build(deps): bump redb from 2.6.0 to 2.6.3

[dependabot]

Bumps redb from 2.6.0 to 2.6.3.

Release notes

Sourced from redb's releases.

2.6.3

• Fix correctness issue with range(), extract_from_if(), and retain_in(). If a RangeBounds with start > end was passed as an argument and start and end keys were stored in different internal pages in the database (i.e. a sufficient condition is that more than 4KiB of key-value pairs were between the two keys) then these methods would perform as if the argument had been start..

2.6.2

• Forward compatibility improvement which makes the file format more flexible to support a potential future optimization

2.6.1

• Fix a forward compatibility issue which caused a crash when opening databases created with redb 3.x. Note that opening 3.x databases with redb 2.x is not generally supported and only works in certain situations.

Changelog

Sourced from redb's changelog.

2.6.3 - 2025-08-23

• Fix correctness issue with range(), extract_from_if(), and retain_in(). If a RangeBounds with start > end was passed as an argument and start and end keys were stored in different internal pages in the database (i.e. a sufficient condition is that more than 4KiB of key-value pairs were between the two keys) then these methods would perform as if the argument had been start..

1.5.2 - 2025-08-23

• Fix correctness issue with range(), drain(), and drain_filter(). If a RangeBounds with start > end was passed as an argument and start and end keys were stored in different internal pages in the database (i.e. a sufficient condition is that more than 4KiB of key-value pairs were between the two keys) then these methods would perform as if the argument had been start..

3.0.0 - 2025-08-09

Removes support for file format v2.

Use Database::upgrade(), in redb 2.6, to migrate to the v3 file format.

General storage optimizations

The v3 file format has been further optimized to reduce the size of the database. Databases with only a few small keys will see the largest benefit, and the minimum size of a database file has decreased from ~2.5MiB to ~50KiB. To achieve the smallest file size call Database::compact() before dropping the Database.

Additionally, performance is ~15% better in bulk load benchmarks. This was achieved by implementing a custom hash function for various in-memory HashSets and HashMaps, and by optimizing the usage of buffers held in Arcs to reduce the number of atomic instructions executed.

Optimize storage of tuple types

Storage of variable width tuple types with arity greater than 1 is more efficient. The new format elides the length of any fixed width fields and uses varint encoding for the lengths of all variable width fields.

Note that this encoding is not compatible with the serialization of variable width tuples used in prior versions. To load tuple data created prior to version 3.0, wrap them in the Legacy type. For example, TableDefinition<u64, (&str, u32)> becomes TableDefinition<u64, Legacy<(&str, u32)>>. Fixed width tuples, such as (u32, u64) are backwards compatible.

Derive for Key and Value traits

Key and Value can be derived using the redb-derive crate. Note that it does not support schema migration. The recommended pattern to migrate schema is to create a new table, and then perform a migration from the old table to the new table.

Read-only multi-process support

Multiple processes may open the same database file for reading by using the new ReadOnlyDatabase type. On platforms which support file locks, this acquires a shared lock on the database file.

Enable garbage collection in Durability::None transactions

Non-durable transactions will now free pages when possible (pages allocated in a preceding

... (truncated)

Commits

• f4e3eb6 Bump version to 2.6.3
• e5e7f03 Update changelog
• 9173a82 Fix a correctness issue with range queries
• 21e54f1 Bump version to 2.6.2
• d53d8e7 Update changelog
• ee32065 Reserve some bits in page numbers for future use
• 95ea9c9 Bump version to 2.6.1
• 4923092 Update changelog
• 9ef23f3 Fix crash saving files without region headers
• See full diff in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

[vercel]

The latest updates on your projects. Learn more about Vercel for GitHub.

1 Skipped Deployment

Project	Deployment	Preview	Comments	Updated (UTC)
prism	Ignored	Preview		Aug 26, 2025 2:50am

[coderabbitai]

Important

Review skipped

Bot user detected.

To trigger a single review, invoke the @coderabbitai review command.

You can disable this status message by setting the reviews.review_status to false in the CodeRabbit configuration file.

---

🪧 Tips

Chat

There are 3 ways to chat with CodeRabbit:

• Review comments: Directly reply to a review comment made by CodeRabbit. Example:
  • I pushed a fix in commit <commit_id>, please review it.
  • Open a follow-up GitHub issue for this discussion.
• Files and specific lines of code (under the "Files changed" tab): Tag @coderabbitai in a new review comment at the desired location with your query.
• PR comments: Tag @coderabbitai in a new PR comment to ask questions about the PR branch. For the best results, please provide a very specific query, as very limited context is provided in this mode. Examples:
  • @coderabbitai gather interesting stats about this repository and render them as a table. Additionally, render a pie chart showing the language distribution in the codebase.
  • @coderabbitai read the files in the src/scheduler package and generate a class diagram using mermaid and a README in the markdown format.

Support

Need help? Join our Discord community for assistance with any issues or questions.

CodeRabbit Commands (Invoked using PR/Issue comments)

Type @coderabbitai help to get the list of available commands.

Other keywords and placeholders

• Add @coderabbitai ignore anywhere in the PR description to prevent this PR from being reviewed.
• Add @coderabbitai summary to generate the high-level summary at a specific location in the PR description.
• Add @coderabbitai anywhere in the PR title to generate the title automatically.

CodeRabbit Configuration File (.coderabbit.yaml)

• You can programmatically configure CodeRabbit by adding a .coderabbit.yaml file to the root of your repository.
• Please see the configuration documentation for more information.
• If your editor has YAML language server enabled, you can add the path at the top of this file to enable auto-completion and validation: # yaml-language-server: $schema=https://coderabbit.ai/integrations/schema.v2.json

Status, Documentation and Community

• Visit our Status Page to check the current availability of CodeRabbit.
• Visit our Documentation for detailed information on how to use CodeRabbit.
• Join our Discord Community to get help, request features, and share feedback.
• Follow us on X/Twitter for updates and announcements.

[dependabot]

Superseded by #434.