BigDelta-3D-printer

This projects was based on the smaller Delta 3D printer (https://github.com/marcosfg/Delta-3D-printer). The main updates are:

- Bigger Build plate. This design should allow to print within a 300mm diameter build plate when enclosed and nearly 400mm when opened.
- Vertical tower upgraded with 20x60mm aluminum profile to increase rigidity and allow the fixation of panels to enclose the build volume
- Fixations on the extremities of the horizontal aluminum provide better alignment and higher rigidity

Printer specifications:

This printer was designs with the following specs:

- Nema17 400deg/rotation stepper motors
- GT2 belts and pulleys
- 

Non printed parts:

3 x nema17 motor 3 x GT2 pulley 6 x F623z bearing 1 x nema17 planetary geared extruder with 5.18:1 ration 3 x 20x60x750mm aluminium profile (http://www.motedis.com/shop/Slot-profiles/Profile-20-I-Type-slot-5/Profile-20x60-I-Type-slot-5::499.html) 9 x 20x20x350mm aluminium profile (http://www.motedis.com/shop/Slot-profiles/Profile-20-I-Type-slot-5/Profile-20x20-I-Typ-slot-5::1076.html)

Printed parts needed to Build the printer:

3 x Bottom frame corners (FrameBottomV2.STL or FrameBottomV2_BRIM.STL) 3 x Top frame corners (FrameTop.STL or FrameTop_BRIM.STL) 3 x Carriage adaptors for IGUS guides (Carriage.STL) 1 x Effector (Effector.STL) 6 x Supports for F623zz (SuporteF623zz.STL) 1 x Extruder for planetary geared motor with 5.18:1 ratio (Extruder.STL)

Optional parts:

• Motor ventilation 3 x printed ventilation motor cover (MotorCover.STL) 6 x 40mm fan

• Spool holder at the top of the printer: 1 x printed bottom part (SuporteRolo_Inf.STL) 1 x printed top part (SuporteRolo_Sup.STL) 3 x printed arms (SuporteRolo_Braco.STL) 3 x 625ZZ beatings 3 x 20x20 aluminium profiles