MeshCore Bot

A Python bot that connects to MeshCore mesh networks via serial port, BLE, or TCP/IP. The bot responds to messages containing configured keywords, executes commands, and provides various data services including weather, solar conditions, and satellite pass information.

Features

• Connection Methods: Serial port, BLE (Bluetooth Low Energy), or TCP/IP
• Keyword Responses: Configurable keyword-response pairs with template variables
• Command System: Plugin-based command architecture with built-in commands
• Rate Limiting: Configurable rate limiting to prevent network spam
• User Management: Ban/unban users with persistent storage
• Scheduled Messages: Send messages at configured times
• Direct Message Support: Respond to private messages
• Logging: Console and file logging with configurable levels

Service Plugins

• Discord Bridge: One-way webhook bridge to post mesh messages to Discord (docs)
• Packet Capture: Capture and publish packets to MQTT brokers (docs)
• Map Uploader: Upload node adverts to map.meshcore.dev (docs)
• Weather Service: Scheduled forecasts, alerts, and lightning detection (docs)

Requirements

• Python 3.7+
• MeshCore-compatible device (Heltec V3, RAK Wireless, etc.)
• USB cable or BLE capability

Installation

Quick Start (Development)

1. Clone the repository:

git clone <repository-url>
cd meshcore-bot

2. Install dependencies:

pip install -r requirements.txt

3. Copy and configure the bot:

Full Configuration Option: This config.ini example enables all bot commands and provides full configuration options.

cp config.ini.example config.ini
# Edit config.ini with your settings

Minimal Configuration Option: For users who only want core testing commands (ping, test, path, prefix, multitest), you can use the minimal configuration instead:

cp config.ini.minimal-example config.ini
# Edit config.ini with your connection and bot settings

4. Run the bot:

python3 meshcore_bot.py

Production Installation (Systemd Service)

For production deployment as a system service:

1. Install as systemd service:

sudo ./install-service.sh

2. Configure the bot:

sudo nano /opt/meshcore-bot/config.ini

3. Start the service:

sudo systemctl start meshcore-bot

4. Check status:

sudo systemctl status meshcore-bot

See SERVICE-INSTALLATION.md for detailed service installation instructions.

NixOS

Use the Nix flake via flake.nix

meshcore-bot.url = "github:agessaman/meshcore-bot/";

And in your system config

{
  imports = [inputs.meshcore-bot.nixosModules.default];
  services.meshcore-bot = {
    enable = true;
    webviewer.enable = true;
    settings = {
      Connection.connection_type = "serial";
      Connection.serial_port = "/dev/ttyUSB0";
      Bot.bot_name = "MyBot";
    };
  };
}

Configuration

The bot uses config.ini for all settings. Key configuration sections:

Connection

[Connection]
connection_type = serial          # serial, ble, or tcp
serial_port = /dev/ttyUSB0        # Serial port path (for serial)
#hostname = 192.168.1.60         # TCP hostname/IP (for TCP)
#tcp_port = 5000                  # TCP port (for TCP)
#ble_device_name = MeshCore       # BLE device name (for BLE)
timeout = 30                      # Connection timeout

Bot Settings

[Bot]
bot_name = MeshCoreBot            # Bot identification name
enabled = true                    # Enable/disable bot
rate_limit_seconds = 2            # Rate limiting interval
startup_advert = flood            # Send advert on startup

Keywords

[Keywords]
# Format: keyword = response_template
# Variables: {sender}, {connection_info}, {snr}, {timestamp}, {path}
test = "Message received from {sender} | {connection_info}"
help = "Bot Help: test, ping, help, hello, cmd, wx, aqi, sun, moon, solar, hfcond, satpass, dice, roll, joke, dadjoke, sports, channels, path, prefix, repeater, stats, alert"

Channels

[Channels]
monitor_channels = general,test,emergency  # Channels to monitor
respond_to_dms = true                      # Enable DM responses

External Data APIs

[External_Data]
# API keys for external services
n2yo_api_key =                    # Satellite pass data
airnow_api_key =                  # Air quality data

Alert Command

[Alert_Command]
alert_enabled = true                    # Enable/disable alert command
max_incident_age_hours = 24             # Maximum age for incidents (hours)
max_distance_km = 20.0                  # Maximum distance for proximity queries (km)
agency.city.<city_name> = <agency_ids>   # City-specific agency IDs (e.g., agency.city.seattle = 17D20,17M15)
agency.county.<county_name> = <agency_ids> # County-specific agency IDs (aggregates all city agencies)

Logging

[Logging]
log_level = INFO                  # DEBUG, INFO, WARNING, ERROR, CRITICAL
log_file = meshcore_bot.log       # Log file path
colored_output = true             # Enable colored console output

Usage

Running the Bot

python meshcore_bot.py

Available Commands

For a comprehensive list of all available commands with examples and detailed explanations, see COMMANDS.md.

Quick reference:

• Basic: test, ping, help, hello, cmd
• Information: wx, gwx, aqi, sun, moon, solar, solarforecast, hfcond, satpass, channels
• Emergency: alert
• Gaming: dice, roll, magic8
• Entertainment: joke, dadjoke, hacker, catfact
• Sports: sports
• MeshCore Utility: path, prefix, stats, multitest, webviewer
• Management (DM only): repeater, advert, feed, announcements, greeter

Message Response Templates

Keyword responses support these template variables:

• {sender} - Sender's node ID
• {connection_info} - Connection details (direct/routed)
• {snr} - Signal-to-noise ratio
• {timestamp} - Message timestamp
• {path} - Message routing path

Example:

[Keywords]
test = "Message received from {sender} | {connection_info}"
ping = "Pong!"
help = "Bot Help: test, ping, help, hello, cmd, wx, gwx, aqi, sun, moon, solar, solarforecast, hfcond, satpass, dice, roll, joke, dadjoke, sports, channels, path, prefix, repeater, stats, multitest, alert, webviewer"

Hardware Setup

Serial Connection

1. Flash MeshCore firmware to your device
2. Connect via USB
3. Configure serial port in config.ini:

   [Connection]
   connection_type = serial
   serial_port = /dev/ttyUSB0  # Linux
   # serial_port = COM3        # Windows
   # serial_port = /dev/tty.usbserial-*  # macOS

BLE Connection

1. Ensure your MeshCore device supports BLE
2. Configure BLE in config.ini:

   [Connection]
   connection_type = ble
   ble_device_name = MeshCore

TCP Connection

1. Ensure your MeshCore device has TCP/IP connectivity (e.g., via gateway or bridge)
2. Configure TCP in config.ini:

   [Connection]
   connection_type = tcp
   hostname = 192.168.1.60  # IP address or hostname
   tcp_port = 5000          # TCP port (default: 5000)

Troubleshooting

Common Issues

1. Serial Port Not Found:

   • Check device connection
   • Verify port name in config
   • List available ports: python -c "import serial.tools.list_ports; print([p.device for p in serial.tools.list_ports.comports()])"

2. BLE Connection Issues:

   • Ensure device is discoverable
   • Check device name in config
   • Verify BLE permissions

3. TCP Connection Issues:

   • Verify hostname/IP address is correct
   • Check that TCP port is open and accessible
   • Ensure network connectivity to the device
   • Verify the MeshCore device supports TCP connections
   • Check firewall settings if connection fails

4. Message Parsing Errors:

   • Enable DEBUG logging for detailed information
   • Check meshcore library documentation for protocol details

5. Rate Limiting:

   • Adjust rate_limit_seconds in config
   • Check logs for rate limiting messages

Debug Mode

Enable debug logging:

[Logging]
log_level = DEBUG

Architecture

The bot uses a modular plugin architecture:

• Core modules (modules/): Shared utilities and core functionality
• Command plugins (modules/commands/): Individual command implementations
• Service plugins (modules/service_plugins/): Background services (Discord bridge, packet capture, etc.)
• Plugin loaders: Dynamic discovery and loading of command and service plugins
• Message handler: Processes incoming messages and routes to appropriate handlers

Adding New Plugins

Command Plugin:

1. Create a new file in modules/commands/
2. Inherit from BaseCommand
3. Implement the execute() method
4. The plugin loader will automatically discover and load it

from .base_command import BaseCommand
from ..models import MeshMessage

class MyCommand(BaseCommand):
    name = "mycommand"
    keywords = ['mycommand']
    description = "My custom command"

    async def execute(self, message: MeshMessage) -> bool:
        await self.send_response(message, "Hello from my command!")
        return True

Service Plugin:

1. Create a new file in modules/service_plugins/
2. Inherit from BaseServicePlugin
3. Implement start() and stop() methods
4. Add configuration section to config.ini.example

Contributing

1. Fork the repository
2. Create a feature branch
3. Make your changes
4. Submit a pull request against the dev branch

License

This project is licensed under the MIT License.

Acknowledgments

• MeshCore Project for the mesh networking protocol
• Some commands adapted from MeshingAround bot by K7MHI Kelly Keeton 2024
• Packet capture service based on meshcore-packet-capture by agessaman
• meshcore-decoder by Michael Hart for client-side packet decoding and decryption in the web viewer