A short description of the keyboard/project
- Keyboard Maintainer: [Daniel Zenner](https://github.com/Daniel Zenner)
- Hardware Supported: The PCBs, controllers supported
- Hardware Availability: Links to where you can find this hardware
Greetings!
This is an attempt to update the redox (thanks Matt) to a rp2040 controller, adding VIA support, updating the case and swicthing the layout. As a bonus going to attempt an Openscad key generator.
Todo: -[] Update QMK to latest version, modify the configuration to use rp2040 pro micro -[] nice!nano for wireless option? -[] Add Via support app -[] Updated case (narrowing down base for normal case) -[] Case options wireless, elevated and tented -[] Keycaps Generator OpenSCAD
| Qty | Item | Notes |
|---|---|---|
| 70 | Cherry MX compatible switches | |
| 2 | Redox PCBs | Available here |
| 70 | 1N4148 diodes | SMD diodes can also be used |
| 2 | PJ-320A 4 poles 3.5 mm TRRS connectors | |
| 2 | 4.7 kOhm resistors | Need to be soldered on one half only |
| 2 | Through hole momentary switch | Dimensions 6mm x 6mm x 4.3mm |
| 2 | RP2040 Pro Micro 16MB/128Mbit USB-C Controller | |
| 1 | TRRS cable | |
| 1 | USB C cable | |
| 70 | Cherry MX compatible keycaps | 10x 1.25u keycaps, 6x 1.5u keycaps, 54x 1u keycaps |
| 14 | WS2812/WS2812B leds | Optional RGB-underglow |
Make example for this keyboard (after setting up your build environment):
make zendox:default
Flashing example for this keyboard:
make zendox:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
- Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
- Keycode in layout: Press the key mapped to
QK_BOOTif it is available