Arduino IDE patch

Marlin/Configuration.h

@@ -8,8 +8,8 @@
 //User specified version info of THIS file to display in [Pronterface, etc] terminal window during startup.
 //Implementation of an idea by Prof Braino to inform user that any changes made
 //to THIS file by the user have been successfully uploaded into firmware.
-#define STRING_VERSION_CONFIG_H "2012-05-02" //Personal revision number for changes to THIS file.
-#define STRING_CONFIG_H_AUTHOR "erik" //Who made the changes.
+#define STRING_VERSION_CONFIG_H "2012-07-10" //Personal revision number for changes to THIS file.
+#define STRING_CONFIG_H_AUTHOR "markd" //Who made the changes.
 
 // This determines the communication speed of the printer
 //#define BAUDRATE 250000
@@ -32,7 +32,7 @@
 // Gen3+ =9
 
 #ifndef MOTHERBOARD
-#define MOTHERBOARD 7
+#define MOTHERBOARD 91
 #endif
 
 //===========================================================================
@@ -181,11 +181,14 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
 // default settings 
 //#define //DEFAULT_AXIS_STEPS_PER_UNIT   {79.87, 79.87, 2566, 563,78} // Al's TVRR
 //#define DEFAULT_AXIS_STEPS_PER_UNIT   {81.26, 80.01, 2561, 599.14} // Michel TVRR old
-#define DEFAULT_AXIS_STEPS_PER_UNIT   {80.00, 79.84, 2560, 599.14} // Michel TVRR
+//#define DEFAULT_AXIS_STEPS_PER_UNIT   {80.00, 79.84, 2560, 599.14} // Michel TVRR
+#define DEFAULT_AXIS_STEPS_PER_UNIT   {80.00, 79.84, 2560, 620.0} // markd TVRR
 
 #ifndef DEFAULT_AXIS_STEPS_PER_UNIT
 #define DEFAULT_AXIS_STEPS_PER_UNIT   {78.7402,78.7402,200*8/3,760*1.1}  // default steps per unit for ultimaker 
 #endif
+
+//#define DEFAULT_AXIS_STEPS_PER_UNIT   {78.7402,78.7402,200*8/3,760*1.1}  // default steps per unit for ultimaker 
 #define DEFAULT_MAX_FEEDRATE          {500, 500, 5, 45}    // (mm/sec)    
 #define DEFAULT_MAX_ACCELERATION      {9000,9000,100,10000}    // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for skeinforge 40+, for older versions raise them a lot.
 

Marlin/Makefile

@@ -66,8 +66,8 @@ endif
 F_CPU = 20000000
 
 UPLOAD_RATE = 115200
-AVRDUDE_PROGRAMMER = arduino
-PORT = /dev/arduino
+AVRDUDE_PROGRAMMER = wiring
+PORT = /dev/ttyUSB0
 
 TARGET = $(notdir $(CURDIR))
 

Marlin/Sanguino/boards.txt

@@ -14,3 +14,21 @@ sanguino.bootloader.lock_bits=0x0F
 sanguino.build.mcu=atmega644p
 sanguino.build.f_cpu=16000000L
 sanguino.build.core=arduino
+
+
+##############################################################
+
+omc.name=OMC with Atmega644 at 20Mhz
+omc.upload.protocol=stk500v2
+omc.upload.maximum_size=63488
+omc.upload.speed=115200
+omc.bootloader.low_fuses=0xE7
+omc.bootloader.high_fuses=0xD4
+omc.bootloader.extended_fuses=0xFC
+omc.bootloader.path=OMC
+omc.bootloader.file=bootloader-644-20MHz.hex
+omc.bootloader.unlock_bits=0x3F
+omc.bootloader.lock_bits=0x0F
+omc.build.mcu=atmega644
+omc.build.f_cpu=20000000L
+omc.build.core=arduino

Marlin/Sanguino/bootloaders/OMC/bootloader-644-20MHz.hex

@@ -0,0 +1,75 @@
+:10F800008FEF90E19EBF8DBF11241FBE5A9A00C09A
+:10F81000CDB7DEB7CD51D140DEBFCDBF1092C50010
+:10F820008AE08093C40088E18093C100EE24FF2425
+:10F8300020E0552400E010E039E0432E9BE0292E23
+:10F84000312C2C0E3D1ECFC14150504060407040C5
+:10F8500011F43FE206C08091C00087FFF5CF3091E0
+:10F86000C600933021F1943028F4913099F0923011
+:10F87000C8F407C0953049F1953000F19630D1F5C4
+:10F8800035C03B3119F491E02BE134C03F3291F5A2
+:10F890003983BBC1313011F0351559F52327532E6B
+:10F8A00092E028C0B32FA0E0232793E023C0832F4A
+:10F8B00090E0A82BB92B232794E01CC03E30C9F45C
+:10F8C000232795E0EE24FF2415C0E1E0F0E0EC0FE3
+:10F8D000FD1FEE0DFF1D30830894E11CF11C232752
+:10F8E000EA16FB0639F4D70196E004C0321709F492
+:10F8F0008CC190E041ED5AE363E570E0ACCF90E05D
+:10F9000044C08D81803311F090E00AC08F8188233C
+:10F9100011F49EE105C0813011F099E001C096E933
+:10F920001A821B828D818C838E818D839E831F82A0
+:10F9300047E050E0F4C01A8288E08B8381E48C8336
+:10F9400086E58D8382E58E8389E48F8383E58887CE
+:10F9500080E589878FE58A8782E38B874BE050E0DB
+:10F96000DEC08A81813941F0823941F0803911F459
+:10F970008FE005C080E003C082E001C08AE01A8207
+:10F980008B8343E050E0CBC091E01A8242E050E02C
+:10F99000C7C08D81882311F48EE124C0813011F01D
+:10F9A00089E020C086E91EC01A82E1E0F0E04092C2
+:10F9B0005700849118C08B81803579F48C81883010
+:10F9C00031F4E2E0F0E04092570084910BC0E0E0B7
+:10F9D000F0E040925700849105C0E3E0F0E04092EF
+:10F9E000570084911A828B831C8244E050E097C0B8
+:10F9F000BC80AA248D81082F10E00A291B29000F42
+:10FA0000111F1A828AC09A8088248B81682F70E027
+:10FA100068297929933109F033C0F7EF0F3F1F07A9
+:10FA200010F0A8013FC023E0F80120935700E895AB
+:10FA300007B600FCFDCFA801D1018C9111962C9145
+:10FA400011971296D22ECC2490E08C299D2921E08A
+:10FA5000FA010C0120935700E89511244E5F5F4F87
+:10FA60006250704051F725E0F80120935700E89567
+:10FA700007B600FCFDCF81E180935700E89512C0E6
+:10FA8000A801FB01D10141BD52BD4F5F5F4F8D9178
+:10FA900080BDFA9AF99AF999FECF3197A1F7A8019A
+:10FAA000460F571F1A828A0138C07A8066248B81DC
+:10FAB000A82FB0E0A629B7291A828981843191F450
+:10FAC000BD019E012D5F3F4FF80185919491F90191
+:10FAD000808391832E5F3F4F0E5F1F4F62507040B7
+:10FAE00099F713C0A801BD019E012D5F3F4F41BD95
+:10FAF00052BD4F5F5F4FF89A80B5F90181939F0126
+:10FB000061507040A1F70A0F1B1FAD014D5F5F4FA1
+:10FB1000F901108204C080EC8A8342E050E090E05A
+:10FB2000FBE1F093C6008091C00086FFFCCF80917E
+:10FB3000C00080648093C0005092C6008091C000D5
+:10FB400086FFFCCF8091C00080648093C000652F49
+:10FB50005093C6008091C00086FFFCCF8091C0000A
+:10FB600080648093C000342F4093C6008091C00011
+:10FB700086FFFCCF8091C00080648093C0008EE03F
+:10FB80008093C6008091C00086FFFCCF8091C000AA
+:10FB900080648093C00025E1252523272627FE01C8
+:10FBA000319610C030813093C6008091C00086FF2E
+:10FBB000FCCF31968091C00080648093C0002327E1
+:10FBC000415050404115510569F72093C60080917E
+:10FBD000C00086FFFCCF8091C00080648093C0008D
+:10FBE000992349F4539441ED5AE363E570E090E0C2
+:10FBF000A0E0B0E030CE5A9881E180935700E895BC
+:10FC000011241F921F920895FFCF9981933109F417
+:10FC1000FACE9431C8F4963009F4EACE973050F415
+:10FC2000923009F46CCE933009F49BCE913009F0F8
+:10FC300072CF81CE913109F4A7CE923108F0E1CE96
+:10FC4000903109F068CF5BCE983109F4B4CE993188
+:10FC500050F4953109F4D7CE953108F426CF96317A
+:10FC600009F059CF22CF9B3109F493CE9C3120F477
+:10FC70009A3109F050CF98CE9D3109F442CE9F328F
+:06FC800009F049CFB8CFE6
+:040000030000F80001
+:00000001FF

Marlin/pins.h

@@ -1044,7 +1044,7 @@
 #define KNOWN_BOARD 1
 
 #if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__)
-#error Oops!  Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. (Final OMCA board)
+#error Oops!  Make sure you have 'OMC with Atmega644 at 20Mhz' selected from the 'Tools -> Boards' menu. (Final OMCA board)
 #endif
 
 #define X_STEP_PIN         26