Description

This project is an MQTT source for Exosite's ExoSense which uses ExoEdge.

With this source installed on a gateway and the ExoEdge daemon (edged) running, any MQTT topic can be subscribed to by specifying it in the ExoSense Configuration object.

This becomes especially useful in systems where data is published to a local MQTT broker, such as the Multitech LoRaWAN system. In this system, LoRa nodes publish data to MQTT topics on the local mosquitto daemon (e.g. lora/<mac-address>/down).

The basic design behind this "source" is that each channel is effectively a different topic on the local broker.

Install

From Source

python setup.py install

From Wheel

The wheel for this hasn't been published yet.

$ ./build.sh release
# lots of output...
$ pip install dist/*.whl

ExoEdge Configuration

In order to start using this MQTT subscriber source, start the edged daemon with your desired parameters. For more information on edged configuration, visit ExoEdge on PyPi.

Example

edged -H mqtt://f5330e5s8cho0000.m2.exosite.io/ -s mqtt-subscriber-1 -i mqtt-subscriber-1.ini go

ExoSense Configuration

Below is an example config_io settings that illustrates how mqtt devices or applications cat publish data into ExoEdge channels. Each channel is mapped directly to an MQTT broker and subscription on the network (e.g. localhost->``device/temp``, 192.168.254.2->``device/pressure``). The topic field can use wildcard # and +

{
  "channels": {
    "topic0": {
      "description": "Subscription to MQTT topic <topic> on gateway.",
      "display_name": "topic0",
      "properties": {
        "data_type": "STRING",
        "max": null,
        "min": null,
        "precision": null
      },
      "protocol_config": {
        "app_specific_config": {
          "ip_address": "localhost",
          "port": 1883,
          "topic": "topic0/#"
        },
        "application": "MQTTSubscriber",
        "report_on_change": false,
        "report_rate": 1000,
        "sample_rate": 1000
      }
    },
    "topic1": {
      "description": "Subscription to MQTT topic <topic> on gateway.",
      "display_name": "topic1",
      "properties": {
        "data_type": "STRING",
        "max": null,
        "min": null,
        "precision": null
      },
      "protocol_config": {
        "app_specific_config": {
          "ip_address": "localhost",
          "port": 1883,
          "topic": "topic1"
        },
        "application": "MQTTSubscriber",
        "report_on_change": false,
        "report_rate": 1000,
        "sample_rate": 1000
      }
    }
  }
}

Test

Using the config_io above, use the following 3 terminals to test multiple topics on the same broker.

TODO: Test multiple brokers at differenct ``IP:PORT``s.

Terminal 1

mosquitto -v

Terminal 2

edged -i edged.ini go

Terminal 3

mosquitto_pub -h localhost -t topic0/zero -m "hello topic0"

mosquitto_pub -h localhost -t topic1 -m "hello topic1"