Drosera-Network

In this Guide, we contribute to Drosera testnet by:

Installing the CLI
Setting up a vulnerable contract
Deploying a Trap on testnet
Connecting an operator to the Trap

Recommended System Requirements

2 CPU Cores
4 GB RAM
20 GB Disk Space
Get started with a low-budget VPS for as low as $5! Purchase here
Create your own Ethereum Holesky RPC in Alchemy or QuickNode.

Install Dependecies

sudo apt-get update && sudo apt-get upgrade -y

sudo apt install curl ufw iptables build-essential git wget lz4 jq make gcc nano automake autoconf tmux htop nvme-cli libgbm1 pkg-config libssl-dev libleveldb-dev tar clang bsdmainutils ncdu unzip libleveldb-dev  -y

Install Docker

sudo apt update -y && sudo apt upgrade -y
for pkg in docker.io docker-doc docker-compose podman-docker containerd runc; do sudo apt-get remove $pkg; done

sudo apt-get update
sudo apt-get install ca-certificates curl gnupg
sudo install -m 0755 -d /etc/apt/keyrings
curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo gpg --dearmor -o /etc/apt/keyrings/docker.gpg
sudo chmod a+r /etc/apt/keyrings/docker.gpg

echo \
  "deb [arch="$(dpkg --print-architecture)" signed-by=/etc/apt/keyrings/docker.gpg] https://download.docker.com/linux/ubuntu \
  "$(. /etc/os-release && echo "$VERSION_CODENAME")" stable" | \
  sudo tee /etc/apt/sources.list.d/docker.list > /dev/null

sudo apt update -y && sudo apt upgrade -y

sudo apt-get install docker-ce docker-ce-cli containerd.io docker-buildx-plugin docker-compose-plugin

# Test Docker
sudo docker run hello-world

Trap Setup

1. Configure Enviorments

Drosera CLI:

curl -L https://app.drosera.io/install | bash

source /root/.bashrc

droseraup

Foundry CLI:

curl -L https://foundry.paradigm.xyz | bash

source /root/.bashrc

foundryup

Bun:

curl -fsSL https://bun.sh/install | bash

source /root/.bashrc

2. Deploy Contract & Trap

mkdir my-drosera-trap

cd my-drosera-trap

Replace Github_Email & Github_Username:

git config --global user.email "Github_Email"
git config --global user.name "Github_Username"

Initialize Trap:

forge init -t drosera-network/trap-foundry-template

Compile Trap:

curl -fsSL https://bun.sh/install | bash

source /root/.bashrc

bun install

forge build

skip warnings!

Deploy Trap:

DROSERA_PRIVATE_KEY=xxx drosera apply

Replace xxx with your EVM wallet privatekey (Ensure it's funded with Holesky ETH)
Enter the command, when prompted, write ofc and press Enter.

Existing Users: If you've deployed a trap with your wallet previously, then you need to add your trap address to drosera.toml file, by adding this line: address = "TRAP_ADDRESS" in the bottom.
- Ensure you replace TRAP_ADDRESS with your own trap address.
- If you don't know how to get your trap address, Follow this step.
- Finally, as an existing user, Ensure you filled out drosera.toml bottom lines like this:
```
whitelist = ["Operator1_Address","Operator2_Address"]
address = "TRAP_ADDRESS"
```
- After modifying your drosera.toml, re-apply your trap configuration by executing this command: DROSERA_PRIVATE_KEY=xxx drosera apply

🚨 Error: You may get several errors (.eg #429) due to rpc issues, to fix, you can enter bellow command by adding --eth-rpc-url

DROSERA_PRIVATE_KEY=xxx drosera apply --eth-rpc-url RPC

Replace RPC with your own Ethereum Holesky rpc by registering and creating one in Alchemy or QuickNode.

3. Check Trap in Dashboard

1- Connect your Drosera EVM wallet: https://app.drosera.io/

2- Click on Traps Owned to see your deployed Traps OR search your Trap address.

4. Bloom Boost Trap

Open your Trap on Dashboard and Click on Send Bloom Boost and deposit some Holesky ETH on it.

5. Fetch Blocks

drosera dryrun

Operator Setup

1. Whitelist Your Operator

1- Edit Trap configuration:

cd my-drosera-trap
nano drosera.toml

Add the following codes at the bottom of drosera.toml:

private_trap = true
whitelist = ["Operator_Address"]

Replace Operator_Address with your EVM wallet Public Address between " " symbols
Your Public Address is your Operator_Address.

2- Update Trap Configuration:

DROSERA_PRIVATE_KEY=xxx drosera apply

Replace xxx with your EVM wallet privatekey
If RPC issue, use DROSERA_PRIVATE_KEY=xxx drosera apply --eth-rpc-url RPC and replace RPC with your own.

Your Trap should be private now with your operator address whitelisted internally.

2. Operator CLI

cd ~

# Download
curl -LO https://github.com/drosera-network/releases/releases/download/v1.17.2/drosera-operator-v1.17.2-x86_64-unknown-linux-gnu.tar.gz

# Install
tar -xvf drosera-operator-v1.17.2-x86_64-unknown-linux-gnu.tar.gz

Currently the Operator CLI version is v1.17.2. Verify the latest version here
You have to get the link of drosera-operator-v1.x.x-x86_64-unknown-linux-gnu.tar.gz

Test the CLI with ./drosera-operator --version to verify it's working.

# Check version
./drosera-operator --version

# Move path to run it globally
sudo cp drosera-operator /usr/bin

# Check if it is working
drosera-operator

3. Install Docker image

docker pull ghcr.io/drosera-network/drosera-operator:latest

4. Register Operator

drosera-operator register --eth-rpc-url https://ethereum-holesky-rpc.publicnode.com --eth-private-key PV_KEY

Replace PV_KEY with your Drosera EVM privatekey. We use the same wallet as our trap wallet.

5. Open Ports

# Enable firewall
sudo ufw allow ssh
sudo ufw allow 22
sudo ufw enable

# Allow Drosera ports
sudo ufw allow 31313/tcp
sudo ufw allow 31314/tcp

6. Install & Run Operator

Choose one Installation Method:

Method 1: Install using Docker
Method 2: Install using SystemD

Method 1: Docker

6-1-1: Configure Docker

Make sure you have installed Docker in Dependecies step.

If you are currently running via old systemd method, stop it:

sudo systemctl stop drosera
sudo systemctl disable drosera

git clone https://github.com/0xmoei/Drosera-Network

cd Drosera-Network

cp .env.example .env

Edit .env file:

nano .env

Replace your_evm_private_key and your_vps_public_ip
To save: CTRL+X, Y & ENTER.

Edit docker-compose.yaml file:

nano docker-compose.yaml

Replace default --eth-rpc-url to your private Alchemy or QuickNode Ethereum Holesky RPCs.
To save: CTRL+X, Y & ENTER.

6-1-2: Run Operator

docker compose up -d

6-1-3: Check health

docker logs -f drosera-node

No problem if you are receiveing WARN drosera_services::network::service: Failed to gossip message: InsufficientPeers

6-1-4: Optional Docker commands

# Stop node
cd Drosera-Network
docker compose down -v

# Restart node
cd Drosera-Network
docker compose up -d

Now running your node using Docker, you can Jump to step 7.

Method 2: SystemD

6-2-1: Configure SystemD service file

Enter this command in the terminal, But first replace:

PV_KEY with your privatekey
VPS_IP with your solid vps IP (without anything else)
Replace default https://ethereum-holesky-rpc.publicnode.com to your private Alchemy or QuickNode Ethereum Holesky RPCs.

sudo tee /etc/systemd/system/drosera.service > /dev/null <<EOF
[Unit]
Description=drosera node service
After=network-online.target

[Service]
User=$USER
Restart=always
RestartSec=15
LimitNOFILE=65535
ExecStart=$(which drosera-operator) node --db-file-path $HOME/.drosera.db --network-p2p-port 31313 --server-port 31314 \
    --eth-rpc-url https://ethereum-holesky-rpc.publicnode.com \
    --eth-backup-rpc-url https://1rpc.io/holesky \
    --drosera-address 0xea08f7d533C2b9A62F40D5326214f39a8E3A32F8 \
    --eth-private-key PV_KEY \
    --listen-address 0.0.0.0 \
    --network-external-p2p-address VPS_IP \
    --disable-dnr-confirmation true

[Install]
WantedBy=multi-user.target
EOF

6-2-2: Run Operator

# reload systemd
sudo systemctl daemon-reload
sudo systemctl enable drosera

# start systemd
sudo systemctl start drosera

6-2-3: Check Node Health

journalctl -u drosera.service -f

!! No problem if you are receiveing WARN drosera_services::network::service: Failed to gossip message: InsufficientPeers

6-2-4: Optional commands

# Stop node
sudo systemctl stop drosera

# Restart node
sudo systemctl restart drosera

Now running your node using `SystemD`, you can Jump to step 7.

7. Opt-in Trap

In the dashboard., Click on Opti in to connect your operator to the Trap

8. Check Node Liveness

Your node will start producing greeen blocks in the dashboard

Run 2nd Operators

Let's run a 2nd operator on your Trap using Docker:

1- Stop SystemD if ruuning operator using it.

sudo systemctl stop drosera
sudo systemctl disable drosera

2- Whitelist Your 2nd Operator

1- Create a new EVM wallet, Fund it with Holeksy ETH and write down its Privatekey (2nd_Operator_Privatekey) & PublicAddress (2nd_Operator_Address).

2- Edit Trap Configuration:

cd ~/my-drosera-trap
nano drosera.toml

Edit the following codes at the bottom of drosera.toml:

private_trap = true
whitelist = ["1st_Operator_Address","2nd_Operator_Address"]

Replace 1st_Operator_Address & 2nd_Operator_Address with your Operators EVM wallet Public Addresses between " " symbols.

3- Update Trap Configuration:

DROSERA_PRIVATE_KEY=xxx drosera apply

Replace xxx with your Trap EVM wallet privatekey.
If RPC issue, use DROSERA_PRIVATE_KEY=xxx drosera apply --eth-rpc-url RPC and replace RPC with your own.

Your 2nd_Operator_Address is now added to the whitelist in the dashboard of your Trap.

3- Register 2nd Operator

drosera-operator register --eth-rpc-url https://ethereum-holesky-rpc.publicnode.com --eth-private-key 2nd_Operator_Privatekey

Replace 2nd_Operator_Privatekey with your 2nd Operator Privatekey.

4- Open Ports

sudo ufw allow 31315/tcp
sudo ufw allow 31316/tcp

5- Edit `docker-compose.yaml`

cd Drosera-Network

nano docker-compose.yaml

Replace the content of the file with the following codes:

version: '3'
services:
  drosera1:
    image: ghcr.io/drosera-network/drosera-operator:latest
    container_name: drosera-node1
    network_mode: host
    volumes:
      - drosera_data1:/data
    command: node --db-file-path /data/drosera.db --network-p2p-port 31313 --server-port 31314 --eth-rpc-url RPC_URL_1 --eth-backup-rpc-url https://holesky.drpc.org --drosera-address 0xea08f7d533C2b9A62F40D5326214f39a8E3A32F8 --eth-private-key ${ETH_PRIVATE_KEY} --listen-address 0.0.0.0 --network-external-p2p-address ${VPS_IP} --disable-dnr-confirmation true
    restart: always

  drosera2:
    image: ghcr.io/drosera-network/drosera-operator:latest
    container_name: drosera-node2
    network_mode: host
    volumes:
      - drosera_data2:/data
    command: node --db-file-path /data/drosera.db --network-p2p-port 31315 --server-port 31316 --eth-rpc-url RPC_URL_2 --eth-backup-rpc-url https://holesky.drpc.org --drosera-address 0xea08f7d533C2b9A62F40D5326214f39a8E3A32F8 --eth-private-key ${ETH_PRIVATE_KEY2} --listen-address 0.0.0.0 --network-external-p2p-address ${VPS_IP} --disable-dnr-confirmation true
    restart: always

volumes:
  drosera_data1:
  drosera_data2:

Replace RPC_URL_1 & RPC_URL_2 with your own Ethereum Holesky RPC, You can use Alchemy or QuickNode or even a reliable public rpc of holesky network to create Ethereum Holesky RPC.
You can use same RPCs for both RPC_URL_1 & RPC_URL_2.
To save: CTRL+X, Y & ENTER

5- Edit `.env`

nano .env

Replace the content of the file with the following codes:

ETH_PRIVATE_KEY=
ETH_PRIVATE_KEY2=
VPS_IP=

Enter a value for ETH_PRIVATE_KEY & ETH_PRIVATE_KEY2 (Operators Private key) & VPS_IP.
To save: CTRL+X, Y & ENTER

6- Run Operators

Stop old docker node:

docker compose down -v
docker stop drosera-node
docker rm drosera-node

Run Operators:

docker compose up -d

7- Opt-in 2nd Operator

Method 1: Login with your 2nd Operator wallet in Dashboard, and Opt-in to your Trap

Method 2: via CLI

drosera-operator optin --eth-rpc-url https://ethereum-holesky-rpc.publicnode.com --eth-private-key 2nd_Operator_Privatekey --trap-config-address Trap_Address

Replace 2nd_Operator_Privatekey & Trap_Address

8- Restart Operators

cd ~/Droseta-Network
docker compose up -d

You will get Green Blocks after a while!

9- Useful Commands (If Running Two Operators)

Make sure you are in Operators directory:

cd ~/Drosera-Network

Restart Operators:

docker compose up -d
# OR
docker compose restart

Restart Operators seprately:

docker compose up -d drosera1
docker compose up -d drosera2
# OR
docker compose restart drosera1
docker compose restart drosera2

Kill Operators:

docker compose down -v

Troubleshooting Erros

⬜️⬜️ White Blocks for an Operator

Use this docker-compose.yaml file instead.

version: '3'
services:
  drosera1:
    image: ghcr.io/drosera-network/drosera-operator:latest
    container_name: drosera-node1
    network_mode: host
    volumes:
      - drosera_data1:/data
    command: node --db-file-path /data/drosera.db --network-p2p-port 31313 --server-port 31314 --eth-rpc-url RPC_URL_1 --eth-backup-rpc-url https://holesky.drpc.org --drosera-address 0xea08f7d533C2b9A62F40D5326214f39a8E3A32F8 --eth-private-key ${ETH_PRIVATE_KEY} --listen-address 0.0.0.0 --network-external-p2p-address ${VPS_IP} --disable-dnr-confirmation true
    restart: always

  drosera2:
    image: ghcr.io/drosera-network/drosera-operator:latest
    container_name: drosera-node2
    network_mode: host
    volumes:
      - drosera_data2:/data
    command: node --db-file-path /data/drosera.db --network-p2p-port 31315 --server-port 31316 --eth-rpc-url RPC_URL_2 --eth-backup-rpc-url https://holesky.drpc.org --drosera-address 0xea08f7d533C2b9A62F40D5326214f39a8E3A32F8 --eth-private-key ${ETH_PRIVATE_KEY2} --listen-address 0.0.0.0 --network-external-p2p-address ${VPS_IP} --disable-dnr-confirmation true
    restart: always

volumes:
  drosera_data1:
  drosera_data2:

Replace RPC_URL_1 & RPC_URL_2 with your own Ethereum Holesky RPC, You can use Alchemy or QuickNode to create Ethereum Holesky RPC.
You can use same RPCs for both RPC_URL_1 & RPC_URL_2.
To save: CTRL+X, Y & ENTER

Re-run your Operators:

cd ~/Drosera-Network

docker compose down -v

docker compose up -d

Now Give it a few minutes. Boom!

🚨 Error: Apply config failed

You may get Apply config failed due to several issues:
You need to verify if you have deployed any trap before.
In your drosera.toml file, Verify that you have a line showing your trap's address as address = "0x..."

If you don't see your trap's address as address = "0x..." line, Then follow the steps:

Connect to the Dashboard using same account you used to deploy your trap:

Select the “Traps Owned” button to display only traps that your account owns:

Click on the trap to go to the trap’s page:

On the trap’s page, click on the “Trap Config” address hyperlink. This will open a page to holesky etherscan.

Click the button to copy the contract’s address:

Paste that address as the value for the corresponding trap’s address field in your drosera.toml file:

Name		Name	Last commit message	Last commit date
Latest commit History 89 Commits
.env.example		.env.example
README.md		README.md
docker-compose.yaml		docker-compose.yaml
update-old-nodes.md		update-old-nodes.md

pvsairam/Drosera-Network

Folders and files

Latest commit

History

Repository files navigation