_______                     ________        __
|       |.-----.-----.-----.|  |  |  |.----.|  |_
|   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
|_______||   __|_____|__|__||________||__|  |____|
         |__| W I R E L E S S   F R E E D O M
-----------------------------------------------------

OpenWrt Stable 1907 with lean's package

This is the stable buildsystem for the OpenWrt Linux distribution.

这是 OpenWrt Linux 发行版 稳定版本编译系统。

All released version of my project is used for more than a week, and released after the test is stable.

本项目版本均为使用一周以上，测试稳定后发布。

This project can use Github Actions to achieve automatic compilation. Copy the openwrt-ci-v2.yml in the directory .github /workflows/ and rename then modify the content to your own configuration. Note: In order to successfully synchronize the changes after the fork, please do not make any modifications to the original openwrt-ci-v2.yml, otherwise it will cause errors in the synchronization upstream.

本项目可利用 Github Actions 实现自动编译。拷贝目录 .github/workflows/ 下的 openwrt-ci-v2.yml 重命名并修改内容为自己的配置即可。注意事项：为了顺利同步Fork 后的更改内容，请不要对原版 openwrt-ci-v2.yml 做任何修改，否则会导致同步上游出错。

To build your own firmware you need a Linux, BSD or MacOS system (case sensitive filesystem required). Cygwin and Windows linux subsystem are unsupported because of the lack of a case sensitive file system.

要构建属于您自己的固件，您需要一个 Linux ，BSD 或 MacOS 系统（需要区分大小写的文件系统）。 由于缺少区分大小写的文件系统，因此不支持 Cygwin 和 Windows linux subsystem。

You need gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers installed.

您需要安装 gcc, binutils, bzip2，flex, python, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev, libc.

1. Run ./scripts/feeds update -a to obtain all the latest package definitions defined in feeds.conf / feeds.conf.default

   运行./scripts/feeds update -a获取feeds.conf / feeds.conf.default中定义的所有最新软件包定义。

2. Run ./scripts/feeds install -a to install symlinks for all obtained packages into package/feeds/

   运行./scripts/feeds install -a将所有获得的软件包的符号链接安装到package/feeds/中。

3. Run make menuconfig to select your preferred configuration for the toolchain, target system & firmware packages.

   运行 make menuconfig 为工具链，目标系统和固件包选择首选配置。

4. Run make download -j8 && make -j$(nproc) || make -j1 V=s to build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the Linux kernel & all chosen applications for your target system.

   运行make download -j8 && make -j$(nproc) || make -j1 V=s来构建固件。 这将下载所有源代码，构建交叉编译工具链，然后交叉编译目标系统的Linux内核和所有选定的应用程序。

Sunshine! Your OpenWrt Community

Thanks to Lean's OpenWrt source