TM1668/1638 display driver component for esp-idf

Installation

idf.py add-dependency "larryli/tm1668"

Getting Started

New tm1668 bus and add device

#include "tm1668.h"

const tm1668_bus_config_t tm1668_bus_config = {
    .clk_io_num = CLK_IO_PIN,
    .dio_io_num = DIO_IO_PIN,
    .flags.enable_internal_pullup = true,
};
tm1668_bus_handle_t bus_handle;

tm1668_new_bus(&tm1668_bus_config, &bus_handle);

const tm1668_device_config_t dev_cfg = {
    .stb_io_num = STB_IO_PIN,
    .flags.enable_internal_pullup = true,
};

tm1668_dev_handle_t tm1668_handle;
tm1668_bus_add_device(bus_handle, &dev_cfg, &tm1668_handle);

New tm1668 device without bus

const tm1668_config_t tm1668_config = {
    .clk_io_num = CLK_IO_PIN,
    .dio_io_num = DIO_IO_PIN,
    .stb_io_num = STB_IO_PIN,
    .flags.enable_internal_pullup = true,
};
tm1668_dev_handle_t tm1668_handle;

tm1668_new_device(&tm1668_config, &tm1668_handle);

Display mode setting

tm1668_set_mode(tm1668_handle, TM1668_MODE_7x10);

Set the display brightness and on/off

tm1668_set_pulse(tm1668_handle, TM1668_PULSE_WIDTH_14);
tm1668_display(tm1668_handle, true);

Display on address auto increase mode

uint8_t buf[TM1668_DISPLAY_SIZE] = {0xFF};
tm1668_display_auto(tm1668_handle, 0, buf, sizeof(buf));

Display on fixed address mode

tm1668_display_fixed(tm1668_handle, 0, 0xFF);

Read time sequence of the key

uint8_t key[TM1668_KEY_SIZE];
tm1668_read_key(tm1668_handle, key, sizeof(key));