AetherSense: Smart Air Quality Monitoring System

AetherSense is an IoT-based air quality monitoring system that measures temperature, humidity, and air quality using an Arduino Uno and sensors like DHT11 and MQ135. The system logs data to a CSV file and provides real-time visualization of air quality metrics.

---

Features

• Real-Time Monitoring: Measures temperature, humidity, and air quality (PPM and AQI).
• Data Logging: Logs sensor data to a CSV file for analysis.
• Visualization: Generates graphs to visualize trends in air quality metrics.
• Alerts: Uses LEDs and a buzzer to indicate air quality levels (Good, Moderate, Unhealthy).

---

Hardware Requirements

• Arduino Uno
• DHT11 Sensor (Temperature and Humidity)
• MQ135 Sensor (Air Quality)
• 16x2 LCD with I2C
• LEDs (Green, Yellow, Red)
• Buzzer
• Breadboard and Jumper Wires

---

Software Requirements

• Arduino IDE
• Python 3.x
• Libraries:
  • pyserial (for data logging)
  • pandas (for data processing)
  • matplotlib (for visualization)

---

Setup Instructions

1. Arduino Setup

1. Connect the hardware components as per the circuit diagram.
2. Upload the AetherSense.ino sketch to the Arduino Uno using the Arduino IDE.
3. Open the Serial Monitor to verify that the Arduino is sending data.

2. Python Setup

1. Install the required Python libraries:

   pip install pyserial pandas matplotlib
   

Bam, rock and roll!