Add update instruments

.gitignore

@@ -1,2 +1,3 @@
+.DS_Store
 .venv
 __pycache__

instrument_definitions/Moog Grandmother.txt

@@ -0,0 +1,126 @@
+VERSION 1 # Currently, this should only be 1.
+
+# Supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
+TRACKNAME Grandmother
+
+# Can be POLY, DRUM, MPE, or NULL
+TYPE POLY
+
+# Can be A, B, C, D, USBD, USBH, CVGx (x between 1&4), CVx, Gx, or NULL
+OUTPORT NULL
+
+# Can be x (between 1-16), or NULL -- this is ignored if output port is not MIDI
+OUTCHAN NULL
+
+# Can be NONE, ALLACTIVE, A, B, USBH, USBD, CVG, or NULL
+INPORT NULL
+
+# Can be x (between 1-16), ALL, or NULL. This definition will be ignored if INPORT is NONE, ALLACTIVE or CVG
+INCHAN NULL
+
+# DRUMLANES
+# Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
+# ROW must be between 1 and 8
+# TRIG can be between 0 and 127, or NULL
+# CHAN can be a number between 1 and 16, Gx, CVx, CVGx (x between 1 and 4), or NULL
+# NOTENUMBER can be between 0 and 127, or NULL
+# NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
+# Please note this section will be discarded for tracks which are not DRUM tracks
+[DRUMLANES]
+[/DRUMLANES]
+
+
+# PC
+# Syntax: NUMBER NAME
+# number must be either:
+#   - A number (for simple PC)
+#   - Three numbers, delimited by ':', which represent PC:MSB:LSB. You can put 'NULL' to not set the MSB/LSB.
+# PC must be between 1...128
+# MSB/LSB must be between 0...127
+[PC]
+[/PC]
+
+
+# CC
+# Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
+# DEFAULT_VALUE must be a valid number between 0 and 127
+[CC]
+
+1:0 Mod Wheel
+3:0 Mod Rate
+65:0 Glide On/Off
+5:0 Glide Time
+85:0 Glide Type
+103:64 Gated Glide On/Off
+94:0 Legato Glide
+
+
+12:0 Osc 2 Freq
+74:64 Osc 1 Octave
+75:64 Osc 2 Octave
+77:0 Osc 2 Sync On/Off
+
+
+8:0 Arp Rate
+73:0 Arp Play On/Off
+69:0 Arp Hold On/Off
+90:0 Arp/ Seq Clock Division
+91:0 Arp Mode
+92:0 Arp Pattern
+93:0 Arp Range/ SEQ Number
+
+89:51 Keyboard Octave
+107:0 Pitch Bend Up Amount
+108:0 Pitch Bend Down Amount
+119:61 KB Transpose (Semitones)
+
+64:0 Sustain Pedal On/Off
+120:0 All Sounds Off
+[/CC]
+
+
+# NRPN
+# Syntax: "MSB:LSB:DEPTH NAME" or "MSB:LSB:DEPTH:DEFAULT=xx NAME"
+# Lsb & msb should be between 0 and 127
+# DEPTH can be 7 or 14
+# For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
+[NRPN]
+[/NRPN]
+
+
+# ASSIGN
+# Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
+# POT_NUMBER must be between 1 and 8
+# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN", or "NULL" (this won't assign the pot).
+# Non explicitly-defined pots will be considered "NULL"
+# VALUE VALIDATION
+#### For CC: Value must be a valid number between 0 and 119
+#### For PB and AT, any text after the TYPE will be ignored
+#### For CV, value must be between 1 and 4
+#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
+# DEFAULT VALUE
+#### For CC: DEFAULT_VALUE must be a valid number between 0 and 127
+#### For PB: DEFAULT_VALUE must be a valid number between 0 and 16383
+#### For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
+#### For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. "-4.25V" or "1.7V"
+#### Please note default value will be ignored for PB and AT messages.
+[ASSIGN]
+[/ASSIGN]
+
+
+# AUTOMATION
+# Syntax: TYPE:VALUE
+# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN"
+# VALUE VALIDATION
+#### For CC: Value must be a valid number between 0 and 119
+#### For PB and AT, any text after the TYPE will be ignored
+#### For CV, value must be between 1 and 4
+#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
+[AUTOMATION]
+[/AUTOMATION]
+
+
+# This section will be readable from Hapax.
+[COMMENT]
+Template for Moog Grandmother
+[/COMMENT]

instrument_definitions/Moog Minitaur.txt

@@ -0,0 +1,135 @@
+VERSION 1 # Currently, this should only be 1.
+
+# Supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
+TRACKNAME Minitaur
+
+# Can be POLY, DRUM, MPE, or NULL
+TYPE POLY
+
+# Can be A, B, C, D, USBD, USBH, CVGx (x between 1&4), CVx, Gx, or NULL
+OUTPORT NULL
+
+# Can be x (between 1-16), or NULL -- this is ignored if output port is not MIDI
+OUTCHAN NULL
+
+# Can be NONE, ALLACTIVE, A, B, USBH, USBD, CVG, or NULL
+INPORT NULL
+
+# Can be x (between 1-16), ALL, or NULL. This definition will be ignored if INPORT is NONE, ALLACTIVE or CVG
+INCHAN NULL
+
+# DRUMLANES
+# Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
+# ROW must be between 1 and 8
+# TRIG can be between 0 and 127, or NULL
+# CHAN can be a number between 1 and 16, Gx, CVx, CVGx (x between 1 and 4), or NULL
+# NOTENUMBER can be between 0 and 127, or NULL
+# NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
+# Please note this section will be discarded for tracks which are not DRUM tracks
+[DRUMLANES]
+[/DRUMLANES]
+
+
+# PC
+# Syntax: NUMBER NAME
+# number must be either:
+#   - A number (for simple PC)
+#   - Three numbers, delimited by ':', which represent PC:MSB:LSB. You can put 'NULL' to not set the MSB/LSB.
+# PC must be between 1...128
+# MSB/LSB must be between 0...127
+[PC]
+[/PC]
+
+
+# CC
+# Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
+# DEFAULT_VALUE must be a valid number between 0 and 127
+[CC]
+3:35 LFO Rate
+13:45 LFO VCO Amount
+12:44 LFO VCF Amount
+87 LFO MIDI Sync
+86 LFO Sync Clock
+82:DEFAULT=0 LFO Key Trigger
+70 VCO1 Wave
+71 VCO2 Wave
+17:49 VCO2 Freq
+18:50 VCO2 Beat
+81:DEFAULT=0 Note Sync
+5:0 Glide Rate
+65 Glide Switch
+92 Glide Type
+83:DEFAULT=0 Legato Glide
+15:47 VCO1 Level
+16:48 VCO2 Level
+27:59 Ext In Level
+19:51 Filter Cutoff
+21:52 Filter Resonance
+22:50 Filter EG Amount
+20:54 Filter KB Track
+89:DEFAULT=64 Filter Vel Sens
+23:55 VCF Attack
+24:56 VCF DecayRelease
+25:57 VCF Sustain
+28:60 VCA Attack
+29:61 VCA DecayRelease
+30:62 VCA Sustain
+72 Release Switch
+73:DEFAULT=0 Trigger Mode
+7:39 VCA Output Level
+90:DEFAULT=64 Volume Vel Sens
+91:DEFAULT=127 Key Priority
+1:33 Mod Wheel
+107:DEFAULT=32 Bend Up Amount
+108:DEFAULT=32 Bend Down Amount
+122:DEFAULT=127 Local Control Off
+120 All Sounds Off
+123 All Notes Off
+[/CC]
+
+
+# NRPN
+# Syntax: "MSB:LSB:DEPTH NAME" or "MSB:LSB:DEPTH:DEFAULT=xx NAME"
+# Lsb & msb should be between 0 and 127
+# DEPTH can be 7 or 14
+# For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
+[NRPN]
+[/NRPN]
+
+
+# ASSIGN
+# Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
+# POT_NUMBER must be between 1 and 8
+# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN", or "NULL" (this won't assign the pot).
+# Non explicitly-defined pots will be considered "NULL"
+# VALUE VALIDATION
+#### For CC: Value must be a valid number between 0 and 119
+#### For PB and AT, any text after the TYPE will be ignored
+#### For CV, value must be between 1 and 4
+#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
+# DEFAULT VALUE
+#### For CC: DEFAULT_VALUE must be a valid number between 0 and 127
+#### For PB: DEFAULT_VALUE must be a valid number between 0 and 16383
+#### For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
+#### For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. "-4.25V" or "1.7V"
+#### Please note default value will be ignored for PB and AT messages.
+[ASSIGN]
+[/ASSIGN]
+
+
+# AUTOMATION
+# Syntax: TYPE:VALUE
+# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN"
+# VALUE VALIDATION
+#### For CC: Value must be a valid number between 0 and 119
+#### For PB and AT, any text after the TYPE will be ignored
+#### For CV, value must be between 1 and 4
+#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
+[AUTOMATION]
+[/AUTOMATION]
+
+
+# This section will be readable from Hapax.
+[COMMENT]
+Moog Minitaur
+[/COMMENT]