Add a Slicer config bundle

Slic3r-settings/Slic3r_config_bundle.ini

@@ -0,0 +1,226 @@
+# generated by Slic3r 1.2.0 on Wed Aug  6 17:32:11 2014
+
+[filament:Ormerod-0.5]
+bed_temperature = 57
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_diameter = 1.75
+first_layer_bed_temperature = 57
+first_layer_temperature = 200
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 10
+slowdown_below_layer_time = 15
+temperature = 190
+
+[presets]
+filament = Ormerod-0.5.ini
+print = Ormerod-0.5.ini
+printer = Ormerod-0.5.ini
+
+[print:Ormerod-0.5]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 30
+brim_width = 0
+complete_objects = 0
+default_acceleration = 0
+external_perimeter_speed = 30
+external_perimeters_first = 1
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.5
+fill_angle = 45
+fill_density = 25%
+fill_pattern = rectilinear
+first_layer_extrusion_width = 0.8
+first_layer_height = 0.24
+first_layer_speed = 50%
+gap_fill_speed = 10
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.5
+infill_first = 0
+infill_only_where_needed = 0
+infill_speed = 30
+layer_height = 0.24
+min_skirt_length = 0
+notes = 
+only_retract_when_crossing_perimeters = 0
+output_filename_format = [input_filename_base].gcode
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.5
+perimeter_speed = 30
+perimeters = 2
+post_process = 
+raft_layers = 0
+resolution = 0
+skirt_distance = 4
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 26
+solid_fill_pattern = rectilinear
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extrusion_width = 0.5
+solid_infill_speed = 30
+spiral_vase = 0
+support_material = 0
+support_material_angle = 0
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_layers = 0
+support_material_interface_spacing = 0
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_speed = 20
+support_material_threshold = 0
+threads = 2
+top_infill_extrusion_width = 0.5
+top_solid_infill_speed = 30
+top_solid_layers = 3
+travel_speed = 100
+
+[printer:Ormerod-0.5]
+bed_shape = 0x0,200x0,200x200,0x200
+end_gcode = G1 X2 Y190; park the machine\nM1\n
+extruder_offset = 0x0
+gcode_flavor = reprap
+layer_gcode = 
+nozzle_diameter = 0.5
+retract_before_travel = 2
+retract_layer_change = 1
+retract_length = 2.4
+retract_length_toolchange = 10
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 30
+start_gcode = T1\n
+toolchange_gcode = 
+use_relative_e_distances = 1
+vibration_limit = 0
+wipe = 0
+z_offset = 0
+
+[settings]
+autocenter = 1
+mode = expert
+
+[simple]
+avoid_crossing_perimeters = 1
+bed_shape = 0x0,200x0,200x200,0x200
+bed_temperature = 55
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_fan_speed = 100
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_width = 0
+complete_objects = 0
+cooling = 1
+default_acceleration = 0
+disable_fan_first_layers = 1
+duplicate_distance = 6
+end_gcode = M104 S0 ; turn off temperature\nM140 S0\nG28 X0  ; home X axis\nM84     ; disable motors
+external_perimeter_speed = 70%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extruder_offset = 0x0
+extrusion_axis = E
+extrusion_multiplier = 1
+extrusion_width = 0
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_diameter = 1.75
+fill_angle = 45
+fill_density = 40%
+fill_pattern = honeycomb
+first_layer_bed_temperature = 55
+first_layer_extrusion_width = 200%
+first_layer_height = 0.3
+first_layer_speed = 30%
+first_layer_temperature = 205
+g0 = 0
+gap_fill_speed = 20
+gcode_arcs = 0
+gcode_comments = 0
+gcode_flavor = reprap
+infill_acceleration = 0
+infill_every_layers = 10
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_speed = 60
+layer_gcode = 
+layer_height = 0.24
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 10
+min_skirt_length = 0
+notes = 
+nozzle_diameter = 0.3
+only_retract_when_crossing_perimeters = 1
+output_filename_format = [input_filename_base].gcode
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 30
+perimeters = 2
+post_process = 
+raft_layers = 0
+resolution = 0
+retract_before_travel = 2
+retract_layer_change = 1
+retract_length = 1
+retract_length_toolchange = 10
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 30
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+slowdown_below_layer_time = 30
+small_perimeter_speed = 30
+solid_fill_pattern = rectilinear
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extrusion_width = 0
+solid_infill_speed = 60
+start_gcode = G28 ; home all axes\nG1 Z5 F200 ; lift nozzle
+support_material = 0
+support_material_angle = 0
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_layers = 0
+support_material_interface_spacing = 0
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_speed = 60
+support_material_threshold = 0
+temperature = 205
+threads = 2
+toolchange_gcode = 
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 50
+top_solid_layers = 3
+travel_speed = 130
+use_relative_e_distances = 0
+vibration_limit = 0
+z_offset = 0