Skip to content

spm81/Multi-UVTools

BranchesTags

Repository files navigation

Multi-UVTools

🌐 Aceder ao Site / Access the Website

🇵🇹 Português

Ferramenta web para flash de firmware em rádios Quansheng, TID, Radtel e outros diretamente no browser.

✨ Funcionalidades

  • Flash de Firmware para UV-K5, UV-K6 e UV-5R Plus
  • Flash de Firmware para UV-K5 V3 e UV-K1
  • Flash de Firmware para TD-H3 e TD-H8
  • Flash de Firmware para RT-880 e iRadio UV-98
  • Firmwares Stock da Quansheng incluídos
  • Firmwares Custom (Matoz, F4HWN, Calypso, Joaquim, Fagci e outros)
  • Leitura/Escrita de EEPROM
  • Display Mirror - Espelha o ecrã do rádio em tempo real
  • SMR - Monitorização de sinal em tempo real
  • Spectrum Analyzer - Analisador de espectro via UART (requer MCFW v1.35.1D)
  • Suporte para TK11, RT890, TD-H3/H8 e RT-880
  • Funciona diretamente no browser via WebSerial API
  • Não requer instalação de software

📻 Rádios Suportados - Quansheng

Modelo Flash Firmware EEPROM Display Mirror Spectrum
UV-K5 ✅ ✅ ✅ ✅
UV-K6 ✅ ✅ ✅ ✅
UV-5R Plus ✅ ✅ ✅ ✅
UV-K5 V3 ✅ ✅ ✅ ✅
UV-K1 ✅ ✅ ✅ ✅

📻 Rádios Suportados - TK11 / RT890

Modelo Flash SPI Channels Settings
RT890 ✅ ✅ - -
TK11 ❌ - ✅ ✅

⚠️ Nota: O TK11 não suporta Flash... ainda.

📻 Rádios Suportados - TID TD-H3/H8

Modelo Flash Channels Band Plan Codeplug
TD-H3 ✅ ✅ ✅ ✅
TD-H8 ✅ ✅ ✅ ✅

📻 Rádios Suportados - Radtel RT-880 / iRadio UV-98

Modelo Flash Monitor SPI Backup
RT-880 ✅ ✅ ✅
iRadio UV-98 ✅ ✅ ✅

🛡️ Proteção Anti-Brick (UV-K5)

O Multi-UVTools inclui proteção automática para evitar que rádios UV-K5 (originais) sejam flashados acidentalmente com firmware K1/K5v3:

K5 Protection Warning

Bootloaders bloqueados na página K1 Flash:

  • 2.00.06 - UV-K5 original
  • 5.00.01 e qualquer 5.xx.xx - UV-K5 v2

Se detectado um destes bootloaders, o flash é automaticamente bloqueado para proteger o teu rádio!

📡 Spectrum Analyzer

O Spectrum Analyzer permite monitorizar o espectro de rádio em tempo real:

Funcionalidade Descrição
5 Modos Spectrum, Channel, Scan, CTCSS/DCS, Blink
70 Presets Bandas de rádio pré-configuradas
CTCSS/DCS Detecção automática de tons
Logging Registo de actividade com exportação

⚠️ Requisitos: Firmware MCFW v1.35.1D e rádio em modo Spectrum (F+5)

🪞 Display Mirror - Compatibilidade

O Display Mirror suporta múltiplos perfis de firmware:

Perfil Firmwares Compatíveis Baudrate
Joaquim UV-KX UV-KX Firmware (todas as versões) 38400 / 115200
F4HWN UV-K5v1/v3 UV-K1 F4HWN Custom Firmware (algumas versões) 38400 / 115200

💡 Nota: O baudrate é flexível - seleciona o baudrate que corresponde à versão do teu firmware.

✉️ SMR - Compatibilidade

O SMR suporta os seguintes firmwares:

Perfil Firmwares Compatíveis
Joaquim UV-KX UV-KX Firmware, MCFW V0.33.0C, MCFW V0.34.0C

🚀 Como Usar

Flash UV-K5/K6/5R Plus

  1. Acede a spm81.github.io/Multi-UVTools
  2. Conecta o rádio em modo boot (pressiona PTT enquanto ligas)
  3. Seleciona o firmware desejado
  4. Clica em Flash!

Flash TD-H3/H8

  1. Seleciona "📻 TD-H3/H8" no menu
  2. Desliga o rádio
  3. Pressiona PTT + Power para entrar em modo bootloader
  4. Seleciona o firmware e clica Flash

Flash RT-880

  1. Seleciona "📻 RT-880" no menu
  2. Desliga o rádio
  3. Pressiona PTT + Power para entrar em modo bootloader
  4. Seleciona o firmware e clica Flash

📚 Documentação

🇬🇧 English

Web-based firmware flashing tool for Quansheng, TID, Radtel and other radios directly in your browser.

✨ Features

  • Firmware Flash for UV-K5, UV-K6 and UV-5R Plus
  • Firmware Flash for UV-K5 V3 and UV-K1
  • Firmware Flash for TD-H3 and TD-H8
  • Firmware Flash for RT-880 and iRadio UV-98
  • Stock Firmwares from Quansheng included
  • Custom Firmwares (Matoz, F4HWN, Calypso, Joaquim, Fagci and more)
  • EEPROM Read/Write
  • Display Mirror - Mirror the radio display in real time
  • SMR - Signal monitoring in real time
  • Spectrum Analyzer - Spectrum analyzer via UART (requires MCFW v1.35.1D)
  • Support for TK11, RT890, TD-H3/H8 and RT-880
  • Works directly in browser via WebSerial API
  • No software installation required

📻 Supported Radios - Quansheng

Model Flash Firmware EEPROM Display Mirror Spectrum
UV-K5 ✅ ✅ ✅ ✅
UV-K6 ✅ ✅ ✅ ✅
UV-5R Plus ✅ ✅ ✅ ✅
UV-K5 V3 ✅ ✅ ✅ ✅
UV-K1 ✅ ✅ ✅ ✅

📻 Supported Radios - TK11 / RT890

Model Flash SPI Channels Settings
RT890 ✅ ✅ - -
TK11 ❌ - ✅ ✅

⚠️ Note: TK11 does not support Flash... yet

📻 Supported Radios - TID TD-H3/H8

Model Flash Channels Band Plan Codeplug
TD-H3 ✅ ✅ ✅ ✅
TD-H8 ✅ ✅ ✅ ✅

📻 Supported Radios - Radtel RT-880 / iRadio UV-98

Model Flash Monitor SPI Backup
RT-880 ✅ ✅ ✅
iRadio UV-98 ✅ ✅ ✅

🛡️ Anti-Brick Protection (UV-K5)

Multi-UVTools includes automatic protection to prevent original UV-K5 radios from being accidentally flashed with K1/K5v3 firmware:

K5 Protection Warning

Blocked bootloaders on K1 Flash page:

  • 2.00.06 - Original UV-K5
  • 5.00.01 and any 5.xx.xx - UV-K5 v2

If one of these bootloaders is detected, flash is automatically blocked to protect your radio!

📡 Spectrum Analyzer

The Spectrum Analyzer allows real-time radio spectrum monitoring:

Feature Description
5 Modes Spectrum, Channel, Scan, CTCSS/DCS, Blink
70 Presets Pre-configured radio bands
CTCSS/DCS Automatic tone detection
Logging Activity logging with export

⚠️ Requirements: MCFW v1.35.1D firmware and radio in Spectrum mode (F+5)

🪞 Display Mirror - Compatibility

The Display Mirror supports multiple firmware profiles:

Profile Compatible Firmwares Baudrate
Joaquim UV-KX UV-KX Firmware (all versions) 38400 / 115200
F4HWN UV-K5v1/v3 UV-K1 F4HWN Custom Firmware (some versions) 38400 / 115200

💡 Note: Baudrate is flexible - select the baudrate that matches your firmware version.

✉️ SMR - Compatibility

The SMR supports the following firmwares:

Profile Compatible Firmwares
Joaquim UV-KX UV-KX Firmware, MCFW V0.33.0C, MCFW V0.34.0C

🚀 How to Use

Flash UV-K5/K6/5R Plus

  1. Go to spm81.github.io/Multi-UVTools
  2. Connect the radio in boot mode (hold PTT while turning on)
  3. Select the desired firmware
  4. Click Flash!

Flash TD-H3/H8

  1. Select "📻 TD-H3/H8" from the menu
  2. Turn off the radio
  3. Press PTT + Power to enter bootloader mode
  4. Select firmware and click Flash

Flash RT-880

  1. Select "📻 RT-880" from the menu
  2. Turn off the radio
  3. Press PTT + Power to enter bootloader mode
  4. Select firmware and click Flash

📚 Documentation

🤝 Contribuir / Contributing

Este projeto é open source! Podes contribuir com:

  • Pull requests
  • Reportar bugs
  • Sugerir novos firmwares
  • Adicionar o teu firmware personalizado

This project is open source! You can contribute by:

  • Pull requests
  • Reporting bugs
  • Suggesting new firmwares
  • Add your custom firmware

📄 Licença / License

Open Source - Feel free to use and contribute!

Made with ❤️ by spm81 (Matoz)

About

QuanSheng UV-K5 (All models) & UV-K1 UVTOOL and more...

spm81.github.io/Multi-UVTools/

Resources

Readme
Activity

Stars

10 stars

Watchers

1 watching

Forks

5 forks
Report repository

Releases

No releases published

Packages

 
 
 

Contributors

Languages