Angular CLI Plus for VS Code

A VS Code extension providing Angular CLI commands, schematics generation, and project tools directly from the VS Code interface.

Features

Schematics generator

• Right-click context menu integration: Generate Angular schematics by right-clicking any folder in the Explorer
• Organized submenu: All generate commands in a single "Ng Generate" submenu
• Configurable defaults: Set default options for all generate commands in VS Code settings
• Simple workflow: Only prompts for the name; all other options use configured defaults
• Smart project detection: Automatically detects the Angular project from angular.json based on the folder you right-clicked
• Supports all major Angular schematics:
  • Component
  • Service
  • Module
  • Directive
  • Pipe
  • Guard
  • Interceptor
  • Class
  • Interface
  • Enum
  • Resolver

Angular CLI commands (Command Palette & keyboard shortcuts)

Command	Shortcut	Description
Angular: Serve Application	Ctrl+Shift+A S	Runs ng serve for a selected project
Angular: Debug Application	Ctrl+Shift+A D	Starts ng serve, waits for the dev server, then attaches a browser debugger
Angular: Debug Storybook	Ctrl+Shift+A K	Starts Storybook, waits for it to be ready, then attaches a browser debugger
Angular: Debug Build (Watch)	Ctrl+Shift+A H	Runs ng build --watch + a static file server, then attaches a browser debugger
Angular: Build Project	Ctrl+Shift+A B	Runs ng build with the configured build configuration
Angular: Build Project (Watch)	Ctrl+Shift+A W	Runs ng build --watch with the configured watch configuration
Angular: Test Project	Ctrl+Shift+A T	Runs ng test for a project, all projects, or the currently open spec file
Angular: Restart Serve	Ctrl+Shift+A R	Restarts any active serve/build-watch terminal; re-attaches the debugger if a debug session was running
Angular: Lint Project	Ctrl+Shift+A L	Runs ng lint for a selected project
Angular: Update Packages	Ctrl+Shift+A U	Shows available package updates and runs ng update for selected packages
Angular: Close Terminals	Ctrl+Shift+A C	Opens a searchable multi-select list of all extension terminals with their state (running / terminated / errored) — select which ones to close

Failure notifications and retry

All terminal-based commands detect the exit code when the terminal closes:

• Success (exit code 0): brief info notification
• Failure (non-zero exit code): warning notification with a Retry button for build, lint, and test commands; Retry re-runs the exact same command without re-prompting

Last used project memory

Every command that shows a project picker remembers the last selection per command, persisted across VS Code sessions. The picker shows:

1. $(file) Current project (…) — if the active editor file belongs to a project
2. $(history) Last used (…) — the last picked project, if different from the above
3. Full project list

npm helpers

• npm: Install: runs npm install (or a custom command via angularCliPlus.npm.installCommand) and streams output to the "Angular CLI Plus: npm" output channel; automatically offers a clean install on failure when using the default command
• npm: Clean Install: removes node_modules and package-lock.json then runs npm install (or runs a custom command via angularCliPlus.npm.cleanInstallCommand); offers --force as a last resort on failure when using the default command
• Dependency check: on startup and on every git branch switch the extension verifies that node_modules exists and installed package versions satisfy package.json ranges, prompting to run npm install when needed; can be disabled via angularCliPlus.checkDependencies.enabled; also available as Angular CLI Plus: Check Dependencies in the Command Palette
• Tool version check: on startup the extension reads the engines field from package.json and checks that the installed versions of Node.js, npm, yarn, and pnpm satisfy the declared ranges; missing tools that can be installed via npm are installed automatically, version mismatches offer an "Update" button or a link to the tool's download page; can be disabled via angularCliPlus.checkToolVersions.enabled; also available as Angular CLI Plus: Check Tool Versions in the Command Palette

Usage

Generating schematics

1. Right-click on any folder in the VS Code Explorer
2. Select Ng Generate from the context menu
3. Choose the type of schematic you want to generate (Component, Service, etc.)
4. Enter the name for the item you want to generate
5. The extension automatically detects the Angular project from angular.json:
   • If one project matches the selected folder it is used automatically
   • If multiple projects match you will be prompted to choose from a list
   • If no projects match you can type the project name manually (leave empty for the default project)
6. The extension runs the Angular CLI command with your configured default options in the selected folder

Running Angular CLI commands

Use the keyboard shortcuts (Ctrl+Shift+A followed by a letter) or search for Angular CLI Plus commands in the Command Palette (Ctrl+Shift+P):

• Serve (Ctrl+Shift+A S): select a project and start ng serve in a terminal
• Debug (Ctrl+Shift+A D): start ng serve, wait for the server, then attach a browser debugger; the terminal is stopped when the debug session ends
• Debug Storybook (Ctrl+Shift+A K): detects Storybook via angular.json architect targets or a storybook npm script, starts it, waits for the port (default 6006), then attaches a browser debugger; configurable port via angularCliPlus.storybook.port
• Debug Build Watch (Ctrl+Shift+A H): runs ng build --watch and a static file server in parallel, waits for the server port, then attaches a browser debugger; both terminals are stopped when the session ends; configurable via angularCliPlus.buildWatch.servePort and angularCliPlus.buildWatch.staticServerCommand
• Build (Ctrl+Shift+A B): select a project and run ng build (configuration controlled by angularCliPlus.build.configuration)
• Build Watch (Ctrl+Shift+A W): same as build but adds --watch (configuration controlled by angularCliPlus.watch.configuration)
• Test (Ctrl+Shift+A T): select a project, all projects at once, or the .spec.ts file you have open
• Restart Serve (Ctrl+Shift+A R): restart any active ng serve, ng build --watch, Storybook, or static server terminal; if a debug session is attached it is stopped first and re-attached after the restart
• Lint (Ctrl+Shift+A L): select a project and run ng lint
• Update (Ctrl+Shift+A U): checks for available package updates, shows a multi-select list, then runs ng update; offers --force on failure
• Close Terminals (Ctrl+Shift+A C): opens a searchable multi-select QuickPick of all extension terminals; each entry shows the terminal name and state (running, terminated, errored); use the select-all checkbox or search to filter, then confirm to close the selected terminals

Debugging

The extension supports attaching a browser debugger to any dev server it starts. Configure the browser with angularCliPlus.debug.browser:

Value	Browser	Notes
chrome	Google Chrome	Built-in, no extra extension needed
edge	Microsoft Edge	Built-in, no extra extension needed
brave	Brave	Auto-detected from standard install paths
opera	Opera	Auto-detected from standard install paths
opera-gx	Opera GX	Auto-detected from standard install paths
firefox	Firefox	Requires the "Debugger for Firefox" VS Code extension
safari	Safari	Requires the "Safari Debugger" VS Code extension; macOS only

For a browser not in the list, or for a non-standard install path, set angularCliPlus.debug.browserExecutablePath to the full path of the browser executable. Any Chromium-based browser (Vivaldi, Arc, etc.) works this way.

npm helpers

Run Angular CLI Plus: npm: Install or Angular CLI Plus: npm: Clean Install from the Command Palette. Output is streamed to the Angular CLI Plus: npm output channel. The extension also automatically prompts you to run npm install when it detects missing or outdated packages on startup or after a git branch switch.

Troubleshooting

Commands don't appear in the Command Palette

Make sure the workspace contains an angular.json file. The extension activates automatically when VS Code opens.

Debug session fails to start

• Verify the selected browser is installed. Brave, Opera, and Opera GX require installation at the standard path; set angularCliPlus.debug.browserExecutablePath for non-standard locations.
• For Firefox, install the Debugger for Firefox VS Code extension.
• For Safari, install the Safari Debugger VS Code extension and use macOS.

Dependency check triggers too often / not at all

• Toggle angularCliPlus.checkDependencies.enabled in VS Code settings.
• The check fires on startup, on every git checkout (branch switch), and whenever package.json is saved.
• Diagnostic logs are available in the Angular CLI Plus: diagnostics output channel (View › Output, then select the channel from the dropdown).

ng / npm command not found

• Ensure Node.js and the Angular CLI are on your PATH. Restart VS Code after installing them.
• The Angular CLI Plus: npm output channel shows the full output of every npm operation.

Custom install command is rejected

Commands containing ; rm, ; del, ; format, ; mkfs, or ; dd are blocked as a safety measure. Use a plain package-manager invocation (e.g. pnpm install --frozen-lockfile).

Requirements

• Node.js and npm must be installed
• Angular CLI must be installed in your project or globally (@angular/cli)
• Your workspace must be an Angular project

Extension Settings

This extension contributes the following settings:

Component Options

• angularCliPlus.component.standalone: Whether generated components should be standalone (default: true)
• angularCliPlus.component.skipTests: Skip creating spec.ts test files (default: false)
• angularCliPlus.component.inlineStyle: Include styles inline in the component.ts file (default: false)
• angularCliPlus.component.inlineTemplate: Include template inline in the component.ts file (default: false)
• angularCliPlus.component.style: The file extension or preprocessor to use (css, scss, sass, less, none) (default: css)
• angularCliPlus.component.changeDetection: The change detection strategy (Default, OnPush) (default: Default)
• angularCliPlus.component.flat: Create files at the top level of the current folder (default: false)

Service Options

• angularCliPlus.service.skipTests: Skip creating spec.ts test files (default: false)
• angularCliPlus.service.flat: Create files at the top level of the current folder (default: true)

Module Options

• angularCliPlus.module.flat: Create files at the top level of the current folder (default: false)
• angularCliPlus.module.routing: Create a routing module (default: false)

Directive Options

• angularCliPlus.directive.standalone: Whether generated directives should be standalone (default: true)
• angularCliPlus.directive.skipTests: Skip creating spec.ts test files (default: false)
• angularCliPlus.directive.flat: Create files at the top level of the current folder (default: true)

Pipe Options

• angularCliPlus.pipe.standalone: Whether generated pipes should be standalone (default: true)
• angularCliPlus.pipe.skipTests: Skip creating spec.ts test files (default: false)
• angularCliPlus.pipe.flat: Create files at the top level of the current folder (default: true)

Guard Options

• angularCliPlus.guard.functional: Specifies whether to generate a guard as a function (default: true)
• angularCliPlus.guard.skipTests: Skip creating spec.ts test files (default: false)
• angularCliPlus.guard.flat: Create files at the top level of the current folder (default: true)

Interceptor Options

• angularCliPlus.interceptor.functional: Creates the interceptor as a HttpInterceptorFn (default: true)
• angularCliPlus.interceptor.skipTests: Skip creating spec.ts test files (default: false)
• angularCliPlus.interceptor.flat: Create files at the top level of the current folder (default: true)

Class Options

• angularCliPlus.class.skipTests: Skip creating spec.ts test files (default: false)

Resolver Options

• angularCliPlus.resolver.functional: Creates the resolver as a ResolveFn (default: true)
• angularCliPlus.resolver.skipTests: Skip creating spec.ts test files (default: false)
• angularCliPlus.resolver.flat: Create files at the top level of the current folder (default: true)

Debug Options

• angularCliPlus.debug.browser: Browser to use when launching a debug session (chrome, edge, brave, opera, opera-gx, firefox, safari) (default: chrome)
• angularCliPlus.debug.browserExecutablePath: Optional path to the browser executable; overrides automatic detection (default: "")

Build Options

• angularCliPlus.build.configuration: Configuration flag passed to ng build (default, production, development) (default: production)
• angularCliPlus.watch.configuration: Configuration flag passed to ng build --watch (default, inherit, production, development) — inherit copies the value from angularCliPlus.build.configuration (default: development)

Test Options

• angularCliPlus.test.watch: Run ng test in watch mode (default: false)
• angularCliPlus.test.ui: Enable the Vitest UI for interactive test execution — only available for the Vitest runner (default: false)

Storybook Options

• angularCliPlus.storybook.port: Port Storybook runs on; 0 means auto-detect from angular.json or use the default 6006 (default: 0)

Debug Build Watch Options

• angularCliPlus.buildWatch.servePort: Port the static file server listens on during a Debug Build Watch session (default: 4201)
• angularCliPlus.buildWatch.staticServerCommand: Command used to serve the build output; use {outputPath} and {port} as placeholders (default: npx serve {outputPath} -l {port})

Dependency Check Options

• angularCliPlus.checkDependencies.enabled: Check if npm dependencies are installed and match package.json on startup and on git branch changes (default: true)
• angularCliPlus.checkToolVersions.enabled: Check if Node.js, npm, yarn, and pnpm versions satisfy the engines field in package.json on startup (default: true)

Update Options

• angularCliPlus.update.allowDirty: Pass --allow-dirty to ng update, allowing updates when the working tree has uncommitted changes (default: false)

npm Command Options

• angularCliPlus.npm.installCommand: Custom command used by npm: Install (e.g. yarn install, pnpm install). Leave empty to use the default npm install with automatic clean/force fallbacks (default: "")
• angularCliPlus.npm.cleanInstallCommand: Custom command used by npm: Clean Install (e.g. yarn install --frozen-lockfile). Leave empty to use the default behaviour — removes node_modules and package-lock.json then runs npm install (default: "")