CANable Pro USB-C

USB to CAN adapter

The CANable Pro from Lab4450 is a variant of CANable, that is heavily based on MKS Canable Pro that is a clone from Canable Pro from Protofusion that is also a hardware clone of Eric Evenchick's CANtact project.
Eric also developed cantact-app, canard, and most of the other awesome tools that work with the CANable and CANtact devices.

Features:

• stm32f072c8t6 frequency up to 48Mhz
• ADM3053BRWZ, highly integrated fully isolated chip with 2.5KV rms signal and power isolation function it provides isolation between Input CANL and CANH signal to RX,TX signal, So this IC uses 2 seprate GND.
• USB-C
• 2 mounting holes for m3 screws
• 250ma and integrated 1.2A fuse
• flashed with candlelight

Sources and credits:

• https://github.com/makerbase-mks/CANable-MKS
• https://openlightlabs.com/collections/frontpage/products/canable-pro-isolated-usb-to-can-adapter
• https://github.com/linklayer/cantact-hw
• https://github.com/karlyamashita/CANable_USB_CAN