Home

Welcome to the stonerlights wiki!

I want a working rxlamp, what do I do?

1. Aquire the parts for the hardware
2. Download the SVG's and etch your board
3. Assemble the board
4. Compile my fork of stm32flash
5. Connect the rxlamp to a 3v3 or 5v0 logic level UART
6. Download the firmware for rxlamp
7. run stm32flash /dev/YOUR-SERIAL-PORT -RRTS -BDTR -w rxlamp.hex

Quick info - Hardware

• rxlamp

Quick info - Software

• rxlamp firmware
• rxlamp protocol