chore(deps): Bump CSharpier and 16 others by dependabot[bot] · Pull Request #82 · cjbanna/setlistbot

dependabot · 2026-01-19T02:10:21Z

Updated CSharpier from 1.1.2 to 1.2.5.

Release notes

1.2.5 What's Changed

Performance issue when running CLI in project with pnpm on Windows #1781

1.2.4 did not properly address this

The code to determine if there is a version of CSharpier.MsBuild referenced that does not match the version of CSharpier being run has been optimized to not look in node_modules or .git. This significantly speeds things up in some setups.

Full Changelog: belav/csharpier@1.2.4...1.2.5

1.2.4

What's Changed

Weird enter in closing when formatting XAML TextBlock #1785

CSharpier was breaking an end element to a new line when it did not need to.

<!-- input & expected output -->
<root>
  <TextBlock Foreground="DarkGray">
    I saw the sign. When I opened up my eyes, I saw the sign.
  </TextBlock>
  <TextBlock>
    I saw the sign. When I opened up my eyes, I saw the sign.
  </TextBlock>
</root>

<!-- 1.2.3 -->
<root>
  <TextBlock Foreground="DarkGray">
    I saw the sign. When I opened up my eyes, I saw the sign.
  </TextBlock
  >
  <TextBlock>
    I saw the sign. When I opened up my eyes, I saw the sign.
  </TextBlock>
</root>

Order Modifiers (IDE0036) not formatting when code is preceded by a comment. #1784

When incorrectly ordered modifiers were preceded by a comment they were not being reordered. Thanks go to @TimothyMakkison for the contribution

// input & 1.2.3

// Comment
required public int Prop1 { get; set; }

// expected output
// Comment
public required int Prop1 { get; set; }

Performance issue when running CLI in project with pnpm on Windows #1781

The code to determine if there is a version of CSharpier.MsBuild referenced that does not match the version of CSharpier being run has been optimized to not look in node_modules or .git. This significantly speeds things up in some setups.

Full Changelog: belav/csharpier@1.2.3...1.2.4

1.2.3 What's Changed

Large directories ignored in .gitignore significantly impact performance. #1776

CSharpier was enumerating all files within all subdirectories and then determining if they should be formatted or not. That logic was optimized to only enumerate files in directories that are not ignored.

Full Changelog: belav/csharpier@1.2.2...1.2.3

1.2.2 What's Changed

The null coalescing operator is grouped in an unexpected place #1769

Null coalescing is now consistently broken thanks to a contribution from @ogaken-1

// input & expected output
var x =
    someValue.SomeCall().SomeProperty.SomeProperty
    ?? someValue.SomeCall().SomeProperty.SomeProperty;

var x =
    someValue.SomeCall().SomeProperty?.SomeCall().SomeProperty
    ?? someValue.SomeCall().SomeProperty?.SomeCall().SomeProperty;

var x =
    someValue.SomeCall().A_______.B_______.C_______
    ?? someValue.SomeCall().A_______.B_______.C_______;

// 1.2.1
var x =
    someValue.SomeCall().SomeProperty.SomeProperty ?? someValue
        .SomeCall()
        .SomeProperty.SomeProperty;

var x =
    someValue.SomeCall().SomeProperty?.SomeCall().SomeProperty ?? someValue
        .SomeCall()
        .SomeProperty?.SomeCall()
        .SomeProperty;

var x =
    someValue.SomeCall().A_______.B_______.C_______ ?? someValue
        .SomeCall()
        .A_______.B_______.C_______;

Xml formatter should not add a second line #1760

When formatting an xml file with a declaration and extra blank line was being added.

<!-- input & expected output -->
<?xml version="1.0" encoding="utf-8"?>

<Element />

<!-- 1.2.1 -->
<?xml version="1.0" encoding="utf-8"?>


<Element />

... (truncated)

1.2.1 What's Changed

Multiline comments are now formatted in a single line in XML format #1747

The 1.2.0 release was combining xml comments into a single line.

<!-- input & expected output -->
<Root>
  <!-- This is the first line comment-->
  <!-- This is the second line of my comment-->
</Root>

<!-- 1.2.0 -->
<Root>
  <!-- This is the first line comment--><!-- This is the second line of my comment-->
</Root>

Full Changelog: belav/csharpier@1.2.0...1.2.1

1.2.0 What's Changed

Custom XML Parser #1679

CSharpier now has a custom xml parser. XmlDocument and XDocument do not provide the original white space or the original attribute values from the file that was parsed which blocked the ability to implement supporting keeping empty new lines and not automatically encoding attributes.

Support for keeping empty lines in xml files #1599

CSharpier now supports keeping a single empty line between elements in xml files. It will remove any initial or trailing empty lines.

<!-- input -->
<Root>

  <Element />


  <Element />

</Root>

<!-- expected output -->
<Root>
  <Element />

  <Element />
</Root>

<!-- 1.1.2 -->
<Root>
  <Element />
  <Element />
</Root>

Xml - don't automatically encode attribute values #1610

CSharpier will no longer encode attribute values. It will leave them encoded if they are supplied that way.

<!-- input & expected output -->
<Target Name="Transform" BeforeTargets="Build">
  <Message Importance="high" Text="@(MyItems->'MyItems has %(Identity)', ', ')" />
</Target>

<!-- 1.1.2 -->
<Target Name="Transform" BeforeTargets="Build">
  <Message Importance="high" Text="@(MyItems-&gt;'MyItems has %(Identity)', ', ')" />
</Target>

Add option to all integrations to report incorrect formatting as a warning instead of error #1687

Formatting "using" import split on multiple lines requires formatting it twice to get the expected result #1698

When a using contained a newline before the namespace it was not being sorted properly.

// input
using System.Net;
using
 ... (truncated)

Commits viewable in [compare view](https://github.com/belav/csharpier/compare/1.1.2...1.2.5).
</details>

Updated [husky](https://github.com/alirezanet/husky.net) from 0.7.2 to 0.8.0.

<details>
<summary>Release notes</summary>

_Sourced from [husky's releases](https://github.com/alirezanet/husky.net/releases)._

## 0.8.0

## What's Changed
* Add net10 support by @xanth in https://github.com/alirezanet/Husky.Net/pull/138
* Bugfix: Set a default value for FilteringRule when it’s not specified in the configuration.

## New Contributors
* @xanth made their first contribution in https://github.com/alirezanet/Husky.Net/pull/138

**Full Changelog**: https://github.com/alirezanet/Husky.Net/compare/v0.7.2...v0.8.0

Commits viewable in [compare view](https://github.com/alirezanet/husky.net/compare/v0.7.2...v0.8.0).
</details>

Updated [Microsoft.Azure.Functions.Worker](https://github.com/Azure/azure-functions-dotnet-worker) from 2.1.0 to 2.51.0.

<details>
<summary>Release notes</summary>

_Sourced from [Microsoft.Azure.Functions.Worker's releases](https://github.com/Azure/azure-functions-dotnet-worker/releases)._

## 2.51.0

## What's Changed

### Microsoft.Azure.Functions.Worker.OpenTelemetry 1.1.0

- Updated OpenTelemetry NuGet packages and aligned implementation with Semantic Conventions v1.37. (#3195)

## 2.50.0

## What's Changed

<!-- Please add your release notes in the following format:
- My change description (#PR/#issue)
-->

### Microsoft.Azure.Functions.Worker (metapackage) 2.50.0

- Adding `net10.0` TFM support.

### Microsoft.Azure.Functions.Worker.Core 2.50.0

- Adding `net10.0` TFM support.

### Microsoft.Azure.Functions.Worker.Grpc 2.50.0

- Adding `net10.0` TFM support.

Commits viewable in [compare view](https://github.com/Azure/azure-functions-dotnet-worker/compare/rabbitmq-extension-2.1.0...2.51.0).
</details>

Updated [Microsoft.Azure.Functions.Worker](https://github.com/Azure/azure-functions-dotnet-worker) from 2.2.0 to 2.51.0.

<details>
<summary>Release notes</summary>

_Sourced from [Microsoft.Azure.Functions.Worker's releases](https://github.com/Azure/azure-functions-dotnet-worker/releases)._

## 2.51.0

## What's Changed

### Microsoft.Azure.Functions.Worker.OpenTelemetry 1.1.0

- Updated OpenTelemetry NuGet packages and aligned implementation with Semantic Conventions v1.37. (#3195)

## 2.50.0

## What's Changed

<!-- Please add your release notes in the following format:
- My change description (#PR/#issue)
-->

### Microsoft.Azure.Functions.Worker (metapackage) 2.50.0

- Adding `net10.0` TFM support.

### Microsoft.Azure.Functions.Worker.Core 2.50.0

- Adding `net10.0` TFM support.

### Microsoft.Azure.Functions.Worker.Grpc 2.50.0

- Adding `net10.0` TFM support.

Commits viewable in [compare view](https://github.com/Azure/azure-functions-dotnet-worker/commits/2.51.0).
</details>

Updated [Microsoft.Azure.Functions.Worker.Sdk](https://github.com/Azure/azure-functions-dotnet-worker) from 2.0.5 to 2.0.7.

<details>
<summary>Release notes</summary>

_Sourced from [Microsoft.Azure.Functions.Worker.Sdk's releases](https://github.com/Azure/azure-functions-dotnet-worker/releases)._

## 2.0.7

## What's Changed

<!-- Please add your release notes in the following format:
- My change description (#PR/#issue)
-->

### Microsoft.Azure.Functions.Worker.Sdk 2.0.7

- Reversal of change to suppress generation of functions.metadata file.

## 2.0.6

## What's Changed

### Microsoft.Azure.Functions.Worker.Sdk 2.0.6

- Build no longer generates `functions.metadata` if source-generated metadata provider is enabled. (#2974)
- Fixing `dotnet run` to work on Windows when core tools is installed from NPM (#3127)
- `Microsoft.Azure.Functions.Worker.Sdk.Generators` bumped to `1.3.6`.

### Microsoft.Azure.Functions.Worker.Sdk.Generators 1.3.6

- Fix bug that results in duplicate properties recorded for a binding (#3227)

Commits viewable in [compare view](https://github.com/Azure/azure-functions-dotnet-worker/compare/sdk-2.0.5...sdk-2.0.7).
</details>

Updated [Microsoft.Extensions.Configuration.Abstractions](https://github.com/dotnet/dotnet) from 9.0.9 to 10.0.2.

<details>
<summary>Release notes</summary>

_Sourced from [Microsoft.Extensions.Configuration.Abstractions's releases](https://github.com/dotnet/dotnet/releases)._

## 10.0.0-preview.6.25358.103

You can build .NET 10.0 Preview 6 from the repository by cloning the release tag `v10.0.0-preview.6.25358.103` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.6.25358.103/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.6.25358.103/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 10.0.0-preview.5.25277.114

You can build .NET 10.0 Preview 5 from the repository by cloning the release tag `v10.0.0-preview.5.25277.114` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.5.25277.114/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.5.25277.114/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 10.0.0-preview.4.25258.110

You can build .NET 10.0 Preview 4 from the repository by cloning the release tag `v10.0.0-preview.4.25258.110` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.4.25258.110/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.4.25258.110/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 10.0.0-preview.3.25171.5

You can build .NET 10.0 Preview 3 from the repository by cloning the release tag `v10.0.0-preview.3.25171.5` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.3.25171.5/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.3.25171.5/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 10.0.0-preview.2.25163.2

You can build .NET 10.0 Preview 2 from the repository by cloning the release tag `v10.0.0-preview.2.25163.2` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.2.25163.2/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.2.25163.2/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 10.0.0-preview.1.25080.5

You can build .NET 10.0 Preview 1 from the repository by cloning the release tag `v10.0.0-preview.1.25080.5` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.1.25080.5/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.1.25080.5/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.113

<!-- This file is a template for a GitHub release notes post. -->
<!-- The line prefixed by 'Title:' will be submitted as the title of the release notes, and the rest of the file will be submitted as the body. -->

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.113` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.113/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.113/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.112

<!-- This file is a template for a GitHub release notes post. -->
<!-- The line prefixed by 'Title:' will be submitted as the title of the release notes, and the rest of the file will be submitted as the body. -->

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.112` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.112/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.112/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.111

<!-- This file is a template for a GitHub release notes post. -->
<!-- The line prefixed by 'Title:' will be submitted as the title of the release notes, and the rest of the file will be submitted as the body. -->

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.111` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.111/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.111/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.110

<!-- This file is a template for a GitHub release notes post. -->
<!-- The line prefixed by 'Title:' will be submitted as the title of the release notes, and the rest of the file will be submitted as the body. -->

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.110` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.110/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.110/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.109

<!-- This file is a template for a GitHub release notes post. -->
<!-- The line prefixed by 'Title:' will be submitted as the title of the release notes, and the rest of the file will be submitted as the body. -->

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.109` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.109/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.109/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.101

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.101` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.101/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.101/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

Commits viewable in [compare view](https://github.com/dotnet/dotnet/commits).
</details>

Pinned [Microsoft.Extensions.Configuration.Abstractions](https://github.com/dotnet/dotnet) at 10.0.2.

<details>
<summary>Release notes</summary>

_Sourced from [Microsoft.Extensions.Configuration.Abstractions's releases](https://github.com/dotnet/dotnet/releases)._

## 10.0.0-preview.6.25358.103

You can build .NET 10.0 Preview 6 from the repository by cloning the release tag `v10.0.0-preview.6.25358.103` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.6.25358.103/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.6.25358.103/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 10.0.0-preview.5.25277.114

You can build .NET 10.0 Preview 5 from the repository by cloning the release tag `v10.0.0-preview.5.25277.114` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.5.25277.114/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.5.25277.114/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 10.0.0-preview.4.25258.110

You can build .NET 10.0 Preview 4 from the repository by cloning the release tag `v10.0.0-preview.4.25258.110` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.4.25258.110/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.4.25258.110/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 10.0.0-preview.3.25171.5

You can build .NET 10.0 Preview 3 from the repository by cloning the release tag `v10.0.0-preview.3.25171.5` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.3.25171.5/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.3.25171.5/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 10.0.0-preview.2.25163.2

You can build .NET 10.0 Preview 2 from the repository by cloning the release tag `v10.0.0-preview.2.25163.2` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.2.25163.2/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.2.25163.2/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 10.0.0-preview.1.25080.5

You can build .NET 10.0 Preview 1 from the repository by cloning the release tag `v10.0.0-preview.1.25080.5` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.1.25080.5/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.1.25080.5/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.113

<!-- This file is a template for a GitHub release notes post. -->
<!-- The line prefixed by 'Title:' will be submitted as the title of the release notes, and the rest of the file will be submitted as the body. -->

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.113` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.113/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.113/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.112

<!-- This file is a template for a GitHub release notes post. -->
<!-- The line prefixed by 'Title:' will be submitted as the title of the release notes, and the rest of the file will be submitted as the body. -->

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.112` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.112/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.112/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.111

<!-- This file is a template for a GitHub release notes post. -->
<!-- The line prefixed by 'Title:' will be submitted as the title of the release notes, and the rest of the file will be submitted as the body. -->

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.111` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.111/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.111/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.110

<!-- This file is a template for a GitHub release notes post. -->
<!-- The line prefixed by 'Title:' will be submitted as the title of the release notes, and the rest of the file will be submitted as the body. -->

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.110` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.110/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.110/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.109

<!-- This file is a template for a GitHub release notes post. -->
<!-- The line prefixed by 'Title:' will be submitted as the title of the release notes, and the rest of the file will be submitted as the body. -->

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.109` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.109/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.109/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.101

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.101` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.101/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.101/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

Commits viewable in [compare view](https://github.com/dotnet/dotnet/commits).
</details>

Pinned [Microsoft.Extensions.Configuration.Binder](https://github.com/dotnet/dotnet) at 10.0.2.

<details>
<summary>Release notes</summary>

_Sourced from [Microsoft.Extensions.Configuration.Binder's releases](https://github.com/dotnet/dotnet/releases)._

## 10.0.0-preview.6.25358.103

You can build .NET 10.0 Preview 6 from the repository by cloning the release tag `v10.0.0-preview.6.25358.103` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.6.25358.103/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.6.25358.103/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 10.0.0-preview.5.25277.114

You can build .NET 10.0 Preview 5 from the repository by cloning the release tag `v10.0.0-preview.5.25277.114` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.5.25277.114/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.5.25277.114/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 10.0.0-preview.4.25258.110

You can build .NET 10.0 Preview 4 from the repository by cloning the release tag `v10.0.0-preview.4.25258.110` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.4.25258.110/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.4.25258.110/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 10.0.0-preview.3.25171.5

You can build .NET 10.0 Preview 3 from the repository by cloning the release tag `v10.0.0-preview.3.25171.5` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.3.25171.5/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.3.25171.5/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 10.0.0-preview.2.25163.2

You can build .NET 10.0 Preview 2 from the repository by cloning the release tag `v10.0.0-preview.2.25163.2` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.2.25163.2/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.2.25163.2/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 10.0.0-preview.1.25080.5

You can build .NET 10.0 Preview 1 from the repository by cloning the release tag `v10.0.0-preview.1.25080.5` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.1.25080.5/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.1.25080.5/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.113

<!-- This file is a template for a GitHub release notes post. -->
<!-- The line prefixed by 'Title:' will be submitted as the title of the release notes, and the rest of the file will be submitted as the body. -->

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.113` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.113/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.113/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.112

<!-- This file is a template for a GitHub release notes post. -->
<!-- The line prefixed by 'Title:' will be submitted as the title of the release notes, and the rest of the file will be submitted as the body. -->

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.112` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.112/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.112/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.111

<!-- This file is a template for a GitHub release notes post. -->
<!-- The line prefixed by 'Title:' will be submitted as the title of the release notes, and the rest of the file will be submitted as the body. -->

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.111` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.111/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.111/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.110

<!-- This file is a template for a GitHub release notes post. -->
<!-- The line prefixed by 'Title:' will be submitted as the title of the release notes, and the rest of the file will be submitted as the body. -->

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.110` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.110/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.110/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.109

<!-- This file is a template for a GitHub release notes post. -->
<!-- The line prefixed by 'Title:' will be submitted as the title of the release notes, and the rest of the file will be submitted as the body. -->

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.109` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.109/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.109/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.101

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.101` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.101/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.101/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

Commits viewable in [compare view](https://github.com/dotnet/dotnet/commits).
</details>

Updated [Microsoft.Extensions.Configuration.UserSecrets](https://github.com/dotnet/dotnet) from 9.0.10 to 10.0.2.

<details>
<summary>Release notes</summary>

_Sourced from [Microsoft.Extensions.Configuration.UserSecrets's releases](https://github.com/dotnet/dotnet/releases)._

## 10.0.0-preview.6.25358.103

You can build .NET 10.0 Preview 6 from the repository by cloning the release tag `v10.0.0-preview.6.25358.103` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.6.25358.103/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.6.25358.103/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 10.0.0-preview.5.25277.114

You can build .NET 10.0 Preview 5 from the repository by cloning the release tag `v10.0.0-preview.5.25277.114` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.5.25277.114/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.5.25277.114/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 10.0.0-preview.4.25258.110

You can build .NET 10.0 Preview 4 from the repository by cloning the release tag `v10.0.0-preview.4.25258.110` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.4.25258.110/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.4.25258.110/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 10.0.0-preview.3.25171.5

You can build .NET 10.0 Preview 3 from the repository by cloning the release tag `v10.0.0-preview.3.25171.5` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.3.25171.5/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.3.25171.5/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 10.0.0-preview.2.25163.2

You can build .NET 10.0 Preview 2 from the repository by cloning the release tag `v10.0.0-preview.2.25163.2` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.2.25163.2/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.2.25163.2/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 10.0.0-preview.1.25080.5

You can build .NET 10.0 Preview 1 from the repository by cloning the release tag `v10.0.0-preview.1.25080.5` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.1.25080.5/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.1.25080.5/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.113

<!-- This file is a template for a GitHub release notes post. -->
<!-- The line prefixed by 'Title:' will be submitted as the title of the release notes, and the rest of the file will be submitted as the body. -->

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.113` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.113/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.113/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.112

<!-- This file is a template for a GitHub release notes post. -->
<!-- The line prefixed by 'Title:' will be submitted as the title of the release notes, and the rest of the file will be submitted as the body. -->

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.112` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.112/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.112/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.111

<!-- This file is a template for a GitHub release notes post. -->
<!-- The line prefixed by 'Title:' will be submitted as the title of the release notes, and the rest of the file will be submitted as the body. -->

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.111` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.111/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.111/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.110

<!-- This file is a template for a GitHub release notes post. -->
<!-- The line prefixed by 'Title:' will be submitted as the title of the release notes, and the rest of the file will be submitted as the body. -->

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.110` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.110/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.110/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.109

<!-- This file is a template for a GitHub release notes post. -->
<!-- The line prefixed by 'Title:' will be submitted as the title of the release notes, and the rest of the file will be submitted as the body. -->

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.109` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.109/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.109/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.101

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.101` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.101/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.101/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

Commits viewable in [compare view](https://github.com/dotnet/dotnet/commits).
</details>

Updated [Microsoft.Extensions.DependencyInjection](https://github.com/dotnet/dotnet) from 9.0.10 to 10.0.2.

<details>
<summary>Release notes</summary>

_Sourced from [Microsoft.Extensions.DependencyInjection's releases](https://github.com/dotnet/dotnet/releases)._

## 10.0.0-preview.6.25358.103

You can build .NET 10.0 Preview 6 from the repository by cloning the release tag `v10.0.0-preview.6.25358.103` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.6.25358.103/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.6.25358.103/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 10.0.0-preview.5.25277.114

You can build .NET 10.0 Preview 5 from the repository by cloning the release tag `v10.0.0-preview.5.25277.114` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.5.25277.114/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.5.25277.114/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 10.0.0-preview.4.25258.110

You can build .NET 10.0 Preview 4 from the repository by cloning the release tag `v10.0.0-preview.4.25258.110` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.4.25258.110/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.4.25258.110/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 10.0.0-preview.3.25171.5

You can build .NET 10.0 Preview 3 from the repository by cloning the release tag `v10.0.0-preview.3.25171.5` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.3.25171.5/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.3.25171.5/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 10.0.0-preview.2.25163.2

You can build .NET 10.0 Preview 2 from the repository by cloning the release tag `v10.0.0-preview.2.25163.2` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.2.25163.2/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.2.25163.2/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 10.0.0-preview.1.25080.5

You can build .NET 10.0 Preview 1 from the repository by cloning the release tag `v10.0.0-preview.1.25080.5` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.1.25080.5/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.1.25080.5/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.113

<!-- This file is a template for a GitHub release notes post. -->
<!-- The line prefixed by 'Title:' will be submitted as the title of the release notes, and the rest of the file will be submitted as the body. -->

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.113` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.113/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.113/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.112

<!-- This file is a template for a GitHub release notes post. -->
<!-- The line prefixed by 'Title:' will be submitted as the title of the release notes, and the rest of the file will be submitted as the body. -->

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.112` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.112/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.112/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.111

<!-- This file is a template for a GitHub release notes post. -->
<!-- The line prefixed by 'Title:' will be submitted as the title of the release notes, and the rest of the file will be submitted as the body. -->

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.111` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.111/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.111/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.110

<!-- This file is a template for a GitHub release notes post. -->
<!-- The line prefixed by 'Title:' will be submitted as the title of the release notes, and the rest of the file will be submitted as the body. -->

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.110` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.110/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.110/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.109

<!-- This file is a template for a GitHub release notes post. -->
<!-- The line prefixed by 'Title:' will be submitted as the title of the release notes, and the rest of the file will be submitted as the body. -->

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.109` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.109/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.109/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.101

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.101` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.101/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.101/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

Commits viewable in [compare view](https://github.com/dotnet/dotnet/commits).
</details>

Updated [Microsoft.Extensions.DependencyInjection.Abstractions](https://github.com/dotnet/dotnet) from 9.0.10 to 10.0.2.

<details>
<summary>Release notes</summary>

_Sourced from [Microsoft.Extensions.DependencyInjection.Abstractions's releases](https://github.com/dotnet/dotnet/releases)._

## 10.0.0-preview.6.25358.103

You can build .NET 10.0 Preview 6 from the repository by cloning the release tag `v10.0.0-preview.6.25358.103` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.6.25358.103/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.6.25358.103/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 10.0.0-preview.5.25277.114

You can build .NET 10.0 Preview 5 from the repository by cloning the release tag `v10.0.0-preview.5.25277.114` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.5.25277.114/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.5.25277.114/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 10.0.0-preview.4.25258.110

You can build .NET 10.0 Preview 4 from the repository by cloning the release tag `v10.0.0-preview.4.25258.110` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.4.25258.110/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.4.25258.110/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 10.0.0-preview.3.25171.5

You can build .NET 10.0 Preview 3 from the repository by cloning the release tag `v10.0.0-preview.3.25171.5` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.3.25171.5/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.3.25171.5/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 10.0.0-preview.2.25163.2

You can build .NET 10.0 Preview 2 from the repository by cloning the release tag `v10.0.0-preview.2.25163.2` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.2.25163.2/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.2.25163.2/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 10.0.0-preview.1.25080.5

You can build .NET 10.0 Preview 1 from the repository by cloning the release tag `v10.0.0-preview.1.25080.5` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.1.25080.5/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v10.0.0-preview.1.25080.5/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.113

<!-- This file is a template for a GitHub release notes post. -->
<!-- The line prefixed by 'Title:' will be submitted as the title of the release notes, and the rest of the file will be submitted as the body. -->

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.113` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.113/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.113/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.112

<!-- This file is a template for a GitHub release notes post. -->
<!-- The line prefixed by 'Title:' will be submitted as the title of the release notes, and the rest of the file will be submitted as the body. -->

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.112` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.112/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.112/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.111

<!-- This file is a template for a GitHub release notes post. -->
<!-- The line prefixed by 'Title:' will be submitted as the title of the release notes, and the rest of the file will be submitted as the body. -->

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.111` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.111/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.111/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.110

<!-- This file is a template for a GitHub release notes post. -->
<!-- The line prefixed by 'Title:' will be submitted as the title of the release notes, and the rest of the file will be submitted as the body. -->

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.110` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.110/README.md#building).

Alternatively, you can build from the sources attached to this release directly.
More information on this process can be found in the [dotnet/dotnet repository](https://github.com/dotnet/dotnet/blob/v9.0.110/README.md#building-from-released-sources).

Attached are PGP signatures for the GitHub generated tarball and zipball. You can find the public key at https://dot.net/release-key-2023

## 9.0.109

<!-- This file is a template for a GitHub release notes post. -->
<!-- The line prefixed by 'Title:' will be submitted as the title of the release notes, and the rest of the file will be submitted as the body. -->

You can build .NET 9.0 from the repository by cloning the release tag `v9.0.109` and following the build instructions in the [main README.md](https://github.com/dotnet/dotnet/blob/v9.0.109/README.md#building).

Alternatively, you can build from the sources attached to this release direc...

_Description has been truncated_

Bumps CSharpier from 1.1.2 to 1.2.5 Bumps husky from 0.7.2 to 0.8.0 Bumps Microsoft.Azure.Functions.Worker to 2.51.0 Bumps Microsoft.Azure.Functions.Worker.Sdk from 2.0.5 to 2.0.7 Bumps Microsoft.Extensions.Configuration.Abstractions to 10.0.2 Bumps Microsoft.Extensions.Configuration.Binder from 9.0.9 to 10.0.2 Bumps Microsoft.Extensions.Configuration.UserSecrets from 9.0.10 to 10.0.2 Bumps Microsoft.Extensions.DependencyInjection from 9.0.10 to 10.0.2 Bumps Microsoft.Extensions.DependencyInjection.Abstractions from 9.0.10 to 10.0.2 Bumps Microsoft.Extensions.Hosting.Abstractions from 9.0.10 to 10.0.2 Bumps Microsoft.Extensions.Logging from 9.0.10 to 10.0.2 Bumps Microsoft.Extensions.Logging.Abstractions to 10.0.2 Bumps Microsoft.Extensions.Options from 9.0.10 to 10.0.2 Bumps Microsoft.NET.Test.Sdk from 18.0.0 to 18.0.1 Bumps Serilog.Extensions.Logging from 9.0.2 to 10.0.0 Bumps Serilog.Sinks.Console from 6.0.0 to 6.1.1 Bumps Vogen from 8.0.2 to 8.0.4 --- updated-dependencies: - dependency-name: CSharpier dependency-version: 1.2.5 dependency-type: direct:production update-type: version-update:semver-minor dependency-group: dotnet-dependencies - dependency-name: husky dependency-version: 0.8.0 dependency-type: direct:production update-type: version-update:semver-minor dependency-group: dotnet-dependencies - dependency-name: Microsoft.Extensions.Configuration.Abstractions dependency-version: 10.0.2 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Microsoft.Extensions.Configuration.Binder dependency-version: 10.0.2 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Microsoft.Extensions.DependencyInjection dependency-version: 10.0.2 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Microsoft.Extensions.DependencyInjection.Abstractions dependency-version: 10.0.2 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Microsoft.Extensions.DependencyInjection.Abstractions dependency-version: 10.0.2 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Microsoft.Extensions.Logging.Abstractions dependency-version: 10.0.2 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Microsoft.Extensions.Hosting.Abstractions dependency-version: 10.0.2 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Microsoft.Extensions.Logging.Abstractions dependency-version: 10.0.2 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Microsoft.Extensions.Options dependency-version: 10.0.2 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Vogen dependency-version: 8.0.4 dependency-type: direct:production update-type: version-update:semver-patch dependency-group: dotnet-dependencies - dependency-name: Microsoft.Extensions.DependencyInjection.Abstractions dependency-version: 10.0.2 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Microsoft.Extensions.DependencyInjection.Abstractions dependency-version: 10.0.2 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Microsoft.Extensions.DependencyInjection.Abstractions dependency-version: 10.0.2 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Microsoft.Azure.Functions.Worker dependency-version: 2.51.0 dependency-type: direct:production update-type: version-update:semver-minor dependency-group: dotnet-dependencies - dependency-name: Microsoft.Azure.Functions.Worker.Sdk dependency-version: 2.0.7 dependency-type: direct:production update-type: version-update:semver-patch dependency-group: dotnet-dependencies - dependency-name: Microsoft.Extensions.Configuration.Abstractions dependency-version: 10.0.2 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Microsoft.Extensions.Configuration.Abstractions dependency-version: 10.0.2 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Microsoft.Extensions.Configuration.Binder dependency-version: 10.0.2 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Microsoft.Extensions.Configuration.Binder dependency-version: 10.0.2 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Microsoft.Extensions.Configuration.UserSecrets dependency-version: 10.0.2 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Microsoft.Extensions.DependencyInjection dependency-version: 10.0.2 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Microsoft.Extensions.DependencyInjection.Abstractions dependency-version: 10.0.2 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Microsoft.Extensions.DependencyInjection.Abstractions dependency-version: 10.0.2 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Microsoft.Extensions.DependencyInjection.Abstractions dependency-version: 10.0.2 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Microsoft.Extensions.Logging dependency-version: 10.0.2 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Microsoft.Extensions.Logging.Abstractions dependency-version: 10.0.2 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Microsoft.Extensions.Logging.Abstractions dependency-version: 10.0.2 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Microsoft.Extensions.Options dependency-version: 10.0.2 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Microsoft.Extensions.Options dependency-version: 10.0.2 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Serilog.Extensions.Logging dependency-version: 10.0.0 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Serilog.Sinks.Console dependency-version: 6.1.1 dependency-type: direct:production update-type: version-update:semver-minor dependency-group: dotnet-dependencies - dependency-name: Microsoft.Azure.Functions.Worker dependency-version: 2.51.0 dependency-type: direct:production update-type: version-update:semver-minor dependency-group: dotnet-dependencies - dependency-name: Microsoft.Azure.Functions.Worker.Sdk dependency-version: 2.0.7 dependency-type: direct:production update-type: version-update:semver-patch dependency-group: dotnet-dependencies - dependency-name: Microsoft.Extensions.Configuration.UserSecrets dependency-version: 10.0.2 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Serilog.Extensions.Logging dependency-version: 10.0.0 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Serilog.Sinks.Console dependency-version: 6.1.1 dependency-type: direct:production update-type: version-update:semver-minor dependency-group: dotnet-dependencies - dependency-name: Microsoft.Extensions.Logging.Abstractions dependency-version: 10.0.2 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Microsoft.NET.Test.Sdk dependency-version: 18.0.1 dependency-type: direct:production update-type: version-update:semver-patch dependency-group: dotnet-dependencies - dependency-name: Microsoft.NET.Test.Sdk dependency-version: 18.0.1 dependency-type: direct:production update-type: version-update:semver-patch dependency-group: dotnet-dependencies - dependency-name: Microsoft.NET.Test.Sdk dependency-version: 18.0.1 dependency-type: direct:production update-type: version-update:semver-patch dependency-group: dotnet-dependencies - dependency-name: Microsoft.NET.Test.Sdk dependency-version: 18.0.1 dependency-type: direct:production update-type: version-update:semver-patch dependency-group: dotnet-dependencies - dependency-name: Microsoft.Extensions.Logging.Abstractions dependency-version: 10.0.2 dependency-type: direct:production update-type: version-update:semver-patch dependency-group: dotnet-dependencies - dependency-name: Microsoft.NET.Test.Sdk dependency-version: 18.0.1 dependency-type: direct:production update-type: version-update:semver-patch dependency-group: dotnet-dependencies - dependency-name: Microsoft.Azure.Functions.Worker dependency-version: 2.51.0 dependency-type: direct:production update-type: version-update:semver-minor dependency-group: dotnet-dependencies - dependency-name: Microsoft.NET.Test.Sdk dependency-version: 18.0.1 dependency-type: direct:production update-type: version-update:semver-patch dependency-group: dotnet-dependencies - dependency-name: Microsoft.NET.Test.Sdk dependency-version: 18.0.1 dependency-type: direct:production update-type: version-update:semver-patch dependency-group: dotnet-dependencies - dependency-name: Microsoft.Extensions.Logging.Abstractions dependency-version: 10.0.2 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Microsoft.Extensions.Options dependency-version: 10.0.2 dependency-type: direct:production update-type: version-update:semver-major dependency-group: dotnet-dependencies - dependency-name: Microsoft.NET.Test.Sdk dependency-version: 18.0.1 dependency-type: direct:production update-type: version-update:semver-patch dependency-group: dotnet-dependencies - dependency-name: Microsoft.NET.Test.Sdk dependency-version: 18.0.1 dependency-type: direct:production update-type: version-update:semver-patch dependency-group: dotnet-dependencies - dependency-name: Microsoft.NET.Test.Sdk dependency-version: 18.0.1 dependency-type: direct:production update-type: version-update:semver-patch dependency-group: dotnet-dependencies ... Signed-off-by: dependabot[bot] <support@github.com>

dependabot bot added .NET Pull requests that update .NET code dependencies Pull requests that update a dependency file labels Jan 19, 2026

dependabot bot requested a review from cjbanna as a code owner January 19, 2026 02:10

dependabot bot added dependencies Pull requests that update a dependency file .NET Pull requests that update .NET code labels Jan 19, 2026

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

chore(deps): Bump CSharpier and 16 others#82

chore(deps): Bump CSharpier and 16 others#82
dependabot[bot] wants to merge 1 commit intomainfrom
dependabot/nuget/dot-config/dotnet-dependencies-d79dc3cb4f

dependabot bot commented on behalf of github Jan 19, 2026 •

edited

Loading

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

0 participants

Conversation

dependabot bot commented on behalf of github Jan 19, 2026 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

1.2.5

What's Changed

Performance issue when running CLI in project with pnpm on Windows #​1781

1.2.4

1.2.4

What's Changed

Weird enter in closing when formatting XAML TextBlock #​1785

Order Modifiers (IDE0036) not formatting when code is preceded by a comment. #​1784

Performance issue when running CLI in project with pnpm on Windows #​1781

1.2.3

What's Changed

Large directories ignored in .gitignore significantly impact performance. #​1776

1.2.2

What's Changed

The null coalescing operator is grouped in an unexpected place #​1769

Xml formatter should not add a second line #​1760

1.2.1

What's Changed

Multiline comments are now formatted in a single line in XML format #​1747

1.2.0

What's Changed

Custom XML Parser #​1679

Support for keeping empty lines in xml files #​1599

Xml - don't automatically encode attribute values #​1610

Add option to all integrations to report incorrect formatting as a warning instead of error #​1687

Formatting "using" import split on multiple lines requires formatting it twice to get the expected result #​1698

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

0 participants

dependabot bot commented on behalf of github Jan 19, 2026 •

edited

Loading

Performance issue when running CLI in project with pnpm on Windows #1781

Weird enter in closing when formatting XAML TextBlock #1785

Order Modifiers (IDE0036) not formatting when code is preceded by a comment. #1784

Performance issue when running CLI in project with pnpm on Windows #1781

Large directories ignored in .gitignore significantly impact performance. #1776

The null coalescing operator is grouped in an unexpected place #1769

Xml formatter should not add a second line #1760

Multiline comments are now formatted in a single line in XML format #1747

Custom XML Parser #1679

Support for keeping empty lines in xml files #1599

Xml - don't automatically encode attribute values #1610

Add option to all integrations to report incorrect formatting as a warning instead of error #1687

Formatting "using" import split on multiple lines requires formatting it twice to get the expected result #1698