1.23

• Added the ability to manage stock firmware from Toolkit (change pools, password, reboot the device, enable/disable blink mode). Pools can now be configured for both GMiner and Antminer firmware simultaneously.
• Added the ability to manage GMiner firmware via the Antminer API (full support for BTC Tools, etc.). The Antminer API protocol is outdated and insecure, to activate this feature, you must enable it in the "System" section.
• Improved GMiner API security
• Improved compatibility with hydro models
• Improved network scanning in Toolkit, and added an "offline" status for devices with lost connection.

Note: For compatibility with the Antminer API, the password will be reset when updating to version 1.23. The default password is "root."

1.22

• Added support for S21+ Hyd (H6HB70701, H6HB70702, H6HB70704), S21e Hyd (H6HB70801, H6HB70802)
• Added support for APW11G0 power supply
• Possibility to disable hash boards cooling stage
• Improved miner stability

1.20

• Added support for Hiveon ASIC Hub
• Added coloring of heatmap according to the temperature of the chip.
• Added use of the device serial number in the status.
• Added support for APW111721b and APW111721c power supplies.
• Added support for T19 Pro Hyd (HHB56702)
• Added support for S19 Pro Hyd (HHB42602, HHB42701, HHB42711, TH401)
• Added support for S19 Pro+ Hyd (HHB42601, HHB42631)
• Added support for S19 XP Hyd (HHB56601, HHB56611, HHB56613, HHB56701)
• Added support for S19 XP+ Hyd (HHB68701, HHB68703, HHB68704, H6HB68702)
• Added Support for U3S19XP+H (H1HB68601)
• Added support for S19e XP Hyd(H6HB56702)
• Added support for U3S19EXPH(H1HB56703)
• Added support for S21 Hyd (HHB68501, HHB68502, HHB68503, HHB68504, HHB68505, HHB68601, HHB68602)
• Added support for S21 Pro Hyd (H6HB70601)
• Added support for S21e XP Hyd (H6HB70602)
• Added support for S21 XP Hyd (H6HB70501)
• Added support for U3S21EXPH (H1HB70601)

1.19

• extends the voltage limits for power supplies (allows to select higher profiles for autotuning)
• added S19k Pro submodels: BHB56906, BHB56907
• added an option to set the time zone (correct time in downloaded logs)

1.18

• added chips heatmap for S21 Pro and S21 XP
• added support for the S19 XP+ (BHB68707, BHB68709)
• added support for the S21 XP submodel (A3HB70503)
• added display of ambient temperature for Amlogic control board (S21+, S21 Pro, S21 XP)
• improved compatibility with the APW121215E power supply
• added toolkit statistics export to a .CSV file
• added display of error/warning in the web interface page header
• added support of older OS for Toolkit (Windows 7 without Direct3D 12)
• decreased Toolkit executable size by 10Mb, current Toolkit size is 37Mb (offline installer with embedded firmware for all control boards)

1.17

Toolkit:

• Added display of hashboard status, allows viewing errors by hashboard
• Added the ability to enable/disable miner search mode

Miner:

• Improved compatibility with power supplies
• Added backup saving for EEPROM, allowing the miner to start even if there are EEPROM issues
• Improved network connection failure handling logic

Web Interface:

• When switching performance profiles in manual temperature tuning mode, the selected temperature tuner settings are saved

1.16

• improved fan control algorithm in auto mode
• added the ability to configure the following options in the Toolkit: quiet fan mode, do not stop mining when the internet connection is lost
• improved support for S21 Pro and S21 XP devices

1.15

• added quiet fan mode (fan speed 50% while hash board cooling)
• added option to allow mining without internet (allows keep ASIC at working temperature)
• improved compatibility with mining pools (fixed bugs with headframe.io pool)

1.14

• added S21 Pro support (A3HB70601, A3HB70602, A3HB70603)
• added S21 XP support (A3HB70501, A3HB70502)
• added Cvitek control board support, after reboot control board rollback to stock firmware, keep Toolkit open to launch GMiner firmware after reboot

1.13

• Added the ability to install GMiner on Bitmain stock firmware from late February 2024, including firmware from 2025 (no longer required to downgrade the stock device to an older firmware version)
• Improved logic for returning from a backup pool to the main
• Added S21+ submodels support: A3HB70702, A3HB70703