft preempt_count: 0, expected: 0 RCU nest depth: 1, expected: 0 2 locks held by nft/1232: #0: ffff8881180e3ea8 (&nft_net->commit_mutex){+.+.}-{3:3}, at: nf_tables_valid_genid #1: ffffffff83f5f540 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire Call Trace: nft_chain_validate nft_lookup_validate_setelem nft_pipapo_walk nft_lookup_validate nft_chain_validate nft_immediate_validate nft_chain_validate nf_tables_validate nf_tables_abort No choice but to move it to nf_tables_validate(). Fixes: 81ea010 ("netfilter: nf_tables: add rescheduling points during loop detection walks") Signed-off-by: Florian Westphal <fw@strlen.de>

syzbot complained about a lockdep issue [1] Since raw_bind() and raw_setsockopt() first get RTNL before locking the socket, we must adopt the same order in raw_release() [1] WARNING: possible circular locking dependency detected 6.5.0-rc1-syzkaller-00192-g78adb4bcf99e #0 Not tainted ------------------------------------------------------ syz-executor.0/14110 is trying to acquire lock: ffff88804e4b6130 (sk_lock-AF_CAN){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1708 [inline] ffff88804e4b6130 (sk_lock-AF_CAN){+.+.}-{0:0}, at: raw_bind+0xb1/0xab0 net/can/raw.c:435 but task is already holding lock: ffffffff8e3df368 (rtnl_mutex){+.+.}-{3:3}, at: raw_bind+0xa7/0xab0 net/can/raw.c:434 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (rtnl_mutex){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:603 [inline] __mutex_lock+0x181/0x1340 kernel/locking/mutex.c:747 raw_release+0x1c6/0x9b0 net/can/raw.c:391 __sock_release+0xcd/0x290 net/socket.c:654 sock_close+0x1c/0x20 net/socket.c:1386 __fput+0x3fd/0xac0 fs/file_table.c:384 task_work_run+0x14d/0x240 kernel/task_work.c:179 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0x210/0x240 kernel/entry/common.c:204 __syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline] syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:297 do_syscall_64+0x44/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x63/0xcd -> #0 (sk_lock-AF_CAN){+.+.}-{0:0}: check_prev_add kernel/locking/lockdep.c:3142 [inline] check_prevs_add kernel/locking/lockdep.c:3261 [inline] validate_chain kernel/locking/lockdep.c:3876 [inline] __lock_acquire+0x2e3d/0x5de0 kernel/locking/lockdep.c:5144 lock_acquire kernel/locking/lockdep.c:5761 [inline] lock_acquire+0x1ae/0x510 kernel/locking/lockdep.c:5726 lock_sock_nested+0x3a/0xf0 net/core/sock.c:3492 lock_sock include/net/sock.h:1708 [inline] raw_bind+0xb1/0xab0 net/can/raw.c:435 __sys_bind+0x1ec/0x220 net/socket.c:1792 __do_sys_bind net/socket.c:1803 [inline] __se_sys_bind net/socket.c:1801 [inline] __x64_sys_bind+0x72/0xb0 net/socket.c:1801 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock(sk_lock-AF_CAN); lock(rtnl_mutex); lock(sk_lock-AF_CAN); *** DEADLOCK *** 1 lock held by syz-executor.0/14110: stack backtrace: CPU: 0 PID: 14110 Comm: syz-executor.0 Not tainted 6.5.0-rc1-syzkaller-00192-g78adb4bcf99e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106 check_noncircular+0x311/0x3f0 kernel/locking/lockdep.c:2195 check_prev_add kernel/locking/lockdep.c:3142 [inline] check_prevs_add kernel/locking/lockdep.c:3261 [inline] validate_chain kernel/locking/lockdep.c:3876 [inline] __lock_acquire+0x2e3d/0x5de0 kernel/locking/lockdep.c:5144 lock_acquire kernel/locking/lockdep.c:5761 [inline] lock_acquire+0x1ae/0x510 kernel/locking/lockdep.c:5726 lock_sock_nested+0x3a/0xf0 net/core/sock.c:3492 lock_sock include/net/sock.h:1708 [inline] raw_bind+0xb1/0xab0 net/can/raw.c:435 __sys_bind+0x1ec/0x220 net/socket.c:1792 __do_sys_bind net/socket.c:1803 [inline] __se_sys_bind net/socket.c:1801 [inline] __x64_sys_bind+0x72/0xb0 net/socket.c:1801 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fd89007cb29 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fd890d2a0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000031 RAX: ffffffffffffffda RBX: 00007fd89019bf80 RCX: 00007fd89007cb29 RDX: 0000000000000010 RSI: 0000000020000040 RDI: 0000000000000003 RBP: 00007fd8900c847a R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007fd89019bf80 R15: 00007ffebf8124f8 </TASK> Fixes: ee8b94c ("can: raw: fix receiver memory leak") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ziyang Xuan <william.xuanziyang@huawei.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: stable@vger.kernel.org Cc: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/all/20230720114438.172434-1-edumazet@google.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Skip bound chain when flushing table rules, the rule that owns this chain releases these objects. Otherwise, the following warning is triggered: WARNING: CPU: 2 PID: 1217 at net/netfilter/nf_tables_api.c:2013 nf_tables_chain_destroy+0x1f7/0x210 [nf_tables] CPU: 2 PID: 1217 Comm: chain-flush Not tainted 6.1.39 #1 RIP: 0010:nf_tables_chain_destroy+0x1f7/0x210 [nf_tables] Fixes: d0e2c7d ("netfilter: nf_tables: add NFT_CHAIN_BINDING") Reported-by: Kevin Rich <kevinrich1337@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Florian Westphal <fw@strlen.de>

In hci_cs_disconnect, we do hci_conn_del even if disconnection failed. ISO, L2CAP and SCO connections refer to the hci_conn without hci_conn_get, so disconn_cfm must be called so they can clean up their conn, otherwise use-after-free occurs. ISO: ========================================================== iso_sock_connect:880: sk 00000000eabd6557 iso_connect_cis:356: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da ... iso_conn_add:140: hcon 000000001696f1fd conn 00000000b6251073 hci_dev_put:1487: hci0 orig refcnt 17 __iso_chan_add:214: conn 00000000b6251073 iso_sock_clear_timer:117: sock 00000000eabd6557 state 3 ... hci_rx_work:4085: hci0 Event packet hci_event_packet:7601: hci0: event 0x0f hci_cmd_status_evt:4346: hci0: opcode 0x0406 hci_cs_disconnect:2760: hci0: status 0x0c hci_sent_cmd_data:3107: hci0 opcode 0x0406 hci_conn_del:1151: hci0 hcon 000000001696f1fd handle 2560 hci_conn_unlink:1102: hci0: hcon 000000001696f1fd hci_conn_drop:1451: hcon 00000000d8521aaf orig refcnt 2 hci_chan_list_flush:2780: hcon 000000001696f1fd hci_dev_put:1487: hci0 orig refcnt 21 hci_dev_put:1487: hci0 orig refcnt 20 hci_req_cmd_complete:3978: opcode 0x0406 status 0x0c ... <no iso_* activity on sk/conn> ... iso_sock_sendmsg:1098: sock 00000000dea5e2e0, sk 00000000eabd6557 BUG: kernel NULL pointer dereference, address: 0000000000000668 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 RIP: 0010:iso_sock_sendmsg (net/bluetooth/iso.c:1112) bluetooth ========================================================== L2CAP: ================================================================== hci_cmd_status_evt:4359: hci0: opcode 0x0406 hci_cs_disconnect:2760: hci0: status 0x0c hci_sent_cmd_data:3085: hci0 opcode 0x0406 hci_conn_del:1151: hci0 hcon ffff88800c999000 handle 3585 hci_conn_unlink:1102: hci0: hcon ffff88800c999000 hci_chan_list_flush:2780: hcon ffff88800c999000 hci_chan_del:2761: hci0 hcon ffff88800c999000 chan ffff888018ddd280 ... BUG: KASAN: slab-use-after-free in hci_send_acl+0x2d/0x540 [bluetooth] Read of size 8 at addr ffff888018ddd298 by task bluetoothd/1175 CPU: 0 PID: 1175 Comm: bluetoothd Tainted: G E 6.4.0-rc4+ AMDESE#2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x5b/0x90 print_report+0xcf/0x670 ? __virt_addr_valid+0xf8/0x180 ? hci_send_acl+0x2d/0x540 [bluetooth] kasan_report+0xa8/0xe0 ? hci_send_acl+0x2d/0x540 [bluetooth] hci_send_acl+0x2d/0x540 [bluetooth] ? __pfx___lock_acquire+0x10/0x10 l2cap_chan_send+0x1fd/0x1300 [bluetooth] ? l2cap_sock_sendmsg+0xf2/0x170 [bluetooth] ? __pfx_l2cap_chan_send+0x10/0x10 [bluetooth] ? lock_release+0x1d5/0x3c0 ? mark_held_locks+0x1a/0x90 l2cap_sock_sendmsg+0x100/0x170 [bluetooth] sock_write_iter+0x275/0x280 ? __pfx_sock_write_iter+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 do_iter_readv_writev+0x176/0x220 ? __pfx_do_iter_readv_writev+0x10/0x10 ? find_held_lock+0x83/0xa0 ? selinux_file_permission+0x13e/0x210 do_iter_write+0xda/0x340 vfs_writev+0x1b4/0x400 ? __pfx_vfs_writev+0x10/0x10 ? __seccomp_filter+0x112/0x750 ? populate_seccomp_data+0x182/0x220 ? __fget_light+0xdf/0x100 ? do_writev+0x19d/0x210 do_writev+0x19d/0x210 ? __pfx_do_writev+0x10/0x10 ? mark_held_locks+0x1a/0x90 do_syscall_64+0x60/0x90 ? lockdep_hardirqs_on_prepare+0x149/0x210 ? do_syscall_64+0x6c/0x90 ? lockdep_hardirqs_on_prepare+0x149/0x210 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7ff45cb23e64 Code: 15 d1 1f 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 80 3d 9d a7 0d 00 00 74 13 b8 14 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89 RSP: 002b:00007fff21ae09b8 EFLAGS: 00000202 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007ff45cb23e64 RDX: 0000000000000001 RSI: 00007fff21ae0aa0 RDI: 0000000000000017 RBP: 00007fff21ae0aa0 R08: 000000000095a8a0 R09: 0000607000053f40 R10: 0000000000000001 R11: 0000000000000202 R12: 00007fff21ae0ac0 R13: 00000fffe435c150 R14: 00007fff21ae0a80 R15: 000060f000000040 </TASK> Allocated by task 771: kasan_save_stack+0x33/0x60 kasan_set_track+0x25/0x30 __kasan_kmalloc+0xaa/0xb0 hci_chan_create+0x67/0x1b0 [bluetooth] l2cap_conn_add.part.0+0x17/0x590 [bluetooth] l2cap_connect_cfm+0x266/0x6b0 [bluetooth] hci_le_remote_feat_complete_evt+0x167/0x310 [bluetooth] hci_event_packet+0x38d/0x800 [bluetooth] hci_rx_work+0x287/0xb20 [bluetooth] process_one_work+0x4f7/0x970 worker_thread+0x8f/0x620 kthread+0x17f/0x1c0 ret_from_fork+0x2c/0x50 Freed by task 771: kasan_save_stack+0x33/0x60 kasan_set_track+0x25/0x30 kasan_save_free_info+0x2e/0x50 ____kasan_slab_free+0x169/0x1c0 slab_free_freelist_hook+0x9e/0x1c0 __kmem_cache_free+0xc0/0x310 hci_chan_list_flush+0x46/0x90 [bluetooth] hci_conn_cleanup+0x7d/0x330 [bluetooth] hci_cs_disconnect+0x35d/0x530 [bluetooth] hci_cmd_status_evt+0xef/0x2b0 [bluetooth] hci_event_packet+0x38d/0x800 [bluetooth] hci_rx_work+0x287/0xb20 [bluetooth] process_one_work+0x4f7/0x970 worker_thread+0x8f/0x620 kthread+0x17f/0x1c0 ret_from_fork+0x2c/0x50 ================================================================== Fixes: b8d2905 ("Bluetooth: clean up connection in hci_cs_disconnect") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

sk->sk_state indicates whether iso_pi(sk)->conn is valid. Operations that check/update sk_state and access conn should hold lock_sock, otherwise they can race. The order of taking locks is hci_dev_lock > lock_sock > iso_conn_lock, which is how it is in connect/disconnect_cfm -> iso_conn_del -> iso_chan_del. Fix locking in iso_connect_cis/bis and sendmsg/recvmsg to take lock_sock around updating sk_state and conn. iso_conn_del must not occur during iso_connect_cis/bis, as it frees the iso_conn. Hold hdev->lock longer to prevent that. This should not reintroduce the issue fixed in commit 241f519 ("Bluetooth: ISO: Avoid circular locking dependency"), since the we acquire locks in order. We retain the fix in iso_sock_connect to release lock_sock before iso_connect_* acquires hdev->lock. Similarly for commit 6a5ad25 ("Bluetooth: ISO: Fix possible circular locking dependency"). We retain the fix in iso_conn_ready to not acquire iso_conn_lock before lock_sock. iso_conn_add shall return iso_conn with valid hcon. Make it so also when reusing an old CIS connection waiting for disconnect timeout (see __iso_sock_close where conn->hcon is set to NULL). Trace with iso_conn_del after iso_chan_add in iso_connect_cis: =============================================================== iso_sock_create:771: sock 00000000be9b69b7 iso_sock_init:693: sk 000000004dff667e iso_sock_bind:827: sk 000000004dff667e 70:1a:b8:98:ff:a2 type 1 iso_sock_setsockopt:1289: sk 000000004dff667e iso_sock_setsockopt:1289: sk 000000004dff667e iso_sock_setsockopt:1289: sk 000000004dff667e iso_sock_connect:875: sk 000000004dff667e iso_connect_cis:353: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da hci_get_route:1199: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da hci_conn_add:1005: hci0 dst 28:3d:c2:4a:7e:da iso_conn_add:140: hcon 000000007b65d182 conn 00000000daf8625e __iso_chan_add:214: conn 00000000daf8625e iso_connect_cfm:1700: hcon 000000007b65d182 bdaddr 28:3d:c2:4a:7e:da status 12 iso_conn_del:187: hcon 000000007b65d182 conn 00000000daf8625e, err 16 iso_sock_clear_timer:117: sock 000000004dff667e state 3 <Note: sk_state is BT_BOUND (3), so iso_connect_cis is still running at this point> iso_chan_del:153: sk 000000004dff667e, conn 00000000daf8625e, err 16 hci_conn_del:1151: hci0 hcon 000000007b65d182 handle 65535 hci_conn_unlink:1102: hci0: hcon 000000007b65d182 hci_chan_list_flush:2780: hcon 000000007b65d182 iso_sock_getsockopt:1376: sk 000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e iso_sock_getsockopt:1376: sk 000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e iso_sock_shutdown:1434: sock 00000000be9b69b7, sk 000000004dff667e, how 1 __iso_sock_close:632: sk 000000004dff667e state 5 socket 00000000be9b69b7 <Note: sk_state is BT_CONNECT (5), even though iso_chan_del sets BT_CLOSED (6). Only iso_connect_cis sets it to BT_CONNECT, so it must be that iso_chan_del occurred between iso_chan_add and end of iso_connect_cis.> BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 8000000006467067 P4D 8000000006467067 PUD 3f5f067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 RIP: 0010:__iso_sock_close (net/bluetooth/iso.c:664) bluetooth =============================================================== Trace with iso_conn_del before iso_chan_add in iso_connect_cis: =============================================================== iso_connect_cis:356: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da ... iso_conn_add:140: hcon 0000000093bc551f conn 00000000768ae504 hci_dev_put:1487: hci0 orig refcnt 21 hci_event_packet:7607: hci0: event 0x0e hci_cmd_complete_evt:4231: hci0: opcode 0x2062 hci_cc_le_set_cig_params:3846: hci0: status 0x07 hci_sent_cmd_data:3107: hci0 opcode 0x2062 iso_connect_cfm:1703: hcon 0000000093bc551f bdaddr 28:3d:c2:4a:7e:da status 7 iso_conn_del:187: hcon 0000000093bc551f conn 00000000768ae504, err 12 hci_conn_del:1151: hci0 hcon 0000000093bc551f handle 65535 hci_conn_unlink:1102: hci0: hcon 0000000093bc551f hci_chan_list_flush:2780: hcon 0000000093bc551f __iso_chan_add:214: conn 00000000768ae504 <Note: this conn was already freed in iso_conn_del above> iso_sock_clear_timer:117: sock 0000000098323f95 state 3 general protection fault, probably for non-canonical address 0x30b29c630930aec8: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 1920 Comm: bluetoothd Tainted: G E 6.3.0-rc7+ AMDESE#4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 RIP: 0010:detach_if_pending+0x28/0xd0 Code: 90 90 0f 1f 44 00 00 48 8b 47 08 48 85 c0 0f 84 ad 00 00 00 55 89 d5 53 48 83 3f 00 48 89 fb 74 7d 66 90 48 8b 03 48 8b 53 08 <> RSP: 0018:ffffb90841a67d08 EFLAGS: 00010007 RAX: 0000000000000000 RBX: ffff9141bd5061b8 RCX: 0000000000000000 RDX: 30b29c630930aec8 RSI: ffff9141fdd21e80 RDI: ffff9141bd5061b8 RBP: 0000000000000001 R08: 0000000000000000 R09: ffffb90841a67b88 R10: 0000000000000003 R11: ffffffff8613f558 R12: ffff9141fdd21e80 R13: 0000000000000000 R14: ffff9141b5976010 R15: ffff914185755338 FS: 00007f45768bd840(0000) GS:ffff9141fdd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000619000424074 CR3: 0000000009f5e005 CR4: 0000000000170ee0 Call Trace: <TASK> timer_delete+0x48/0x80 try_to_grab_pending+0xdf/0x170 __cancel_work+0x37/0xb0 iso_connect_cis+0x141/0x400 [bluetooth] =============================================================== Trace with NULL conn->hcon in state BT_CONNECT: =============================================================== __iso_sock_close:619: sk 00000000f7c71fc5 state 1 socket 00000000d90c5fe5 ... __iso_sock_close:619: sk 00000000f7c71fc5 state 8 socket 00000000d90c5fe5 iso_chan_del:153: sk 00000000f7c71fc5, conn 0000000022c03a7e, err 104 ... iso_sock_connect:862: sk 00000000129b56c3 iso_connect_cis:348: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7d:2a hci_get_route:1199: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7d:2a hci_dev_hold:1495: hci0 orig refcnt 19 __iso_chan_add:214: conn 0000000022c03a7e <Note: reusing old conn> iso_sock_clear_timer:117: sock 00000000129b56c3 state 3 ... iso_sock_ready:1485: sk 00000000129b56c3 ... iso_sock_sendmsg:1077: sock 00000000e5013966, sk 00000000129b56c3 BUG: kernel NULL pointer dereference, address: 00000000000006a8 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 1403 Comm: wireplumber Tainted: G E 6.3.0-rc7+ AMDESE#4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 RIP: 0010:iso_sock_sendmsg+0x63/0x2a0 [bluetooth] =============================================================== Fixes: 241f519 ("Bluetooth: ISO: Avoid circular locking dependency") Fixes: 6a5ad25 ("Bluetooth: ISO: Fix possible circular locking dependency") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

When ring_buffer_swap_cpu was called during resize process, the cpu buffer was swapped in the middle, resulting in incorrect state. Continuing to run in the wrong state will result in oops. This issue can be easily reproduced using the following two scripts: /tmp # cat test1.sh //#! /bin/sh for i in `seq 0 100000` do echo 2000 > /sys/kernel/debug/tracing/buffer_size_kb sleep 0.5 echo 5000 > /sys/kernel/debug/tracing/buffer_size_kb sleep 0.5 done /tmp # cat test2.sh //#! /bin/sh for i in `seq 0 100000` do echo irqsoff > /sys/kernel/debug/tracing/current_tracer sleep 1 echo nop > /sys/kernel/debug/tracing/current_tracer sleep 1 done /tmp # ./test1.sh & /tmp # ./test2.sh & A typical oops log is as follows, sometimes with other different oops logs. [ 231.711293] WARNING: CPU: 0 PID: 9 at kernel/trace/ring_buffer.c:2026 rb_update_pages+0x378/0x3f8 [ 231.713375] Modules linked in: [ 231.714735] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.5.0-rc1-00276-g20edcec23f92 torvalds#15 [ 231.716750] Hardware name: linux,dummy-virt (DT) [ 231.718152] Workqueue: events update_pages_handler [ 231.719714] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 231.721171] pc : rb_update_pages+0x378/0x3f8 [ 231.722212] lr : rb_update_pages+0x25c/0x3f8 [ 231.723248] sp : ffff800082b9bd50 [ 231.724169] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 0000000000000000 [ 231.726102] x26: 0000000000000001 x25: fffffffffffff010 x24: 0000000000000ff0 [ 231.728122] x23: ffff0000c3a0b600 x22: ffff0000c3a0b5c0 x21: fffffffffffffe0a [ 231.730203] x20: ffff0000c3a0b600 x19: ffff0000c0102400 x18: 0000000000000000 [ 231.732329] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffe7aa8510 [ 231.734212] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000002 [ 231.736291] x11: ffff8000826998a8 x10: ffff800082b9baf0 x9 : ffff800081137558 [ 231.738195] x8 : fffffc00030e82c8 x7 : 0000000000000000 x6 : 0000000000000001 [ 231.740192] x5 : ffff0000ffbafe00 x4 : 0000000000000000 x3 : 0000000000000000 [ 231.742118] x2 : 00000000000006aa x1 : 0000000000000001 x0 : ffff0000c0007208 [ 231.744196] Call trace: [ 231.744892] rb_update_pages+0x378/0x3f8 [ 231.745893] update_pages_handler+0x1c/0x38 [ 231.746893] process_one_work+0x1f0/0x468 [ 231.747852] worker_thread+0x54/0x410 [ 231.748737] kthread+0x124/0x138 [ 231.749549] ret_from_fork+0x10/0x20 [ 231.750434] ---[ end trace 0000000000000000 ]--- [ 233.720486] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 233.721696] Mem abort info: [ 233.721935] ESR = 0x0000000096000004 [ 233.722283] EC = 0x25: DABT (current EL), IL = 32 bits [ 233.722596] SET = 0, FnV = 0 [ 233.722805] EA = 0, S1PTW = 0 [ 233.723026] FSC = 0x04: level 0 translation fault [ 233.723458] Data abort info: [ 233.723734] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 233.724176] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 233.724589] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 233.725075] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000104943000 [ 233.725592] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [ 233.726231] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 233.726720] Modules linked in: [ 233.727007] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.5.0-rc1-00276-g20edcec23f92 torvalds#15 [ 233.727777] Hardware name: linux,dummy-virt (DT) [ 233.728225] Workqueue: events update_pages_handler [ 233.728655] pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 233.729054] pc : rb_update_pages+0x1a8/0x3f8 [ 233.729334] lr : rb_update_pages+0x154/0x3f8 [ 233.729592] sp : ffff800082b9bd50 [ 233.729792] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 0000000000000000 [ 233.730220] x26: 0000000000000000 x25: ffff800082a8b840 x24: ffff0000c0102418 [ 233.730653] x23: 0000000000000000 x22: fffffc000304c880 x21: 0000000000000003 [ 233.731105] x20: 00000000000001f4 x19: ffff0000c0102400 x18: ffff800082fcbc58 [ 233.731727] x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000001 [ 233.732282] x14: ffff8000825fe0c8 x13: 0000000000000001 x12: 0000000000000000 [ 233.732709] x11: ffff8000826998a8 x10: 0000000000000ae0 x9 : ffff8000801b760c [ 233.733148] x8 : fefefefefefefeff x7 : 0000000000000018 x6 : ffff0000c03298c0 [ 233.733553] x5 : 0000000000000002 x4 : 0000000000000000 x3 : 0000000000000000 [ 233.733972] x2 : ffff0000c3a0b600 x1 : 0000000000000000 x0 : 0000000000000000 [ 233.734418] Call trace: [ 233.734593] rb_update_pages+0x1a8/0x3f8 [ 233.734853] update_pages_handler+0x1c/0x38 [ 233.735148] process_one_work+0x1f0/0x468 [ 233.735525] worker_thread+0x54/0x410 [ 233.735852] kthread+0x124/0x138 [ 233.736064] ret_from_fork+0x10/0x20 [ 233.736387] Code: 92400000 910006b5 aa000021 aa0303f7 (f9400060) [ 233.736959] ---[ end trace 0000000000000000 ]--- After analysis, the seq of the error is as follows [1-5]: int ring_buffer_resize(struct trace_buffer *buffer, unsigned long size, int cpu_id) { for_each_buffer_cpu(buffer, cpu) { cpu_buffer = buffer->buffers[cpu]; //1. get cpu_buffer, aka cpu_buffer(A) ... ... schedule_work_on(cpu, &cpu_buffer->update_pages_work); //2. 'update_pages_work' is queue on 'cpu', cpu_buffer(A) is passed to // update_pages_handler, do the update process, set 'update_done' in // complete(&cpu_buffer->update_done) and to wakeup resize process. //----> //3. Just at this moment, ring_buffer_swap_cpu is triggered, //cpu_buffer(A) be swaped to cpu_buffer(B), the max_buffer. //ring_buffer_swap_cpu is called as the 'Call trace' below. Call trace: dump_backtrace+0x0/0x2f8 show_stack+0x18/0x28 dump_stack+0x12c/0x188 ring_buffer_swap_cpu+0x2f8/0x328 update_max_tr_single+0x180/0x210 check_critical_timing+0x2b4/0x2c8 tracer_hardirqs_on+0x1c0/0x200 trace_hardirqs_on+0xec/0x378 el0_svc_common+0x64/0x260 do_el0_svc+0x90/0xf8 el0_svc+0x20/0x30 el0_sync_handler+0xb0/0xb8 el0_sync+0x180/0x1c0 //<---- /* wait for all the updates to complete */ for_each_buffer_cpu(buffer, cpu) { cpu_buffer = buffer->buffers[cpu]; //4. get cpu_buffer, cpu_buffer(B) is used in the following process, //the state of cpu_buffer(A) and cpu_buffer(B) is totally wrong. //for example, cpu_buffer(A)->update_done will leave be set 1, and will //not 'wait_for_completion' at the next resize round. if (!cpu_buffer->nr_pages_to_update) continue; if (cpu_online(cpu)) wait_for_completion(&cpu_buffer->update_done); cpu_buffer->nr_pages_to_update = 0; } ... } //5. the state of cpu_buffer(A) and cpu_buffer(B) is totally wrong, //Continuing to run in the wrong state, then oops occurs. Link: https://lore.kernel.org/linux-trace-kernel/202307191558478409990@zte.com.cn Signed-off-by: Chen Lin <chen.lin5@zte.com.cn> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

…kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.5, part #1 - Avoid pKVM finalization if KVM initialization fails - Add missing BTI instructions in the hypervisor, fixing an early boot failure on BTI systems - Handle MMU notifiers correctly for non hugepage-aligned memslots - Work around a bug in the architecture where hypervisor timer controls have UNKNOWN behavior under nested virt. - Disable preemption in kvm_arch_hardware_enable(), fixing a kernel BUG in cpu hotplug resulting from per-CPU accessor sanity checking. - Make WFI emulation on GICv4 systems robust w.r.t. preemption, consistently requesting a doorbell interrupt on vcpu_put() - Uphold RES0 sysreg behavior when emulating older PMU versions - Avoid macro expansion when initializing PMU register names, ensuring the tracepoints pretty-print the sysreg.

On error when building the rule, the immediate expression unbinds the chain, hence objects can be deactivated by the transaction records. Otherwise, it is possible to trigger the following warning: WARNING: CPU: 3 PID: 915 at net/netfilter/nf_tables_api.c:2013 nf_tables_chain_destroy+0x1f7/0x210 [nf_tables] CPU: 3 PID: 915 Comm: chain-bind-err- Not tainted 6.1.39 #1 RIP: 0010:nf_tables_chain_destroy+0x1f7/0x210 [nf_tables] Fixes: 4bedf9e ("netfilter: nf_tables: fix chain binding transaction logic") Reported-by: Kevin Rich <kevinrich1337@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Florian Westphal <fw@strlen.de>

…RULE_CHAIN_ID Bail out with EOPNOTSUPP when adding rule to bound chain via NFTA_RULE_CHAIN_ID. The following warning splat is shown when adding a rule to a deleted bound chain: WARNING: CPU: 2 PID: 13692 at net/netfilter/nf_tables_api.c:2013 nf_tables_chain_destroy+0x1f7/0x210 [nf_tables] CPU: 2 PID: 13692 Comm: chain-bound-rul Not tainted 6.1.39 #1 RIP: 0010:nf_tables_chain_destroy+0x1f7/0x210 [nf_tables] Fixes: d0e2c7d ("netfilter: nf_tables: add NFT_CHAIN_BINDING") Reported-by: Kevin Rich <kevinrich1337@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Florian Westphal <fw@strlen.de>

The cited commit holds encap tbl lock unconditionally when setting up dests. But it may cause the following deadlock: PID: 1063722 TASK: ffffa062ca5d0000 CPU: 13 COMMAND: "handler8" #0 [ffffb14de05b7368] __schedule at ffffffffa1d5aa91 #1 [ffffb14de05b7410] schedule at ffffffffa1d5afdb AMDESE#2 [ffffb14de05b7430] schedule_preempt_disabled at ffffffffa1d5b528 AMDESE#3 [ffffb14de05b7440] __mutex_lock at ffffffffa1d5d6cb AMDESE#4 [ffffb14de05b74e8] mutex_lock_nested at ffffffffa1d5ddeb AMDESE#5 [ffffb14de05b74f8] mlx5e_tc_tun_encap_dests_set at ffffffffc12f2096 [mlx5_core] AMDESE#6 [ffffb14de05b7568] post_process_attr at ffffffffc12d9fc5 [mlx5_core] torvalds#7 [ffffb14de05b75a0] mlx5e_tc_add_fdb_flow at ffffffffc12de877 [mlx5_core] torvalds#8 [ffffb14de05b75f0] __mlx5e_add_fdb_flow at ffffffffc12e0eef [mlx5_core] torvalds#9 [ffffb14de05b7660] mlx5e_tc_add_flow at ffffffffc12e12f7 [mlx5_core] torvalds#10 [ffffb14de05b76b8] mlx5e_configure_flower at ffffffffc12e1686 [mlx5_core] torvalds#11 [ffffb14de05b7720] mlx5e_rep_indr_offload at ffffffffc12e3817 [mlx5_core] torvalds#12 [ffffb14de05b7730] mlx5e_rep_indr_setup_tc_cb at ffffffffc12e388a [mlx5_core] torvalds#13 [ffffb14de05b7740] tc_setup_cb_add at ffffffffa1ab2ba8 torvalds#14 [ffffb14de05b77a0] fl_hw_replace_filter at ffffffffc0bdec2f [cls_flower] torvalds#15 [ffffb14de05b7868] fl_change at ffffffffc0be6caa [cls_flower] torvalds#16 [ffffb14de05b7908] tc_new_tfilter at ffffffffa1ab71f0 [1031218.028143] wait_for_completion+0x24/0x30 [1031218.028589] mlx5e_update_route_decap_flows+0x9a/0x1e0 [mlx5_core] [1031218.029256] mlx5e_tc_fib_event_work+0x1ad/0x300 [mlx5_core] [1031218.029885] process_one_work+0x24e/0x510 Actually no need to hold encap tbl lock if there is no encap action. Fix it by checking if encap action exists or not before holding encap tbl lock. Fixes: 37c3b9f ("net/mlx5e: Prevent encap offload when neigh update is running") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The below crash can be encountered when using xdpsock in rx mode for legacy rq: the buffer gets released in the XDP_REDIRECT path, and then once again in the driver. This fix sets the flag to avoid releasing on the driver side. XSK handling of buffers for legacy rq was relying on the caller to set the skip release flag. But the referenced fix started using fragment counts for pages instead of the skip flag. Crash log: general protection fault, probably for non-canonical address 0xffff8881217e3a: 0000 [#1] SMP CPU: 0 PID: 14 Comm: ksoftirqd/0 Not tainted 6.5.0-rc1+ torvalds#31 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:bpf_prog_03b13f331978c78c+0xf/0x28 Code: ... RSP: 0018:ffff88810082fc98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888138404901 RCX: c0ffffc900027cbc RDX: ffffffffa000b514 RSI: 00ffff8881217e32 RDI: ffff888138404901 RBP: ffff88810082fc98 R08: 0000000000091100 R09: 0000000000000006 R10: 0000000000000800 R11: 0000000000000800 R12: ffffc9000027a000 R13: ffff8881217e2dc0 R14: ffff8881217e2910 R15: ffff8881217e2f00 FS: 0000000000000000(0000) GS:ffff88852c800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000564cb2e2cde0 CR3: 000000010e603004 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? die_addr+0x32/0x80 ? exc_general_protection+0x192/0x390 ? asm_exc_general_protection+0x22/0x30 ? 0xffffffffa000b514 ? bpf_prog_03b13f331978c78c+0xf/0x28 mlx5e_xdp_handle+0x48/0x670 [mlx5_core] ? dev_gro_receive+0x3b5/0x6e0 mlx5e_xsk_skb_from_cqe_linear+0x6e/0x90 [mlx5_core] mlx5e_handle_rx_cqe+0x55/0x100 [mlx5_core] mlx5e_poll_rx_cq+0x87/0x6e0 [mlx5_core] mlx5e_napi_poll+0x45e/0x6b0 [mlx5_core] __napi_poll+0x25/0x1a0 net_rx_action+0x28a/0x300 __do_softirq+0xcd/0x279 ? sort_range+0x20/0x20 run_ksoftirqd+0x1a/0x20 smpboot_thread_fn+0xa2/0x130 kthread+0xc9/0xf0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Modules linked in: mlx5_ib mlx5_core rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter overlay zram zsmalloc fuse [last unloaded: mlx5_core] ---[ end trace 0000000000000000 ]--- Fixes: 7abd955 ("net/mlx5e: RX, Fix page_pool page fragment tracking for XDP") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Add a check to avoid null pointer dereference as below: [ 90.002283] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI [ 90.002292] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 90.002346] ? exc_general_protection+0x159/0x240 [ 90.002352] ? asm_exc_general_protection+0x26/0x30 [ 90.002357] ? ttm_bo_evict_swapout_allowable+0x322/0x5e0 [ttm] [ 90.002365] ? ttm_bo_evict_swapout_allowable+0x42e/0x5e0 [ttm] [ 90.002373] ttm_bo_swapout+0x134/0x7f0 [ttm] [ 90.002383] ? __pfx_ttm_bo_swapout+0x10/0x10 [ttm] [ 90.002391] ? lock_acquire+0x44d/0x4f0 [ 90.002398] ? ttm_device_swapout+0xa5/0x260 [ttm] [ 90.002412] ? lock_acquired+0x355/0xa00 [ 90.002416] ? do_raw_spin_trylock+0xb6/0x190 [ 90.002421] ? __pfx_lock_acquired+0x10/0x10 [ 90.002426] ? ttm_global_swapout+0x25/0x210 [ttm] [ 90.002442] ttm_device_swapout+0x198/0x260 [ttm] [ 90.002456] ? __pfx_ttm_device_swapout+0x10/0x10 [ttm] [ 90.002472] ttm_global_swapout+0x75/0x210 [ttm] [ 90.002486] ttm_tt_populate+0x187/0x3f0 [ttm] [ 90.002501] ttm_bo_handle_move_mem+0x437/0x590 [ttm] [ 90.002517] ttm_bo_validate+0x275/0x430 [ttm] [ 90.002530] ? __pfx_ttm_bo_validate+0x10/0x10 [ttm] [ 90.002544] ? kasan_save_stack+0x33/0x60 [ 90.002550] ? kasan_set_track+0x25/0x30 [ 90.002554] ? __kasan_kmalloc+0x8f/0xa0 [ 90.002558] ? amdgpu_gtt_mgr_new+0x81/0x420 [amdgpu] [ 90.003023] ? ttm_resource_alloc+0xf6/0x220 [ttm] [ 90.003038] amdgpu_bo_pin_restricted+0x2dd/0x8b0 [amdgpu] [ 90.003210] ? __x64_sys_ioctl+0x131/0x1a0 [ 90.003210] ? do_syscall_64+0x60/0x90 Fixes: a2848d0 ("drm/ttm: never consider pinned BOs for eviction&swap") Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20230724024229.1118444-1-guchun.chen@amd.com Signed-off-by: Christian König <christian.koenig@amd.com>

Since commit bb1520d ("s390/mm: start kernel with DAT enabled") the kernel crashes early during boot when debug pagealloc is enabled: mem auto-init: stack:off, heap alloc:off, heap free:off addressing exception: 0005 ilc:2 [#1] SMP DEBUG_PAGEALLOC Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0-rc3-09759-gc5666c912155 torvalds#630 [..] Krnl Code: 00000000001325f6: ec5600248064 cgrj %r5,%r6,8,000000000013263e 00000000001325fc: eb880002000c srlg %r8,%r8,2 #0000000000132602: b2210051 ipte %r5,%r1,%r0,0 >0000000000132606: b90400d1 lgr %r13,%r1 000000000013260a: 41605008 la %r6,8(%r5) 000000000013260e: a7db1000 aghi %r13,4096 0000000000132612: b221006d ipte %r6,%r13,%r0,0 0000000000132616: e3d0d0000171 lay %r13,4096(%r13) Call Trace: __kernel_map_pages+0x14e/0x320 __free_pages_ok+0x23a/0x5a8) free_low_memory_core_early+0x214/0x2c8 memblock_free_all+0x28/0x58 mem_init+0xb6/0x228 mm_core_init+0xb6/0x3b0 start_kernel+0x1d2/0x5a8 startup_continue+0x36/0x40 Kernel panic - not syncing: Fatal exception: panic_on_oops This is caused by using large mappings on machines with EDAT1/EDAT2. Add the code to split the mappings into 4k pages if debug pagealloc is enabled by CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT or the debug_pagealloc kernel command line option. Fixes: bb1520d ("s390/mm: start kernel with DAT enabled") Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

Even though the test suite covers this it somehow became obscured that this wasn't working. The test iommufd_ioas.mock_domain.access_domain_destory would blow up rarely. end should be set to 1 because this just pushed an item, the carry, to the pfns list. Sometimes the test would blow up with: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 5 PID: 584 Comm: iommufd Not tainted 6.5.0-rc1-dirty torvalds#1236 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:batch_unpin+0xa2/0x100 [iommufd] Code: 17 48 81 fe ff ff 07 00 77 70 48 8b 15 b7 be 97 e2 48 85 d2 74 14 48 8b 14 fa 48 85 d2 74 0b 40 0f b6 f6 48 c1 e6 04 48 01 f2 <48> 8b 3a 48 c1 e0 06 89 ca 48 89 de 48 83 e7 f0 48 01 c7 e8 96 dc RSP: 0018:ffffc90001677a58 EFLAGS: 00010246 RAX: 00007f7e2646f000 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 00000000fefc4c8d RDI: 0000000000fefc4c RBP: ffffc90001677a80 R08: 0000000000000048 R09: 0000000000000200 R10: 0000000000030b98 R11: ffffffff81f3bb40 R12: 0000000000000001 R13: ffff888101f75800 R14: ffffc90001677ad0 R15: 00000000000001fe FS: 00007f9323679740(0000) GS:ffff8881ba540000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000105ede003 CR4: 00000000003706a0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? show_regs+0x5c/0x70 ? __die+0x1f/0x60 ? page_fault_oops+0x15d/0x440 ? lock_release+0xbc/0x240 ? exc_page_fault+0x4a4/0x970 ? asm_exc_page_fault+0x27/0x30 ? batch_unpin+0xa2/0x100 [iommufd] ? batch_unpin+0xba/0x100 [iommufd] __iopt_area_unfill_domain+0x198/0x430 [iommufd] ? __mutex_lock+0x8c/0xb80 ? __mutex_lock+0x6aa/0xb80 ? xa_erase+0x28/0x30 ? iopt_table_remove_domain+0x162/0x320 [iommufd] ? lock_release+0xbc/0x240 iopt_area_unfill_domain+0xd/0x10 [iommufd] iopt_table_remove_domain+0x195/0x320 [iommufd] iommufd_hw_pagetable_destroy+0xb3/0x110 [iommufd] iommufd_object_destroy_user+0x8e/0xf0 [iommufd] iommufd_device_detach+0xc5/0x140 [iommufd] iommufd_selftest_destroy+0x1f/0x70 [iommufd] iommufd_object_destroy_user+0x8e/0xf0 [iommufd] iommufd_destroy+0x3a/0x50 [iommufd] iommufd_fops_ioctl+0xfb/0x170 [iommufd] __x64_sys_ioctl+0x40d/0x9a0 do_syscall_64+0x3c/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Link: https://lore.kernel.org/r/3-v1-85aacb2af554+bc-iommufd_syz3_jgg@nvidia.com Cc: <stable@vger.kernel.org> Fixes: f394576 ("iommufd: PFN handling for iopt_pages") Reviewed-by: Kevin Tian <kevin.tian@intel.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Reported-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

…attrs() Running kunit test for 6.5-rc1 hits one bug: ok 10 damon_test_update_monitoring_result general protection fault, probably for non-canonical address 0x1bffa5c419cfb81: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 110 Comm: kunit_try_catch Tainted: G N 6.5.0-rc2 torvalds#15 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:damon_set_attrs+0xb9/0x120 Code: f8 00 00 00 4c 8d 58 e0 48 39 c3 74 ba 41 ba 59 17 b7 d1 49 8b 43 10 4d 8d 4b 10 48 8d 70 e0 49 39 c1 74 50 49 8b 40 08 31 d2 <69> 4e 18 10 27 00 00 49 f7 30 31 d2 48 89 c5 89 c8 f7 f5 31 d2 89 RSP: 0000:ffffc900005bfd40 EFLAGS: 00010246 RAX: ffffffff81159fc0 RBX: ffffc900005bfeb8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 01bffa5c419cfb69 RDI: ffffc900005bfd70 RBP: ffffc90000013c10 R08: ffffc900005bfdc0 R09: ffffffff81ff10ed R10: 00000000d1b71759 R11: ffffffff81ff10dd R12: ffffc90000013a78 R13: ffff88810eb78180 R14: ffffffff818297c0 R15: ffffc90000013c28 FS: 0000000000000000(0000) GS:ffff88813bd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000002a1c001 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> damon_test_set_attrs+0x63/0x1f0 kunit_generic_run_threadfn_adapter+0x17/0x30 kthread+0xfd/0x130 The problem seems to be related with the damon_ctx was used without being initialized. Fix it by adding the initialization. Link: https://lkml.kernel.org/r/20230718052811.1065173-1-feng.tang@intel.com Fixes: aa13779 ("mm/damon/core-test: add a test for damon_set_attrs()") Signed-off-by: Feng Tang <feng.tang@intel.com> Reviewed-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

If received skb in batadv_v_elp_packet_recv or batadv_v_ogm_packet_recv is either cloned or non linearized then its data buffer will be reallocated by batadv_check_management_packet when skb_cow or skb_linearize get called. Thus geting ethernet header address inside skb data buffer before batadv_check_management_packet had any chance to reallocate it could lead to the following kernel panic: Unable to handle kernel paging request at virtual address ffffff8020ab069a Mem abort info: ESR = 0x96000007 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x07: level 3 translation fault Data abort info: ISV = 0, ISS = 0x00000007 CM = 0, WnR = 0 swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000040f45000 [ffffff8020ab069a] pgd=180000007fffa003, p4d=180000007fffa003, pud=180000007fffa003, pmd=180000007fefe003, pte=0068000020ab0706 Internal error: Oops: 96000007 [#1] SMP Modules linked in: ahci_mvebu libahci_platform libahci dvb_usb_af9035 dvb_usb_dib0700 dib0070 dib7000m dibx000_common ath11k_pci ath10k_pci ath10k_core mwl8k_new nf_nat_sip nf_conntrack_sip xhci_plat_hcd xhci_hcd nf_nat_pptp nf_conntrack_pptp at24 sbsa_gwdt CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 5.15.42-00066-g3242268d425c-dirty torvalds#550 Hardware name: A8k (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : batadv_is_my_mac+0x60/0xc0 lr : batadv_v_ogm_packet_recv+0x98/0x5d0 sp : ffffff8000183820 x29: ffffff8000183820 x28: 0000000000000001 x27: ffffff8014f9af00 x26: 0000000000000000 x25: 0000000000000543 x24: 0000000000000003 x23: ffffff8020ab0580 x22: 0000000000000110 x21: ffffff80168ae880 x20: 0000000000000000 x19: ffffff800b561000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 00dc098924ae0032 x14: 0f0405433e0054b0 x13: ffffffff00000080 x12: 0000004000000001 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : ffffffc076dae000 x6 : ffffff8000183700 x5 : ffffffc00955e698 x4 : ffffff80168ae000 x3 : ffffff80059cf000 x2 : ffffff800b561000 x1 : ffffff8020ab0696 x0 : ffffff80168ae880 Call trace: batadv_is_my_mac+0x60/0xc0 batadv_v_ogm_packet_recv+0x98/0x5d0 batadv_batman_skb_recv+0x1b8/0x244 __netif_receive_skb_core.isra.0+0x440/0xc74 __netif_receive_skb_one_core+0x14/0x20 netif_receive_skb+0x68/0x140 br_pass_frame_up+0x70/0x80 br_handle_frame_finish+0x108/0x284 br_handle_frame+0x190/0x250 __netif_receive_skb_core.isra.0+0x240/0xc74 __netif_receive_skb_list_core+0x6c/0x90 netif_receive_skb_list_internal+0x1f4/0x310 napi_complete_done+0x64/0x1d0 gro_cell_poll+0x7c/0xa0 __napi_poll+0x34/0x174 net_rx_action+0xf8/0x2a0 _stext+0x12c/0x2ac run_ksoftirqd+0x4c/0x7c smpboot_thread_fn+0x120/0x210 kthread+0x140/0x150 ret_from_fork+0x10/0x20 Code: f9403844 eb03009f 54fffee1 f94 Thus ethernet header address should only be fetched after batadv_check_management_packet has been called. Fixes: 0da0035 ("batman-adv: OGMv2 - add basic infrastructure") Cc: stable@vger.kernel.org Signed-off-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

Normally, x->replay_esn and x->preplay_esn should be allocated at xfrm_alloc_replay_state_esn(...) in xfrm_state_construct(...), hence the xfrm_update_ae_params(...) is okay to update them. However, the current implementation of xfrm_new_ae(...) allows a malicious user to directly dereference a NULL pointer and crash the kernel like below. BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 8253067 P4D 8253067 PUD 8e0e067 PMD 0 Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 98 Comm: poc.npd Not tainted 6.4.0-rc7-00072-gdad9774deaf1 torvalds#8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.o4 RIP: 0010:memcpy_orig+0xad/0x140 Code: e8 4c 89 5f e0 48 8d 7f e0 73 d2 83 c2 20 48 29 d6 48 29 d7 83 fa 10 72 34 4c 8b 06 4c 8b 4e 08 c RSP: 0018:ffff888008f57658 EFLAGS: 00000202 RAX: 0000000000000000 RBX: ffff888008bd0000 RCX: ffffffff8238e571 RDX: 0000000000000018 RSI: ffff888007f64844 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff888008f57818 R13: ffff888007f64aa4 R14: 0000000000000000 R15: 0000000000000000 FS: 00000000014013c0(0000) GS:ffff88806d600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000054d8000 CR4: 00000000000006f0 Call Trace: <TASK> ? __die+0x1f/0x70 ? page_fault_oops+0x1e8/0x500 ? __pfx_is_prefetch.constprop.0+0x10/0x10 ? __pfx_page_fault_oops+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x11/0x40 ? fixup_exception+0x36/0x460 ? _raw_spin_unlock_irqrestore+0x11/0x40 ? exc_page_fault+0x5e/0xc0 ? asm_exc_page_fault+0x26/0x30 ? xfrm_update_ae_params+0xd1/0x260 ? memcpy_orig+0xad/0x140 ? __pfx__raw_spin_lock_bh+0x10/0x10 xfrm_update_ae_params+0xe7/0x260 xfrm_new_ae+0x298/0x4e0 ? __pfx_xfrm_new_ae+0x10/0x10 ? __pfx_xfrm_new_ae+0x10/0x10 xfrm_user_rcv_msg+0x25a/0x410 ? __pfx_xfrm_user_rcv_msg+0x10/0x10 ? __alloc_skb+0xcf/0x210 ? stack_trace_save+0x90/0xd0 ? filter_irq_stacks+0x1c/0x70 ? __stack_depot_save+0x39/0x4e0 ? __kasan_slab_free+0x10a/0x190 ? kmem_cache_free+0x9c/0x340 ? netlink_recvmsg+0x23c/0x660 ? sock_recvmsg+0xeb/0xf0 ? __sys_recvfrom+0x13c/0x1f0 ? __x64_sys_recvfrom+0x71/0x90 ? do_syscall_64+0x3f/0x90 ? entry_SYSCALL_64_after_hwframe+0x72/0xdc ? copyout+0x3e/0x50 netlink_rcv_skb+0xd6/0x210 ? __pfx_xfrm_user_rcv_msg+0x10/0x10 ? __pfx_netlink_rcv_skb+0x10/0x10 ? __pfx_sock_has_perm+0x10/0x10 ? mutex_lock+0x8d/0xe0 ? __pfx_mutex_lock+0x10/0x10 xfrm_netlink_rcv+0x44/0x50 netlink_unicast+0x36f/0x4c0 ? __pfx_netlink_unicast+0x10/0x10 ? netlink_recvmsg+0x500/0x660 netlink_sendmsg+0x3b7/0x700 This Null-ptr-deref bug is assigned CVE-2023-3772. And this commit adds additional NULL check in xfrm_update_ae_params to fix the NPD. Fixes: d8647b7 ("xfrm: Add user interface for esn and big anti-replay windows") Signed-off-by: Lin Ma <linma@zju.edu.cn> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

syzkaller found zero division error [0] in div_s64_rem() called from get_cycle_time_elapsed(), where sched->cycle_time is the divisor. We have tests in parse_taprio_schedule() so that cycle_time will never be 0, and actually cycle_time is not 0 in get_cycle_time_elapsed(). The problem is that the types of divisor are different; cycle_time is s64, but the argument of div_s64_rem() is s32. syzkaller fed this input and 0x100000000 is cast to s32 to be 0. @TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME={0xc, 0x8, 0x100000000} We use s64 for cycle_time to cast it to ktime_t, so let's keep it and set max for cycle_time. While at it, we prevent overflow in setup_txtime() and add another test in parse_taprio_schedule() to check if cycle_time overflows. Also, we add a new tdc test case for this issue. [0]: divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 1 PID: 103 Comm: kworker/1:3 Not tainted 6.5.0-rc1-00330-g60cc1f7d0605 AMDESE#3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:div_s64_rem include/linux/math64.h:42 [inline] RIP: 0010:get_cycle_time_elapsed net/sched/sch_taprio.c:223 [inline] RIP: 0010:find_entry_to_transmit+0x252/0x7e0 net/sched/sch_taprio.c:344 Code: 3c 02 00 0f 85 5e 05 00 00 48 8b 4c 24 08 4d 8b bd 40 01 00 00 48 8b 7c 24 48 48 89 c8 4c 29 f8 48 63 f7 48 99 48 89 74 24 70 <48> f7 fe 48 29 d1 48 8d 04 0f 49 89 cc 48 89 44 24 20 49 8d 85 10 RSP: 0018:ffffc90000acf260 EFLAGS: 00010206 RAX: 177450e0347560cf RBX: 0000000000000000 RCX: 177450e0347560cf RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000100000000 RBP: 0000000000000056 R08: 0000000000000000 R09: ffffed10020a0934 R10: ffff8880105049a7 R11: ffff88806cf3a520 R12: ffff888010504800 R13: ffff88800c00d800 R14: ffff8880105049a0 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88806cf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0edf84f0e8 CR3: 000000000d73c002 CR4: 0000000000770ee0 PKRU: 55555554 Call Trace: <TASK> get_packet_txtime net/sched/sch_taprio.c:508 [inline] taprio_enqueue_one+0x900/0xff0 net/sched/sch_taprio.c:577 taprio_enqueue+0x378/0xae0 net/sched/sch_taprio.c:658 dev_qdisc_enqueue+0x46/0x170 net/core/dev.c:3732 __dev_xmit_skb net/core/dev.c:3821 [inline] __dev_queue_xmit+0x1b2f/0x3000 net/core/dev.c:4169 dev_queue_xmit include/linux/netdevice.h:3088 [inline] neigh_resolve_output net/core/neighbour.c:1552 [inline] neigh_resolve_output+0x4a7/0x780 net/core/neighbour.c:1532 neigh_output include/net/neighbour.h:544 [inline] ip6_finish_output2+0x924/0x17d0 net/ipv6/ip6_output.c:135 __ip6_finish_output+0x620/0xaa0 net/ipv6/ip6_output.c:196 ip6_finish_output net/ipv6/ip6_output.c:207 [inline] NF_HOOK_COND include/linux/netfilter.h:292 [inline] ip6_output+0x206/0x410 net/ipv6/ip6_output.c:228 dst_output include/net/dst.h:458 [inline] NF_HOOK.constprop.0+0xea/0x260 include/linux/netfilter.h:303 ndisc_send_skb+0x872/0xe80 net/ipv6/ndisc.c:508 ndisc_send_ns+0xb5/0x130 net/ipv6/ndisc.c:666 addrconf_dad_work+0xc14/0x13f0 net/ipv6/addrconf.c:4175 process_one_work+0x92c/0x13a0 kernel/workqueue.c:2597 worker_thread+0x60f/0x1240 kernel/workqueue.c:2748 kthread+0x2fe/0x3f0 kernel/kthread.c:389 ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308 </TASK> Modules linked in: Fixes: 4cfd577 ("taprio: Add support for txtime-assist mode") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Co-developed-by: Eric Dumazet <edumazet@google.com> Co-developed-by: Pedro Tammela <pctammela@mojatatu.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>

The following warning was reported when running stress-mode enabled xdp_redirect_cpu with some RT threads: ------------[ cut here ]------------ WARNING: CPU: 4 PID: 65 at kernel/bpf/cpumap.c:135 CPU: 4 PID: 65 Comm: kworker/4:1 Not tainted 6.5.0-rc2+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Workqueue: events cpu_map_kthread_stop RIP: 0010:put_cpu_map_entry+0xda/0x220 ...... Call Trace: <TASK> ? show_regs+0x65/0x70 ? __warn+0xa5/0x240 ...... ? put_cpu_map_entry+0xda/0x220 cpu_map_kthread_stop+0x41/0x60 process_one_work+0x6b0/0xb80 worker_thread+0x96/0x720 kthread+0x1a5/0x1f0 ret_from_fork+0x3a/0x70 ret_from_fork_asm+0x1b/0x30 </TASK> The root cause is the same as commit 4369016 ("bpf: cpumap: Fix memory leak in cpu_map_update_elem"). The kthread is stopped prematurely by kthread_stop() in cpu_map_kthread_stop(), and kthread() doesn't call cpu_map_kthread_run() at all but XDP program has already queued some frames or skbs into ptr_ring. So when __cpu_map_ring_cleanup() checks the ptr_ring, it will find it was not emptied and report a warning. An alternative fix is to use __cpu_map_ring_cleanup() to drop these pending frames or skbs when kthread_stop() returns -EINTR, but it may confuse the user, because these frames or skbs have been handled correctly by XDP program. So instead of dropping these frames or skbs, just make sure the per-cpu kthread is running before __cpu_map_entry_alloc() returns. After apply the fix, the error handle for kthread_stop() will be unnecessary because it will always return 0, so just remove it. Fixes: 6710e11 ("bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP") Signed-off-by: Hou Tao <houtao1@huawei.com> Reviewed-by: Pu Lehui <pulehui@huawei.com> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Link: https://lore.kernel.org/r/20230729095107.1722450-2-houtao@huaweicloud.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

The following warning was reported when running xdp_redirect_cpu with both skb-mode and stress-mode enabled: ------------[ cut here ]------------ Incorrect XDP memory type (-2128176192) usage WARNING: CPU: 7 PID: 1442 at net/core/xdp.c:405 Modules linked in: CPU: 7 PID: 1442 Comm: kworker/7:0 Tainted: G 6.5.0-rc2+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Workqueue: events __cpu_map_entry_free RIP: 0010:__xdp_return+0x1e4/0x4a0 ...... Call Trace: <TASK> ? show_regs+0x65/0x70 ? __warn+0xa5/0x240 ? __xdp_return+0x1e4/0x4a0 ...... xdp_return_frame+0x4d/0x150 __cpu_map_entry_free+0xf9/0x230 process_one_work+0x6b0/0xb80 worker_thread+0x96/0x720 kthread+0x1a5/0x1f0 ret_from_fork+0x3a/0x70 ret_from_fork_asm+0x1b/0x30 </TASK> The reason for the warning is twofold. One is due to the kthread cpu_map_kthread_run() is stopped prematurely. Another one is __cpu_map_ring_cleanup() doesn't handle skb mode and treats skbs in ptr_ring as XDP frames. Prematurely-stopped kthread will be fixed by the preceding patch and ptr_ring will be empty when __cpu_map_ring_cleanup() is called. But as the comments in __cpu_map_ring_cleanup() said, handling and freeing skbs in ptr_ring as well to "catch any broken behaviour gracefully". Fixes: 11941f8 ("bpf: cpumap: Implement generic cpumap") Signed-off-by: Hou Tao <houtao1@huawei.com> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Link: https://lore.kernel.org/r/20230729095107.1722450-3-houtao@huaweicloud.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

Hou Tao says: ==================== The patchset fixes two reported warning in cpu-map when running xdp_redirect_cpu and some RT threads concurrently. Patch #1 fixes the warning in __cpu_map_ring_cleanup() when kthread is stopped prematurely. Patch AMDESE#2 fixes the warning in __xdp_return() when there are pending skbs in ptr_ring. Please see individual patches for more details. And comments are always welcome. ==================== Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

skbuff: skb_under_panic: text:ffffffff88771f69 len:56 put:-4 head:ffff88805f86a800 data:ffff887f5f86a850 tail:0x88 end:0x2c0 dev:pim6reg ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:192! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 2 PID: 22968 Comm: kworker/2:11 Not tainted 6.5.0-rc3-00044-g0a8db05b571a torvalds#236 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:skb_panic+0x152/0x1d0 Call Trace: <TASK> skb_push+0xc4/0xe0 ip6mr_cache_report+0xd69/0x19b0 reg_vif_xmit+0x406/0x690 dev_hard_start_xmit+0x17e/0x6e0 __dev_queue_xmit+0x2d6a/0x3d20 vlan_dev_hard_start_xmit+0x3ab/0x5c0 dev_hard_start_xmit+0x17e/0x6e0 __dev_queue_xmit+0x2d6a/0x3d20 neigh_connected_output+0x3ed/0x570 ip6_finish_output2+0x5b5/0x1950 ip6_finish_output+0x693/0x11c0 ip6_output+0x24b/0x880 NF_HOOK.constprop.0+0xfd/0x530 ndisc_send_skb+0x9db/0x1400 ndisc_send_rs+0x12a/0x6c0 addrconf_dad_completed+0x3c9/0xea0 addrconf_dad_work+0x849/0x1420 process_one_work+0xa22/0x16e0 worker_thread+0x679/0x10c0 ret_from_fork+0x28/0x60 ret_from_fork_asm+0x11/0x20 When setup a vlan device on dev pim6reg, DAD ns packet may sent on reg_vif_xmit(). reg_vif_xmit() ip6mr_cache_report() skb_push(skb, -skb_network_offset(pkt));//skb_network_offset(pkt) is 4 And skb_push declared as: void *skb_push(struct sk_buff *skb, unsigned int len); skb->data -= len; //0xffff88805f86a84c - 0xfffffffc = 0xffff887f5f86a850 skb->data is set to 0xffff887f5f86a850, which is invalid mem addr, lead to skb_push() fails. Fixes: 14fb64e ("[IPV6] MROUTE: Support PIM-SM (SSM).") Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

The nexthop code expects a 31 bit hash, such as what is returned by fib_multipath_hash() and rt6_multipath_hash(). Passing the 32 bit hash returned by skb_get_hash() can lead to problems related to the fact that 'int hash' is a negative number when the MSB is set. In the case of hash threshold nexthop groups, nexthop_select_path_hthr() will disproportionately select the first nexthop group entry. In the case of resilient nexthop groups, nexthop_select_path_res() may do an out of bounds access in nh_buckets[], for example: hash = -912054133 num_nh_buckets = 2 bucket_index = 65535 which leads to the following panic: BUG: unable to handle page fault for address: ffffc900025910c8 PGD 100000067 P4D 100000067 PUD 10026b067 PMD 0 Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI CPU: 4 PID: 856 Comm: kworker/4:3 Not tainted 6.5.0-rc2+ torvalds#34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:nexthop_select_path+0x197/0xbf0 Code: c1 e4 05 be 08 00 00 00 4c 8b 35 a4 14 7e 01 4e 8d 6c 25 00 4a 8d 7c 25 08 48 01 dd e8 c2 25 15 ff 49 8d 7d 08 e8 39 13 15 ff <4d> 89 75 08 48 89 ef e8 7d 12 15 ff 48 8b 5d 00 e8 14 55 2f 00 85 RSP: 0018:ffff88810c36f260 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000002000c0 RCX: ffffffffaf02dd77 RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffffc900025910c8 RBP: ffffc900025910c0 R08: 0000000000000001 R09: fffff520004b2219 R10: ffffc900025910cf R11: 31392d2068736168 R12: 00000000002000c0 R13: ffffc900025910c0 R14: 00000000fffef608 R15: ffff88811840e900 FS: 0000000000000000(0000) GS:ffff8881f7000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc900025910c8 CR3: 0000000129d00000 CR4: 0000000000750ee0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x1ee/0x5c0 ? __pfx_is_prefetch.constprop.0+0x10/0x10 ? __pfx_page_fault_oops+0x10/0x10 ? search_bpf_extables+0xfe/0x1c0 ? fixup_exception+0x3b/0x470 ? exc_page_fault+0xf6/0x110 ? asm_exc_page_fault+0x26/0x30 ? nexthop_select_path+0x197/0xbf0 ? nexthop_select_path+0x197/0xbf0 ? lock_is_held_type+0xe7/0x140 vxlan_xmit+0x5b2/0x2340 ? __lock_acquire+0x92b/0x3370 ? __pfx_vxlan_xmit+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 ? __pfx_register_lock_class+0x10/0x10 ? skb_network_protocol+0xce/0x2d0 ? dev_hard_start_xmit+0xca/0x350 ? __pfx_vxlan_xmit+0x10/0x10 dev_hard_start_xmit+0xca/0x350 __dev_queue_xmit+0x513/0x1e20 ? __pfx___dev_queue_xmit+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? mark_held_locks+0x44/0x90 ? skb_push+0x4c/0x80 ? eth_header+0x81/0xe0 ? __pfx_eth_header+0x10/0x10 ? neigh_resolve_output+0x215/0x310 ? ip6_finish_output2+0x2ba/0xc90 ip6_finish_output2+0x2ba/0xc90 ? lock_release+0x236/0x3e0 ? ip6_mtu+0xbb/0x240 ? __pfx_ip6_finish_output2+0x10/0x10 ? find_held_lock+0x83/0xa0 ? lock_is_held_type+0xe7/0x140 ip6_finish_output+0x1ee/0x780 ip6_output+0x138/0x460 ? __pfx_ip6_output+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 ? __pfx_ip6_finish_output+0x10/0x10 NF_HOOK.constprop.0+0xc0/0x420 ? __pfx_NF_HOOK.constprop.0+0x10/0x10 ? ndisc_send_skb+0x2c0/0x960 ? __pfx_lock_release+0x10/0x10 ? __local_bh_enable_ip+0x93/0x110 ? lock_is_held_type+0xe7/0x140 ndisc_send_skb+0x4be/0x960 ? __pfx_ndisc_send_skb+0x10/0x10 ? mark_held_locks+0x65/0x90 ? find_held_lock+0x83/0xa0 ndisc_send_ns+0xb0/0x110 ? __pfx_ndisc_send_ns+0x10/0x10 addrconf_dad_work+0x631/0x8e0 ? lock_acquire+0x180/0x3f0 ? __pfx_addrconf_dad_work+0x10/0x10 ? mark_held_locks+0x24/0x90 process_one_work+0x582/0x9c0 ? __pfx_process_one_work+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 ? mark_held_locks+0x24/0x90 worker_thread+0x93/0x630 ? __kthread_parkme+0xdc/0x100 ? __pfx_worker_thread+0x10/0x10 kthread+0x1a5/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 RIP: 0000:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0000:0000000000000000 EFLAGS: 00000000 ORIG_RAX: 0000000000000000 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: CR2: ffffc900025910c8 ---[ end trace 0000000000000000 ]--- RIP: 0010:nexthop_select_path+0x197/0xbf0 Code: c1 e4 05 be 08 00 00 00 4c 8b 35 a4 14 7e 01 4e 8d 6c 25 00 4a 8d 7c 25 08 48 01 dd e8 c2 25 15 ff 49 8d 7d 08 e8 39 13 15 ff <4d> 89 75 08 48 89 ef e8 7d 12 15 ff 48 8b 5d 00 e8 14 55 2f 00 85 RSP: 0018:ffff88810c36f260 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000002000c0 RCX: ffffffffaf02dd77 RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffffc900025910c8 RBP: ffffc900025910c0 R08: 0000000000000001 R09: fffff520004b2219 R10: ffffc900025910cf R11: 31392d2068736168 R12: 00000000002000c0 R13: ffffc900025910c0 R14: 00000000fffef608 R15: ffff88811840e900 FS: 0000000000000000(0000) GS:ffff8881f7000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000129d00000 CR4: 0000000000750ee0 PKRU: 55555554 Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x2ca00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fix this problem by ensuring the MSB of hash is 0 using a right shift - the same approach used in fib_multipath_hash() and rt6_multipath_hash(). Fixes: 1274e1c ("vxlan: ecmp support for mac fdb entries") Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>

Despite commit 0ad529d ("mptcp: fix possible divide by zero in recvmsg()"), the mptcp protocol is still prone to a race between disconnect() (or shutdown) and accept. The root cause is that the mentioned commit checks the msk-level flag, but mptcp_stream_accept() does acquire the msk-level lock, as it can rely directly on the first subflow lock. As reported by Christoph than can lead to a race where an msk socket is accepted after that mptcp_subflow_queue_clean() releases the listener socket lock and just before it takes destructive actions leading to the following splat: BUG: kernel NULL pointer dereference, address: 0000000000000012 PGD 5a4ca067 P4D 5a4ca067 PUD 37d4c067 PMD 0 Oops: 0000 [#1] PREEMPT SMP CPU: 2 PID: 10955 Comm: syz-executor.5 Not tainted 6.5.0-rc1-gdc7b257ee5dd torvalds#37 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 RIP: 0010:mptcp_stream_accept+0x1ee/0x2f0 include/net/inet_sock.h:330 Code: 0a 09 00 48 8b 1b 4c 39 e3 74 07 e8 bc 7c 7f fe eb a1 e8 b5 7c 7f fe 4c 8b 6c 24 08 eb 05 e8 a9 7c 7f fe 49 8b 85 d8 09 00 00 <0f> b6 40 12 88 44 24 07 0f b6 6c 24 07 bf 07 00 00 00 89 ee e8 89 RSP: 0018:ffffc90000d07dc0 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff888037e8d020 RCX: ffff88803b093300 RDX: 0000000000000000 RSI: ffffffff833822c5 RDI: ffffffff8333896a RBP: 0000607f82031520 R08: ffff88803b093300 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000003e83 R12: ffff888037e8d020 R13: ffff888037e8c680 R14: ffff888009af7900 R15: ffff888009af6880 FS: 00007fc26d708640(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000012 CR3: 0000000066bc5001 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> do_accept+0x1ae/0x260 net/socket.c:1872 __sys_accept4+0x9b/0x110 net/socket.c:1913 __do_sys_accept4 net/socket.c:1954 [inline] __se_sys_accept4 net/socket.c:1951 [inline] __x64_sys_accept4+0x20/0x30 net/socket.c:1951 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x47/0xa0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Address the issue by temporary removing the pending request socket from the accept queue, so that racing accept() can't touch them. After depleting the msk - the ssk still exists, as plain TCP sockets, re-insert them into the accept queue, so that later inet_csk_listen_stop() will complete the tcp socket disposal. Fixes: 2a6a870 ("mptcp: stops worker on unaccepted sockets at listener close") Cc: stable@vger.kernel.org Reported-by: Christoph Paasch <cpaasch@apple.com> Closes: multipath-tcp/mptcp_net-next#423 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-4-6671b1ab11cc@tessares.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Hold RTNL lock when calling xdp_set_features() with a registered netdev, as the call triggers the netdev notifiers. This could happen when switching from uplink rep to nic profile for example. This resolves the following call trace: RTNL: assertion failed at net/core/dev.c (1953) WARNING: CPU: 6 PID: 112670 at net/core/dev.c:1953 call_netdevice_notifiers_info+0x7c/0x80 Modules linked in: sch_mqprio sch_mqprio_lib act_tunnel_key act_mirred act_skbedit cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress bonding ib_umad ip_gre rdma_ucm mlx5_vfio_pci ipip tunnel4 ip6_gre gre mlx5_ib vfio_pci vfio_pci_core vfio_iommu_type1 ib_uverbs vfio mlx5_core ib_ipoib geneve nf_tables ip6_tunnel tunnel6 iptable_raw openvswitch nsh rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay zram zsmalloc fuse [last unloaded: ib_uverbs] CPU: 6 PID: 112670 Comm: devlink Not tainted 6.4.0-rc7_for_upstream_min_debug_2023_06_28_17_02 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:call_netdevice_notifiers_info+0x7c/0x80 Code: 90 ff 80 3d 2d 6b f7 00 00 75 c5 ba a1 07 00 00 48 c7 c6 e4 ce 0b 82 48 c7 c7 c8 f4 04 82 c6 05 11 6b f7 00 01 e8 a4 7c 8e ff <0f> 0b eb a2 0f 1f 44 00 00 55 48 89 e5 41 54 48 83 e4 f0 48 83 ec RSP: 0018:ffff8882a21c3948 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffff82e6f880 RCX: 0000000000000027 RDX: ffff88885f99b5c8 RSI: 0000000000000001 RDI: ffff88885f99b5c0 RBP: 0000000000000028 R08: ffff88887ffabaa8 R09: 0000000000000003 R10: ffff88887fecbac0 R11: ffff88887ff7bac0 R12: ffff8882a21c3968 R13: ffff88811c018940 R14: 0000000000000000 R15: ffff8881274401a0 FS: 00007fe141c81800(0000) GS:ffff88885f980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f787c28b948 CR3: 000000014bcf3005 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __warn+0x79/0x120 ? call_netdevice_notifiers_info+0x7c/0x80 ? report_bug+0x17c/0x190 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? call_netdevice_notifiers_info+0x7c/0x80 ? call_netdevice_notifiers_info+0x7c/0x80 call_netdevice_notifiers+0x2e/0x50 mlx5e_set_xdp_feature+0x21/0x50 [mlx5_core] mlx5e_nic_init+0xf1/0x1a0 [mlx5_core] mlx5e_netdev_init_profile+0x76/0x110 [mlx5_core] mlx5e_netdev_attach_profile+0x1f/0x90 [mlx5_core] mlx5e_netdev_change_profile+0x92/0x160 [mlx5_core] mlx5e_netdev_attach_nic_profile+0x1b/0x30 [mlx5_core] mlx5e_vport_rep_unload+0xaa/0xc0 [mlx5_core] __esw_offloads_unload_rep+0x52/0x60 [mlx5_core] mlx5_esw_offloads_rep_unload+0x52/0x70 [mlx5_core] esw_offloads_unload_rep+0x34/0x70 [mlx5_core] esw_offloads_disable+0x2b/0x90 [mlx5_core] mlx5_eswitch_disable_locked+0x1b9/0x210 [mlx5_core] mlx5_devlink_eswitch_mode_set+0xf5/0x630 [mlx5_core] ? devlink_get_from_attrs_lock+0x9e/0x110 devlink_nl_cmd_eswitch_set_doit+0x60/0xe0 genl_family_rcv_msg_doit.isra.0+0xc2/0x110 genl_rcv_msg+0x17d/0x2b0 ? devlink_get_from_attrs_lock+0x110/0x110 ? devlink_nl_cmd_eswitch_get_doit+0x290/0x290 ? devlink_pernet_pre_exit+0xf0/0xf0 ? genl_family_rcv_msg_doit.isra.0+0x110/0x110 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1f6/0x2c0 netlink_sendmsg+0x232/0x4a0 sock_sendmsg+0x38/0x60 ? _copy_from_user+0x2a/0x60 __sys_sendto+0x110/0x160 ? __count_memcg_events+0x48/0x90 ? handle_mm_fault+0x161/0x260 ? do_user_addr_fault+0x278/0x6e0 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7fe141b1340a Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007fff61d03de8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000afab00 RCX: 00007fe141b1340a RDX: 0000000000000038 RSI: 0000000000afab00 RDI: 0000000000000003 RBP: 0000000000afa910 R08: 00007fe141d80200 R09: 000000000000000c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001 </TASK> Fixes: 4d5ab0a ("net/mlx5e: take into account device reconfiguration for xdp_features flag") Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Fix handling IPv4 routes referencing a nexthop via its id by replacing calls to fib_info_nh() with fib_info_nhc(). Trying to add an IPv4 route referencing a nextop via nhid: $ ip link set up swp5 $ ip a a 10.0.0.1/24 dev swp5 $ ip nexthop add dev swp5 id 20 via 10.0.0.2 $ ip route add 10.0.1.0/24 nhid 20 triggers warnings when trying to handle the route: [ 528.805763] ------------[ cut here ]------------ [ 528.810437] WARNING: CPU: 3 PID: 53 at include/net/nexthop.h:468 __prestera_fi_is_direct+0x2c/0x68 [prestera] [ 528.820434] Modules linked in: prestera_pci act_gact act_police sch_ingress cls_u32 cls_flower prestera arm64_delta_tn48m_dn_led(O) arm64_delta_tn48m_dn_cpld(O) [last unloaded: prestera_pci] [ 528.837485] CPU: 3 PID: 53 Comm: kworker/u8:3 Tainted: G O 6.4.5 #1 [ 528.845178] Hardware name: delta,tn48m-dn (DT) [ 528.849641] Workqueue: prestera_ordered __prestera_router_fib_event_work [prestera] [ 528.857352] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 528.864347] pc : __prestera_fi_is_direct+0x2c/0x68 [prestera] [ 528.870135] lr : prestera_k_arb_fib_evt+0xb20/0xd50 [prestera] [ 528.876007] sp : ffff80000b20bc90 [ 528.879336] x29: ffff80000b20bc90 x28: 0000000000000000 x27: ffff0001374d3a48 [ 528.886510] x26: ffff000105604000 x25: ffff000134af8a28 x24: ffff0001374d3800 [ 528.893683] x23: ffff000101c89148 x22: ffff000101c89000 x21: ffff000101c89200 [ 528.900855] x20: ffff00013641fda0 x19: ffff800009d01088 x18: 0000000000000059 [ 528.908027] x17: 0000000000000277 x16: 0000000000000000 x15: 0000000000000000 [ 528.915198] x14: 0000000000000003 x13: 00000000000fe400 x12: 0000000000000000 [ 528.922371] x11: 0000000000000002 x10: 0000000000000aa0 x9 : ffff8000013d2020 [ 528.929543] x8 : 0000000000000018 x7 : 000000007b1703f8 x6 : 000000001ca72f86 [ 528.936715] x5 : 0000000033399ea7 x4 : 0000000000000000 x3 : ffff0001374d3acc [ 528.943886] x2 : 0000000000000000 x1 : ffff00010200de00 x0 : ffff000134ae3f80 [ 528.951058] Call trace: [ 528.953516] __prestera_fi_is_direct+0x2c/0x68 [prestera] [ 528.958952] __prestera_router_fib_event_work+0x100/0x158 [prestera] [ 528.965348] process_one_work+0x208/0x488 [ 528.969387] worker_thread+0x4c/0x430 [ 528.973068] kthread+0x120/0x138 [ 528.976313] ret_from_fork+0x10/0x20 [ 528.979909] ---[ end trace 0000000000000000 ]--- [ 528.984998] ------------[ cut here ]------------ [ 528.989645] WARNING: CPU: 3 PID: 53 at include/net/nexthop.h:468 __prestera_fi_is_direct+0x2c/0x68 [prestera] [ 528.999628] Modules linked in: prestera_pci act_gact act_police sch_ingress cls_u32 cls_flower prestera arm64_delta_tn48m_dn_led(O) arm64_delta_tn48m_dn_cpld(O) [last unloaded: prestera_pci] [ 529.016676] CPU: 3 PID: 53 Comm: kworker/u8:3 Tainted: G W O 6.4.5 #1 [ 529.024368] Hardware name: delta,tn48m-dn (DT) [ 529.028830] Workqueue: prestera_ordered __prestera_router_fib_event_work [prestera] [ 529.036539] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 529.043533] pc : __prestera_fi_is_direct+0x2c/0x68 [prestera] [ 529.049318] lr : __prestera_k_arb_fc_apply+0x280/0x2f8 [prestera] [ 529.055452] sp : ffff80000b20bc60 [ 529.058781] x29: ffff80000b20bc60 x28: 0000000000000000 x27: ffff0001374d3a48 [ 529.065953] x26: ffff000105604000 x25: ffff000134af8a28 x24: ffff0001374d3800 [ 529.073126] x23: ffff000101c89148 x22: ffff000101c89148 x21: ffff00013641fda0 [ 529.080299] x20: ffff000101c89000 x19: ffff000101c89020 x18: 0000000000000059 [ 529.087471] x17: 0000000000000277 x16: 0000000000000000 x15: 0000000000000000 [ 529.094642] x14: 0000000000000003 x13: 00000000000fe400 x12: 0000000000000000 [ 529.101814] x11: 0000000000000002 x10: 0000000000000aa0 x9 : ffff8000013cee80 [ 529.108985] x8 : 0000000000000018 x7 : 000000007b1703f8 x6 : 0000000000000018 [ 529.116157] x5 : 00000000d3497eb6 x4 : ffff000105604081 x3 : 000000008e979557 [ 529.123329] x2 : 0000000000000000 x1 : ffff00010200de00 x0 : ffff000134ae3f80 [ 529.130501] Call trace: [ 529.132958] __prestera_fi_is_direct+0x2c/0x68 [prestera] [ 529.138394] prestera_k_arb_fib_evt+0x6b8/0xd50 [prestera] [ 529.143918] __prestera_router_fib_event_work+0x100/0x158 [prestera] [ 529.150313] process_one_work+0x208/0x488 [ 529.154348] worker_thread+0x4c/0x430 [ 529.158030] kthread+0x120/0x138 [ 529.161274] ret_from_fork+0x10/0x20 [ 529.164867] ---[ end trace 0000000000000000 ]--- and results in a non offloaded route: $ ip route 10.0.0.0/24 dev swp5 proto kernel scope link src 10.0.0.1 rt_trap 10.0.1.0/24 nhid 20 via 10.0.0.2 dev swp5 rt_trap When creating a route referencing a nexthop via its ID, the nexthop will be stored in a separate nh pointer instead of the array of nexthops in the fib_info struct. This causes issues since fib_info_nh() only handles the nexthops array, but not the separate nh pointer, and will loudly WARN about it. In contrast fib_info_nhc() handles both, but returns a fib_nh_common pointer instead of a fib_nh pointer. Luckily we only ever access fields from the fib_nh_common parts, so we can just replace all instances of fib_info_nh() with fib_info_nhc() and access the fields via their fib_nh_common names. This allows handling IPv4 routes with an external nexthop, and they now get offloaded as expected: $ ip route 10.0.0.0/24 dev swp5 proto kernel scope link src 10.0.0.1 rt_trap 10.0.1.0/24 nhid 20 via 10.0.0.2 dev swp5 offload rt_offload Fixes: 396b80c ("net: marvell: prestera: Add neighbour cache accounting") Signed-off-by: Jonas Gorski <jonas.gorski@bisdn.de> Acked-by: Elad Nachman <enachman@marvell.com> Link: https://lore.kernel.org/r/20230804101220.247515-1-jonas.gorski@bisdn.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel says: ==================== nexthop: Nexthop dump fixes Patches #1 and AMDESE#3 fix two problems related to nexthops and nexthop buckets dump, respectively. Patch AMDESE#2 is a preparation for the third patch. The pattern described in these patches of splitting the NLMSG_DONE to a separate response is prevalent in other rtnetlink dump callbacks. I don't know if it's because I'm missing something or if this was done intentionally to ensure the message is delivered to user space. After commit 0642840 ("af_netlink: ensure that NLMSG_DONE never fails in dumps") this is no longer necessary and I can improve these dump callbacks assuming this analysis is correct. No regressions in existing tests: # ./fib_nexthops.sh [...] Tests passed: 230 Tests failed: 0 ==================== Link: https://lore.kernel.org/r/20230808075233.3337922-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When the tdm lane mask is computed, the driver currently fills the 1st lane before moving on to the next. If the stream has less channels than the lanes can accommodate, slots will be disabled on the last lanes. Unfortunately, the HW distribute channels in a different way. It distribute channels in pair on each lanes before moving on the next slots. This difference leads to problems if a device has an interface with more than 1 lane and with more than 2 slots per lane. For example: a playback interface with 2 lanes and 4 slots each (total 8 slots - zero based numbering) - Playing a 8ch stream: - All slots activated by the driver - channel AMDESE#2 will be played on lane #1 - slot #0 following HW placement - Playing a 4ch stream: - Lane #1 disabled by the driver - channel AMDESE#2 will be played on lane #0 - slot AMDESE#2 This behaviour is obviously not desirable. Change the way slots are activated on the TDM lanes to follow what the HW does and make sure each channel always get mapped to the same slot/lane. Fixes: 1a11d88 ("ASoC: meson: add tdm formatter base driver") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20230809171931.1244502-1-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>

[BUG] Syzbot reported a weird ASSERT() triggered inside prepare_to_merge(). assertion failed: root->reloc_root == reloc_root, in fs/btrfs/relocation.c:1919 ------------[ cut here ]------------ kernel BUG at fs/btrfs/relocation.c:1919! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 9904 Comm: syz-executor.3 Not tainted 6.4.0-syzkaller-08881-g533925cb7604 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023 RIP: 0010:prepare_to_merge+0xbb2/0xc40 fs/btrfs/relocation.c:1919 Code: fe e9 f5 (...) RSP: 0018:ffffc9000325f760 EFLAGS: 00010246 RAX: 000000000000004f RBX: ffff888075644030 RCX: 1481ccc522da5800 RDX: ffffc90005c09000 RSI: 00000000000364ca RDI: 00000000000364cb RBP: ffffc9000325f870 R08: ffffffff816f33ac R09: 1ffff9200064bea0 R10: dffffc0000000000 R11: fffff5200064bea1 R12: ffff888075644000 R13: ffff88803b166000 R14: ffff88803b166560 R15: ffff88803b166558 FS: 00007f4e305fd700(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000056080679c000 CR3: 00000000193ad000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> relocate_block_group+0xa5d/0xcd0 fs/btrfs/relocation.c:3749 btrfs_relocate_block_group+0x7ab/0xd70 fs/btrfs/relocation.c:4087 btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3283 __btrfs_balance+0x1b06/0x2690 fs/btrfs/volumes.c:4018 btrfs_balance+0xbdb/0x1120 fs/btrfs/volumes.c:4402 btrfs_ioctl_balance+0x496/0x7c0 fs/btrfs/ioctl.c:3604 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl+0xf8/0x170 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f4e2f88c389 [CAUSE] With extra debugging, the offending reloc_root is for quota tree (rootid 8). Normally we should not use the reloc tree for quota root at all, as reloc trees are only for subvolume trees. But there is a race between quota enabling and relocation, this happens after commit 8572417 ("btrfs: fix the btrfs_get_global_root return value"). Before that commit, for quota and free space tree, we exit immediately if we cannot grab it from fs_info. But now we would try to read it from disk, just as if they are fs trees, this sets ROOT_SHAREABLE flags in such race: Thread A | Thread B ---------------------------------+------------------------------ btrfs_quota_enable() | | | btrfs_get_root_ref() | | |- btrfs_get_global_root() | | | Returned NULL | | |- btrfs_lookup_fs_root() | | | Returned NULL |- btrfs_create_tree() | | | Now quota root item is | | | inserted | |- btrfs_read_tree_root() | | | Got the newly inserted quota root | | |- btrfs_init_fs_root() | | | Set ROOT_SHAREABLE flag [FIX] Get back to the old behavior by returning PTR_ERR(-ENOENT) if the target objectid is not a subvolume tree or data reloc tree. Reported-and-tested-by: syzbot+ae97a827ae1c3336bbb4@syzkaller.appspotmail.com Fixes: 8572417 ("btrfs: fix the btrfs_get_global_root return value") Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

The ndev was accessed on shutdown without a check if it actually exists. This triggered the crash pasted below. Instead of doing the ndev check, delete the shutdown handler altogether. The irqs will be released at the parent VF level (mlx5_core). BUG: kernel NULL pointer dereference, address: 0000000000000300 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 6.5.0-rc2_for_upstream_min_debug_2023_07_17_15_05 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5v_shutdown+0xe/0x50 [mlx5_vdpa] RSP: 0018:ffff8881003bfdc0 EFLAGS: 00010286 RAX: ffff888103befba0 RBX: ffff888109d28008 RCX: 0000000000000017 RDX: 0000000000000001 RSI: 0000000000000212 RDI: ffff888109d28000 RBP: 0000000000000000 R08: 0000000d3a3a3882 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: ffff888109d28000 R13: ffff888109d28080 R14: 00000000fee1dead R15: 0000000000000000 FS: 00007f4969e0be40(0000) GS:ffff88852c800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000300 CR3: 00000001051cd006 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die+0x20/0x60 ? page_fault_oops+0x14c/0x3c0 ? exc_page_fault+0x75/0x140 ? asm_exc_page_fault+0x22/0x30 ? mlx5v_shutdown+0xe/0x50 [mlx5_vdpa] device_shutdown+0x13e/0x1e0 kernel_restart+0x36/0x90 __do_sys_reboot+0x141/0x210 ? vfs_writev+0xcd/0x140 ? handle_mm_fault+0x161/0x260 ? do_writev+0x6b/0x110 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f496990fb56 RSP: 002b:00007fffc7bdde88 EFLAGS: 00000206 ORIG_RAX: 00000000000000a9 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f496990fb56 RDX: 0000000001234567 RSI: 0000000028121969 RDI: fffffffffee1dead RBP: 00007fffc7bde1d0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000000 R13: 00007fffc7bddf10 R14: 0000000000000000 R15: 00007fffc7bde2b8 </TASK> CR2: 0000000000000300 ---[ end trace 0000000000000000 ]--- Fixes: bc9a2b3 ("vdpa/mlx5: Support interrupt bypassing") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Message-Id: <20230803152648.199297-1-dtatulea@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

The current display probe is unable to differentiate between IVB Q and IVB D GT2 server, as they both have the same device id, but different subvendor and subdevice. This leads to the latter being misidentified as the former, and should just end up not having a display. However, the no display case returns a NULL as the display device info, and promptly oopses. As the IVB Q case is rare, and we're anyway moving towards GMD ID, handle the identification requiring subvendor and subdevice as a special case first, instead of unnecessarily growing the intel_display_ids[] array with subvendor and subdevice. [ 5.425298] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 5.426059] #PF: supervisor read access in kernel mode [ 5.426810] #PF: error_code(0x0000) - not-present page [ 5.427570] PGD 0 P4D 0 [ 5.428285] Oops: 0000 [#1] PREEMPT SMP PTI [ 5.429035] CPU: 0 PID: 137 Comm: (udev-worker) Not tainted 6.4.0-1-amd64 #1 Debian 6.4.4-1 [ 5.429759] Hardware name: HP HP Z220 SFF Workstation/HP Z220 SFF Workstation, BIOS 4.19-218-gb184e6e0a1 02/02/2023 [ 5.430485] RIP: 0010:intel_device_info_driver_create+0xf1/0x120 [i915] [ 5.431338] Code: 48 8b 97 80 1b 00 00 89 8f c0 1b 00 00 48 89 b7 b0 1b 00 00 48 89 97 b8 1b 00 00 0f b7 fd e8 76 e8 14 00 48 89 83 50 1b 00 00 <48> 8b 08 48 89 8b c4 1b 00 00 48 8b 48 08 48 89 8b cc 1b 00 00 8b [ 5.432920] RSP: 0018:ffffb8254044fb98 EFLAGS: 00010206 [ 5.433707] RAX: 0000000000000000 RBX: ffff923076e80000 RCX: 0000000000000000 [ 5.434494] RDX: 0000000000000260 RSI: 0000000100001000 RDI: 000000000000016a [ 5.435277] RBP: 000000000000016a R08: ffffb8254044fb00 R09: 0000000000000000 [ 5.436055] R10: ffff922d02761de8 R11: 00657361656c6572 R12: ffffffffc0e5d140 [ 5.436867] R13: ffff922d00b720d0 R14: 0000000076e80000 R15: ffff923078c0cae8 [ 5.437646] FS: 00007febd19a18c0(0000) GS:ffff92307c000000(0000) knlGS:0000000000000000 [ 5.438434] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.439218] CR2: 0000000000000000 CR3: 000000010256e002 CR4: 00000000001706f0 [ 5.440009] Call Trace: [ 5.440824] <TASK> [ 5.441611] ? __die+0x23/0x70 [ 5.442394] ? page_fault_oops+0x17d/0x4c0 [ 5.443173] ? exc_page_fault+0x7f/0x180 [ 5.443949] ? asm_exc_page_fault+0x26/0x30 [ 5.444756] ? intel_device_info_driver_create+0xf1/0x120 [i915] [ 5.445652] ? intel_device_info_driver_create+0xea/0x120 [i915] [ 5.446545] i915_driver_probe+0x7f/0xb60 [i915] [ 5.447431] ? drm_privacy_screen_get+0x15c/0x1a0 [drm] [ 5.448240] local_pci_probe+0x45/0xa0 [ 5.449013] pci_device_probe+0xc7/0x240 [ 5.449748] really_probe+0x19e/0x3e0 [ 5.450464] ? __pfx___driver_attach+0x10/0x10 [ 5.451172] __driver_probe_device+0x78/0x160 [ 5.451870] driver_probe_device+0x1f/0x90 [ 5.452601] __driver_attach+0xd2/0x1c0 [ 5.453293] bus_for_each_dev+0x88/0xd0 [ 5.453989] bus_add_driver+0x116/0x220 [ 5.454672] driver_register+0x59/0x100 [ 5.455336] i915_init+0x25/0xc0 [i915] [ 5.456104] ? __pfx_i915_init+0x10/0x10 [i915] [ 5.456882] do_one_initcall+0x5d/0x240 [ 5.457511] do_init_module+0x60/0x250 [ 5.458126] __do_sys_finit_module+0xac/0x120 [ 5.458721] do_syscall_64+0x60/0xc0 [ 5.459314] ? syscall_exit_to_user_mode+0x1b/0x40 [ 5.459897] ? do_syscall_64+0x6c/0xc0 [ 5.460510] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 5.461082] RIP: 0033:0x7febd20b0eb9 [ 5.461648] Code: 08 89 e8 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 2f 1f 0d 00 f7 d8 64 89 01 48 [ 5.462905] RSP: 002b:00007fffabb1ba78 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 5.463554] RAX: ffffffffffffffda RBX: 0000561e6304f410 RCX: 00007febd20b0eb9 [ 5.464201] RDX: 0000000000000000 RSI: 00007febd2244f0d RDI: 0000000000000015 [ 5.464869] RBP: 00007febd2244f0d R08: 0000000000000000 R09: 000000000000000a [ 5.465512] R10: 0000000000000015 R11: 0000000000000246 R12: 0000000000020000 [ 5.466124] R13: 0000000000000000 R14: 0000561e63032b60 R15: 000000000000000a [ 5.466700] </TASK> [ 5.467271] Modules linked in: i915(+) drm_buddy video crc32_pclmul sr_mod hid_generic wmi crc32c_intel i2c_algo_bit sd_mod cdrom drm_display_helper cec usbhid rc_core ghash_clmulni_intel hid sha512_ssse3 ttm sha512_generic xhci_pci ehci_pci xhci_hcd ehci_hcd nvme ahci drm_kms_helper nvme_core libahci t10_pi libata psmouse aesni_intel scsi_mod crypto_simd i2c_i801 scsi_common crc64_rocksoft_generic cryptd i2c_smbus drm lpc_ich crc64_rocksoft crc_t10dif e1000e usbcore crct10dif_generic usb_common crct10dif_pclmul crc64 crct10dif_common button [ 5.469750] CR2: 0000000000000000 [ 5.470364] ---[ end trace 0000000000000000 ]--- [ 5.470971] RIP: 0010:intel_device_info_driver_create+0xf1/0x120 [i915] [ 5.471699] Code: 48 8b 97 80 1b 00 00 89 8f c0 1b 00 00 48 89 b7 b0 1b 00 00 48 89 97 b8 1b 00 00 0f b7 fd e8 76 e8 14 00 48 89 83 50 1b 00 00 <48> 8b 08 48 89 8b c4 1b 00 00 48 8b 48 08 48 89 8b cc 1b 00 00 8b [ 5.473034] RSP: 0018:ffffb8254044fb98 EFLAGS: 00010206 [ 5.473698] RAX: 0000000000000000 RBX: ffff923076e80000 RCX: 0000000000000000 [ 5.474371] RDX: 0000000000000260 RSI: 0000000100001000 RDI: 000000000000016a [ 5.475045] RBP: 000000000000016a R08: ffffb8254044fb00 R09: 0000000000000000 [ 5.475725] R10: ffff922d02761de8 R11: 00657361656c6572 R12: ffffffffc0e5d140 [ 5.476405] R13: ffff922d00b720d0 R14: 0000000076e80000 R15: ffff923078c0cae8 [ 5.477124] FS: 00007febd19a18c0(0000) GS:ffff92307c000000(0000) knlGS:0000000000000000 [ 5.477811] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.478499] CR2: 0000000000000000 CR3: 000000010256e002 CR4: 00000000001706f0 Fixes: 69d4398 ("drm/i915/display: Make display responsible for probing its own IP") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8991 Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Luca Coelho <luciano.coelho@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230804084600.1005818-1-jani.nikula@intel.com (cherry picked from commit 1435188) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

With hardened usercopy enabled (CONFIG_HARDENED_USERCOPY=y), using the /proc/powerpc/rtas/firmware_update interface to prepare a system firmware update yields a BUG(): kernel BUG at mm/usercopy.c:102! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 0 PID: 2232 Comm: dd Not tainted 6.5.0-rc3+ AMDESE#2 Hardware name: IBM,8408-E8E POWER8E (raw) 0x4b0201 0xf000004 of:IBM,FW860.50 (SV860_146) hv:phyp pSeries NIP: c0000000005991d0 LR: c0000000005991cc CTR: 0000000000000000 REGS: c0000000148c76a0 TRAP: 0700 Not tainted (6.5.0-rc3+) MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 24002242 XER: 0000000c CFAR: c0000000001fbd34 IRQMASK: 0 [ ... GPRs omitted ... ] NIP usercopy_abort+0xa0/0xb0 LR usercopy_abort+0x9c/0xb0 Call Trace: usercopy_abort+0x9c/0xb0 (unreliable) __check_heap_object+0x1b4/0x1d0 __check_object_size+0x2d0/0x380 rtas_flash_write+0xe4/0x250 proc_reg_write+0xfc/0x160 vfs_write+0xfc/0x4e0 ksys_write+0x90/0x160 system_call_exception+0x178/0x320 system_call_common+0x160/0x2c4 The blocks of the firmware image are copied directly from user memory to objects allocated from flash_block_cache, so flash_block_cache must be created using kmem_cache_create_usercopy() to mark it safe for user access. Fixes: 6d07d1c ("usercopy: Restrict non-usercopy caches to size 0") Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by: Kees Cook <keescook@chromium.org> [mpe: Trim and indent oops] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230810-rtas-flash-vs-hardened-usercopy-v2-1-dcf63793a938@linux.ibm.com

One missing check in virtio_net_hdr_to_skb() allowed syzbot to crash kernels again [1] Do not allow gso_size to be set to GSO_BY_FRAGS (0xffff), because this magic value is used by the kernel. [1] general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077] CPU: 0 PID: 5039 Comm: syz-executor401 Not tainted 6.5.0-rc5-next-20230809-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 RIP: 0010:skb_segment+0x1a52/0x3ef0 net/core/skbuff.c:4500 Code: 00 00 00 e9 ab eb ff ff e8 6b 96 5d f9 48 8b 84 24 00 01 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e ea 21 00 00 48 8b 84 24 00 01 RSP: 0018:ffffc90003d3f1c8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 000000000001fffe RCX: 0000000000000000 RDX: 000000000000000e RSI: ffffffff882a3115 RDI: 0000000000000070 RBP: ffffc90003d3f378 R08: 0000000000000005 R09: 000000000000ffff R10: 000000000000ffff R11: 5ee4a93e456187d6 R12: 000000000001ffc6 R13: dffffc0000000000 R14: 0000000000000008 R15: 000000000000ffff FS: 00005555563f2380(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020020000 CR3: 000000001626d000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> udp6_ufo_fragment+0x9d2/0xd50 net/ipv6/udp_offload.c:109 ipv6_gso_segment+0x5c4/0x17b0 net/ipv6/ip6_offload.c:120 skb_mac_gso_segment+0x292/0x610 net/core/gso.c:53 __skb_gso_segment+0x339/0x710 net/core/gso.c:124 skb_gso_segment include/net/gso.h:83 [inline] validate_xmit_skb+0x3a5/0xf10 net/core/dev.c:3625 __dev_queue_xmit+0x8f0/0x3d60 net/core/dev.c:4329 dev_queue_xmit include/linux/netdevice.h:3082 [inline] packet_xmit+0x257/0x380 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3087 [inline] packet_sendmsg+0x24c7/0x5570 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:727 [inline] sock_sendmsg+0xd9/0x180 net/socket.c:750 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2496 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2550 __sys_sendmsg+0x117/0x1e0 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7ff27cdb34d9 Fixes: 3953c46 ("sk_buff: allow segmenting based on frag sizes") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Xin Long <lucien.xin@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://lore.kernel.org/r/20230816142158.1779798-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

During stress test with attaching and detaching VF from KVM and simultaneously changing VFs spoofcheck and trust there was a NULL pointer dereference in ice_reset_vf that VF's VSI is null. More than one instance of ice_reset_vf() can be running at a given time. When we rebuild the VSI in ice_reset_vf, another reset can be triaged from ice_service_task. In this case we can access the currently uninitialized VSI and cause panic. The window for this racing condition has been around for a long time but it's much worse after commit 227bf45 ("ice: move VSI delete outside deconfig") because the reset runs faster. ice_reset_vf() using vf->cfg_lock and when we move this lock before accessing to the VF VSI, we can fix BUG for all cases. Panic occurs sometimes in ice_vsi_is_rx_queue_active() and sometimes in ice_vsi_stop_all_rx_rings() With our reproducer, we can hit BUG: ~8h before commit 227bf45 ("ice: move VSI delete outside deconfig"). ~20m after commit 227bf45 ("ice: move VSI delete outside deconfig"). After this fix we are not able to reproduce it after ~48h There was commit cf90b74 ("ice: Fix call trace with null VSI during VF reset") which also tried to fix this issue, but it was only partially resolved and the bug still exists. [ 6420.658415] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 6420.665382] #PF: supervisor read access in kernel mode [ 6420.670521] #PF: error_code(0x0000) - not-present page [ 6420.675659] PGD 0 [ 6420.677679] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 6420.682038] CPU: 53 PID: 326472 Comm: kworker/53:0 Kdump: loaded Not tainted 5.14.0-317.el9.x86_64 #1 [ 6420.691250] Hardware name: Dell Inc. PowerEdge R750/04V528, BIOS 1.6.5 04/15/2022 [ 6420.698729] Workqueue: ice ice_service_task [ice] [ 6420.703462] RIP: 0010:ice_vsi_is_rx_queue_active+0x2d/0x60 [ice] [ 6420.705860] ice 0000:ca:00.0: VF 0 is now untrusted [ 6420.709494] Code: 00 00 66 83 bf 76 04 00 00 00 48 8b 77 10 74 3e 31 c0 eb 0f 0f b7 97 76 04 00 00 48 83 c0 01 39 c2 7e 2b 48 8b 97 68 04 00 00 <0f> b7 0c 42 48 8b 96 20 13 00 00 48 8d 94 8a 00 00 12 00 8b 12 83 [ 6420.714426] ice 0000:ca:00.0 ens7f0: Setting MAC 22:22:22:22:22:00 on VF 0. VF driver will be reinitialized [ 6420.733120] RSP: 0018:ff778d2ff383fdd8 EFLAGS: 00010246 [ 6420.733123] RAX: 0000000000000000 RBX: ff2acf1916294000 RCX: 0000000000000000 [ 6420.733125] RDX: 0000000000000000 RSI: ff2acf1f2c6401a0 RDI: ff2acf1a27301828 [ 6420.762346] RBP: ff2acf1a27301828 R08: 0000000000000010 R09: 0000000000001000 [ 6420.769476] R10: ff2acf1916286000 R11: 00000000019eba3f R12: ff2acf19066460d0 [ 6420.776611] R13: ff2acf1f2c6401a0 R14: ff2acf1f2c6401a0 R15: 00000000ffffffff [ 6420.783742] FS: 0000000000000000(0000) GS:ff2acf28ffa80000(0000) knlGS:0000000000000000 [ 6420.791829] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6420.797575] CR2: 0000000000000000 CR3: 00000016ad410003 CR4: 0000000000773ee0 [ 6420.804708] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 6420.811034] vfio-pci 0000:ca:01.0: enabling device (0000 -> 0002) [ 6420.811840] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 6420.811841] PKRU: 55555554 [ 6420.811842] Call Trace: [ 6420.811843] <TASK> [ 6420.811844] ice_reset_vf+0x9a/0x450 [ice] [ 6420.811876] ice_process_vflr_event+0x8f/0xc0 [ice] [ 6420.841343] ice_service_task+0x23b/0x600 [ice] [ 6420.845884] ? __schedule+0x212/0x550 [ 6420.849550] process_one_work+0x1e2/0x3b0 [ 6420.853563] ? rescuer_thread+0x390/0x390 [ 6420.857577] worker_thread+0x50/0x3a0 [ 6420.861242] ? rescuer_thread+0x390/0x390 [ 6420.865253] kthread+0xdd/0x100 [ 6420.868400] ? kthread_complete_and_exit+0x20/0x20 [ 6420.873194] ret_from_fork+0x1f/0x30 [ 6420.876774] </TASK> [ 6420.878967] Modules linked in: vfio_pci vfio_pci_core vfio_iommu_type1 vfio iavf vhost_net vhost vhost_iotlb tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nft_counter nf_tables bridge stp llc sctp ip6_udp_tunnel udp_tunnel nfp tls nfnetlink bluetooth mlx4_en mlx4_core rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs rfkill sunrpc intel_rapl_msr intel_rapl_common i10nm_edac nfit libnvdimm ipmi_ssif x86_pkg_temp_thermal intel_powerclamp coretemp irdma kvm_intel i40e kvm iTCO_wdt dcdbas ib_uverbs irqbypass iTCO_vendor_support mgag200 mei_me ib_core dell_smbios isst_if_mmio isst_if_mbox_pci rapl i2c_algo_bit drm_shmem_helper intel_cstate drm_kms_helper syscopyarea sysfillrect isst_if_common sysimgblt intel_uncore fb_sys_fops dell_wmi_descriptor wmi_bmof intel_vsec mei i2c_i801 acpi_ipmi ipmi_si i2c_smbus ipmi_devintf intel_pch_thermal acpi_power_meter pcspk r Fixes: efe4186 ("ice: Fix memory corruption in VF driver") Fixes: f23df52 ("ice: Fix spurious interrupt during removal of trusted VF") Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

… via GUP-fast In contrast to most other GUP code, GUP-fast common page table walking code like gup_pte_range() also handles hugetlb pages. But in contrast to other hugetlb page table walking code, it does not look at the hugetlb PTE abstraction whereby we have only a single logical hugetlb PTE per hugetlb page, even when using multiple cont-PTEs underneath -- which is for example what huge_ptep_get() abstracts. So when we have a hugetlb page that is mapped via cont-PTEs, GUP-fast might stumble over a PTE that does not map the head page of a hugetlb page -- not the first "head" PTE of such a cont mapping. Logically, the whole hugetlb page is mapped (entire_mapcount == 1), but we might end up calling gup_must_unshare() with a tail page of a hugetlb page. We only maintain a single PageAnonExclusive flag per hugetlb page (as hugetlb pages cannot get partially COW-shared), stored for the head page. That flag is clear for all tail pages. So when gup_must_unshare() ends up calling PageAnonExclusive() with a tail page of a hugetlb page: 1) With CONFIG_DEBUG_VM_PGFLAGS Stumbles over the: VM_BUG_ON_PGFLAGS(PageHuge(page) && !PageHead(page), page); For example, when executing the COW selftests with 64k hugetlb pages on arm64: [ 61.082187] page:00000000829819ff refcount:3 mapcount:1 mapping:0000000000000000 index:0x1 pfn:0x11ee11 [ 61.082842] head:0000000080f79bf7 order:4 entire_mapcount:1 nr_pages_mapped:0 pincount:2 [ 61.083384] anon flags: 0x17ffff80003000e(referenced|uptodate|dirty|head|mappedtodisk|node=0|zone=2|lastcpupid=0xfffff) [ 61.084101] page_type: 0xffffffff() [ 61.084332] raw: 017ffff800000000 fffffc00037b8401 0000000000000402 0000000200000000 [ 61.084840] raw: 0000000000000010 0000000000000000 00000000ffffffff 0000000000000000 [ 61.085359] head: 017ffff80003000e ffffd9e95b09b788 ffffd9e95b09b788 ffff0007ff63cf71 [ 61.085885] head: 0000000000000000 0000000000000002 00000003ffffffff 0000000000000000 [ 61.086415] page dumped because: VM_BUG_ON_PAGE(PageHuge(page) && !PageHead(page)) [ 61.086914] ------------[ cut here ]------------ [ 61.087220] kernel BUG at include/linux/page-flags.h:990! [ 61.087591] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP [ 61.087999] Modules linked in: ... [ 61.089404] CPU: 0 PID: 4612 Comm: cow Kdump: loaded Not tainted 6.5.0-rc4+ AMDESE#3 [ 61.089917] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 61.090409] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 61.090897] pc : gup_must_unshare.part.0+0x64/0x98 [ 61.091242] lr : gup_must_unshare.part.0+0x64/0x98 [ 61.091592] sp : ffff8000825eb940 [ 61.091826] x29: ffff8000825eb940 x28: 0000000000000000 x27: fffffc00037b8440 [ 61.092329] x26: 0400000000000001 x25: 0000000000080101 x24: 0000000000080000 [ 61.092835] x23: 0000000000080100 x22: ffff0000cffb9588 x21: ffff0000c8ec6b58 [ 61.093341] x20: 0000ffffad6b1000 x19: fffffc00037b8440 x18: ffffffffffffffff [ 61.093850] x17: 2864616548656761 x16: 5021202626202965 x15: 6761702865677548 [ 61.094358] x14: 6567615028454741 x13: 2929656761702864 x12: 6165486567615021 [ 61.094858] x11: 00000000ffff7fff x10: 00000000ffff7fff x9 : ffffd9e958b7a1c0 [ 61.095359] x8 : 00000000000bffe8 x7 : c0000000ffff7fff x6 : 00000000002bffa8 [ 61.095873] x5 : ffff0008bb19e708 x4 : 0000000000000000 x3 : 0000000000000000 [ 61.096380] x2 : 0000000000000000 x1 : ffff0000cf6636c0 x0 : 0000000000000046 [ 61.096894] Call trace: [ 61.097080] gup_must_unshare.part.0+0x64/0x98 [ 61.097392] gup_pte_range+0x3a8/0x3f0 [ 61.097662] gup_pgd_range+0x1ec/0x280 [ 61.097942] lockless_pages_from_mm+0x64/0x1a0 [ 61.098258] internal_get_user_pages_fast+0xe4/0x1d0 [ 61.098612] pin_user_pages_fast+0x58/0x78 [ 61.098917] pin_longterm_test_start+0xf4/0x2b8 [ 61.099243] gup_test_ioctl+0x170/0x3b0 [ 61.099528] __arm64_sys_ioctl+0xa8/0xf0 [ 61.099822] invoke_syscall.constprop.0+0x7c/0xd0 [ 61.100160] el0_svc_common.constprop.0+0xe8/0x100 [ 61.100500] do_el0_svc+0x38/0xa0 [ 61.100736] el0_svc+0x3c/0x198 [ 61.100971] el0t_64_sync_handler+0x134/0x150 [ 61.101280] el0t_64_sync+0x17c/0x180 [ 61.101543] Code: aa1303e0 f00074c1 912b0021 97fffeb2 (d4210000) 2) Without CONFIG_DEBUG_VM_PGFLAGS Always detects "not exclusive" for passed tail pages and refuses to PIN the tail pages R/O, as gup_must_unshare() == true. GUP-fast will fallback to ordinary GUP. As ordinary GUP properly considers the logical hugetlb PTE abstraction in hugetlb_follow_page_mask(), pinning the page will succeed when looking at the PageAnonExclusive on the head page only. So the only real effect of this is that with cont-PTE hugetlb pages, we'll always fallback from GUP-fast to ordinary GUP when not working on the head page, which ends up checking the head page and do the right thing. Consequently, the cow selftests pass with cont-PTE hugetlb pages as well without CONFIG_DEBUG_VM_PGFLAGS. Note that this only applies to anon hugetlb pages that are mapped using cont-PTEs: for example 64k hugetlb pages on a 4k arm64 kernel. ... and only when R/O-pinning (FOLL_PIN) such pages that are mapped into the page table R/O using GUP-fast. On production kernels (and even most debug kernels, that don't set CONFIG_DEBUG_VM_PGFLAGS) this patch should theoretically not be required to be backported. But of course, it does not hurt. Link: https://lkml.kernel.org/r/20230805101256.87306-1-david@redhat.com Fixes: a7f2266 ("mm/gup: trigger FAULT_FLAG_UNSHARE when R/O-pinning a possibly shared anonymous page") Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Tested-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Peter Xu <peterx@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

If ptp_clock_register() fails or CONFIG_PTP isn't enabled, avoid starting PTP related workqueues. In this way we can fix this: BUG: unable to handle page fault for address: ffffc9000440b6f8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 100000067 P4D 100000067 PUD 1001e0067 PMD 107dc5067 PTE 0 Oops: 0000 [#1] PREEMPT SMP [...] Workqueue: events igb_ptp_overflow_check RIP: 0010:igb_rd32+0x1f/0x60 [...] Call Trace: igb_ptp_read_82580+0x20/0x50 timecounter_read+0x15/0x60 igb_ptp_overflow_check+0x1a/0x50 process_one_work+0x1cb/0x3c0 worker_thread+0x53/0x3f0 ? rescuer_thread+0x370/0x370 kthread+0x142/0x160 ? kthread_associate_blkcg+0xc0/0xc0 ret_from_fork+0x1f/0x30 Fixes: 1f6e817 ("igb: Prevent dropped Tx timestamps via work items and interrupts.") Fixes: d339b13 ("igb: add PTP Hardware Clock code") Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230821171927.2203644-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

For multiple commands the driver was not correctly validating the shader stages resulting in possible kernel oopses. The validation code was only. if ever, checking the upper bound on the shader stages but never a lower bound (valid shader stages start at 1 not 0). Fixes kernel oopses ending up in vmw_binding_add, e.g.: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 2443 Comm: testcase Not tainted 6.3.0-rc4-vmwgfx #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 RIP: 0010:vmw_binding_add+0x4c/0x140 [vmwgfx] Code: 7e 30 49 83 ff 0e 0f 87 ea 00 00 00 4b 8d 04 7f 89 d2 89 cb 48 c1 e0 03 4c 8b b0 40 3d 93 c0 48 8b 80 48 3d 93 c0 49 0f af de <48> 03 1c d0 4c 01 e3 49 8> RSP: 0018:ffffb8014416b968 EFLAGS: 00010206 RAX: ffffffffc0933ec0 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 00000000ffffffff RSI: ffffb8014416b9c0 RDI: ffffb8014316f000 RBP: ffffb8014416b998 R08: 0000000000000003 R09: 746f6c735f726564 R10: ffffffffaaf2bda0 R11: 732e676e69646e69 R12: ffffb8014316f000 R13: ffffb8014416b9c0 R14: 0000000000000040 R15: 0000000000000006 FS: 00007fba8c0af740(0000) GS:ffff8a1277c80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000007c0933eb8 CR3: 0000000118244001 CR4: 00000000003706e0 Call Trace: <TASK> vmw_view_bindings_add+0xf5/0x1b0 [vmwgfx] ? ___drm_dbg+0x8a/0xb0 [drm] vmw_cmd_dx_set_shader_res+0x8f/0xc0 [vmwgfx] vmw_execbuf_process+0x590/0x1360 [vmwgfx] vmw_execbuf_ioctl+0x173/0x370 [vmwgfx] ? __drm_dev_dbg+0xb4/0xe0 [drm] ? __pfx_vmw_execbuf_ioctl+0x10/0x10 [vmwgfx] drm_ioctl_kernel+0xbc/0x160 [drm] drm_ioctl+0x2d2/0x580 [drm] ? __pfx_vmw_execbuf_ioctl+0x10/0x10 [vmwgfx] ? do_fault+0x1a6/0x420 vmw_generic_ioctl+0xbd/0x180 [vmwgfx] vmw_unlocked_ioctl+0x19/0x20 [vmwgfx] __x64_sys_ioctl+0x96/0xd0 do_syscall_64+0x5d/0x90 ? handle_mm_fault+0xe4/0x2f0 ? debug_smp_processor_id+0x1b/0x30 ? fpregs_assert_state_consistent+0x2e/0x50 ? exit_to_user_mode_prepare+0x40/0x180 ? irqentry_exit_to_user_mode+0xd/0x20 ? irqentry_exit+0x3f/0x50 ? exc_page_fault+0x8b/0x180 entry_SYSCALL_64_after_hwframe+0x72/0xdc Signed-off-by: Zack Rusin <zackr@vmware.com> Cc: security@openanolis.org Reported-by: Ziming Zhang <ezrakiez@gmail.com> Testcase-found-by: Niels De Graef <ndegraef@redhat.com> Fixes: d80efd5 ("drm/vmwgfx: Initial DX support") Cc: <stable@vger.kernel.org> # v4.3+ Reviewed-by: Maaz Mombasawala<mombasawalam@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230616190934.54828-1-zack@kde.org

Ignore this commit, please see PR message

9b554d3

Signed-off-by: Cole Robinson <crobinso@redhat.com>

crobinso changed the base branch from master to svsm-vtpm-preview-guest February 27, 2023 15:16

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Delete old irrelevant AMDESE/linux branches from svsm-vtpm/linux? #1

Delete old irrelevant AMDESE/linux branches from svsm-vtpm/linux? #1

Uh oh!

crobinso commented Feb 26, 2023

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

1 participant

Delete old irrelevant AMDESE/linux branches from svsm-vtpm/linux? #1

Are you sure you want to change the base?

Delete old irrelevant AMDESE/linux branches from svsm-vtpm/linux? #1

Uh oh!

Conversation

crobinso commented Feb 26, 2023

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

1 participant