3.4.0

Remove Scanner Plugin

3.3.4

Replace call to tc_max.g to maxoffset.g
Add missing M500 call on Set To Current button

3.3.3

Added additional priming amount field to ToolPriming plugin.
global t#primeextra variables are created for each FFF tool in the toolpriming.g

3.3.1

Manually entered tool offsets will now call TC_max.g like the buttons.

Diabase H-Series Web Control Version 3.3.0-rc2

Corrected a G10 call in the Offset plugin when pressing 'Set To Current' button.
Addressed a null reference issue when TurretLock endstop is not configured
TC_max.g will execute after changing a tool offset.

3.2.2

Update to Diabase H-Series Web Control

• Add Tool Priming tab to control priming behavior with M207
• Allow priming of tools with button press from Tool Priming tab
• Add "Probe ready" indicator on Offsets tab
• Add reverse spindle control from Tool Offsets section (only in CNC mode)
• Require probe ready before G29 call

Diabase H-Series Web Control Version 3.2.0

The first official release of Diabase H-Series-Web-Control based on DuetWebControl 3.2.0.

Compatible versions:

• DuetSoftwareFramework 3.2.0
• RepRapFirmware 2 or newer (1.2x may work but untested)

Changed behaviour:

• Apart from the tool fan the first three fans are displayed by default
• Reduced extrusion slider step size from 5% to 1%

Bug fixes:

• When an error occurred during a plugin installation, the upload button became unusable
• New code editor was always disabled in Chrome-based browsers due to touchscreen detection
• Standard editor always displayed end of the file
• Sometimes the heightmap could not be shown and only a black frame was displayed
  Please check out the WHATS_NEW file for further changes since v3.1.1.

3.2 Firmware and DWC

Numerous changes since last firmware release. See main DWC and Firmware for for complete details.

New features:

1. Dedicated Rotary Axes Screen
2. Selectable bed levelling routine for different physical machine configurations
3. Improved calibration routines utilizing the "Touchoff cup" for X-Y offsets
4. Plugin-based configurability in web control
5. Pendant is upgradeable from web control
6. All heater definitions are within tcreate#.g files

Warning:
These files are for the following configuration:

1. Two spindles (T1, T2) and three print heads (T3, T4, T5)
2. Dry cabinet
3. Heated bed
4. Motor-driven cleaning station

If your configuration differs from this one, contact Diabase Support to customize these files.

Installation:
Upload all files to the machine via the web control, as is described here
You should be promted to update the machine firmware. To update the pendant, send M997 S4

See the online H-Series Manual for usage details.