PyMoDAQ Plugin Manager

A plugin manager for PyMoDAQ, Modular Data Acquisition with Python.

Give a list of available, installable or updatable plugins compatible with pymodaq

PyMoDAQ Plugins

Repo Name	Authors	Version plugin	Instruments
# PyMoDAQ Orsay STEM and Camera plugin		0.0.1
Amplitude Lasers	_S. J. Weber	0.1.1	Viewer0D AmplitudeSystemsCRC16: Let you control the laser settings and grab info on the laser status (tested on a Satsuma)
Andor	Sébastien. J. Weber	1.1.2	Actuators Shamrock: Shamrock series of spectrometer used as a monochromator Viewer1D ShamrockCCD: Shamrock series of spectrometer using the Andor CCD cameras (built using double inheritance) ShamrockSCMOS: Shamrock series of spectrometer using the Andor SCMOS cameras (Not tested) (built using double inheritance) ShamrockCCDComposition: Shamrock series of spectrometer using the Andor CCD cameras (built using CCD camera inheritance and Shamrock composition) ShamrockSCMOSComposition: Shamrock series of spectrometer using the Andor SCMOS cameras (Not tested) (built using SCMOS camera inheritance and Shamrock composition) Viewer2D AndorCCD: Andor CCD camera using the SDK2 AndorSCMOS: Andor CCD camera using the SDK3
Femto Characterization	_S. J. Weber	0.1.0	Viewer1D femto: Fake detector mocking typically a spectrometer acquiring FROG traces
Fluorescence Lifetime Imaging Microscopy	Sebastien J. Weber	0.1.0	ViewerND FLIM: FLIM using piezoconcept XY stage and picoquant timeharp TH260"
Greateyes	Romain Geneaux	1.0.2	Viewer2D GreateyesCCD: Greateyes CCD cameras using the SDK
Hamamatsu	Romain Géneaux (romain.geneaux@cea.fr)	0.2.0	Viewer2D Hamamatsu All cameras using the DCAM-API. Hardware ROI (region of interest) and binning (1x or 2x) are supported. To use ROIs, click on "Show/Hide ROI selection area" in the viewer panel (icon with dashed rectangle). Position the rectangle as you wish, either with mouse or by entering coordinates, then click "Update ROI" button.
HoloEye Instruments	Sebastien J. Weber (sebastien.weber@cemes.fr)	1.0.2	Actuators HoloeyeFile: Used to load phase data into the SLM from a file HoloeyeFullScreen: Used to load a constant (and controllable) phase into the SLM HoloeyeSplitScreen: Used to load a binary phase mask into the SLM and control both the
Horiba Spectrometers	Sebastien J. Weber	2.0.0	Viewer1D Labspec6TCP: Control of Labspec6 settings and acquisition using TCP/IP communication
Keithley	Sebastien J. Weber Sébastien Guerrero (sebastien.guerrero@insa-lyon.fr)	1.1.0	Viewer0D Keithley_Pico: Pico-Amperemeter Keithley 648X Series, 6430 and 6514 Keithley2110: Multimeter Keithley 2110 Keithley27XX: Keithley 27XX Multimeter/Switch System using switching modules from the 7700 series.
National Instrument DAQmx	Sébastien J. Weber	0.3.1	Actuators DAQmx_MultipleScannerControl: Control of piezo scanners with an analog output. Viewer0D DAQmx_PLcounter: Single photon counting
Newport Instruments	Sebastien J. Weber David Bresteau (david.bresteau@cea.fr)	1.1.0	Actuators Conex: Piezo actuators from the CONEX-AGAP series" Newport_ESP100: ESP100 motion controllers AgilisSerial: for controllers AG-UC8 and AG-UC2 tested with motorized mounts AG-M100N (no encoder)
Ocean Insight (Optics	Sebastien J. Weber Nicolas Tappy	1.0.0	Viewer1D Omnidriver: Control of Spectrometer using the Omnidriver library (should be installed) Seabreeze : If the Omnidriver library is not available, a plugin implementation based on seabreeze is provided: https://python-seabreeze.readthedocs.io/en/latest/index.html
Physical Measurements Hardware	Sebastien J. Weber	0.1.1	Viewer0D Keithley_Pico: Pico-Amperemeter Keithley 648X Series, 6430 and 6514 Keithley2110: Multimeter Keithley 2110 Lockin7270: Lockin Amplifier Ametek 7270 LockinSR830: LockIn Amplifier SR830 Viewer1D LecroyWaveRunner6Zi: Oscilloscope LecroyWaveRunner 6Zi Tektronix: Oscilloscope Tektronix MDO Series Picoscope: Picoscope from Picotechnology Viewer2D OpenCVCam: Webcams control using the opencv library GenICam: GeniCam compliant cameras suing the harvester libary TIS: The Imaging Source TIS cameras
Physik Instrumente Stages	Sebastien J. Weber	1.2.0	Actuators PI: All stages compatible with the GCS2 library. Tested on E-816, C-863 (mercury DC/Stepper), C-663, E-545. PILegacy: All stages compatible with the GCS2 library. Tested on E-816, C-863 (mercury DC/Stepper), C-663, E-545. PI_MMCLegacy: old controller and stages using the 32 bits MMC dll (requires 32bit python) C-862 controller. Using PI_MMC: old controller and stages using the 32 bits MMC dll (requires 32bit python) C-862 controller. Using a
Picoquant	Sebastien J. Weber	0.1.0	Viewer1D TH260: Timeharp TH260 for photon counting and time tagging
PiezoConcept Stages	Sebastien J. Weber	1.1.0	Actuators PiezoConcept : piezoconcept stages (tested on BIO2.100) using the usual serial commands PiezoConceptPI: Special firmware to emulate functions form the GCS2 library from Physik Instrumente
Princeton Instruments Cameras	Nicolas Tappy	0.1.0	Viewer2D picam: Control of cameras using the picam library.
PyMoDAQ Piezosystem Jena	Nicolas Tappy	0.1.0	Actuators
PyMoDAQ Plugins Mock	Sebastien J. Weber	4.4.0	Actuators Mock actuator to test PyMoDAQ functionalities MockTau mock actuator with characteristic time to reach set value TCP server to communicate with other DAQ_Move or third party applications LECO director to communicate with other DAQ_Move or third party applications Viewer0D Mock 0D detector to test PyMoDAQ functionalities Mock Adaptive detector to test PyMoDAQ adaptive scan mode TCP server to communicate with other DAQ_Viewer or third party applications LECO director to communicate with other DAQ_Viewer or third party applications Viewer1D Mock 1D detector to test PyMoDAQ functionalities Mock Spectro detector to test pymodaq_spectro functionalities TCP server to communicate with other DAQ_Viewer or third party applications LECO director to communicate with other DAQ_Viewer or third party applications Viewer2D Mock 2D detector to test PyMoDAQ functionalities TCP server to communicate with other DAQ_Viewer or third party applications LECO director to communicate with other DAQ_Viewer or third party applications ViewerND Mock ND detector to test PyMoDAQ functionalities LECO director to communicate with other DAQ_Viewer or third party applications
Raspberry plugin	Sebastien J. Weber (sebastien.weber@cnrs.fr) .. if needed use this field Contributors ============ * First Contributor * Other Contributors .. if needed use this field Depending on the plugin type, delete/complete the fields below	0.0.1	Actuators Viewer0D Viewer1D Viewer2D picamera: control of the integrated pi camera using the Picamera2 library
Smaract	David Bresteau (david.bresteau@cea.fr) Sebastien J. Weber (sebastien.weber@cnrs.fr)	2.0.4	Actuators SmaractMCS SLC linear stages with sensor (S option) with MCS controller SmaractMCS2 SLC linear stages with sensor (S option) with MCS2 controller SmaractSCU SLC linear or angular stages with or without sensors using the Instrumental-lib package and the
StellarNet	Romain Geneaux	2.0.1	Viewer1D Stellarnet: USB spectrometers made by StellarNet, Inc (https://www.stellarnet.us/spectrometers/).
Thorlabs Instruments	Sebastien J. Weber David Bresteau (david.bresteau@cea.fr) Nicolas Tappy (nicolas.tappy@epfl.ch) Romain Geneaux (romain.geneaux@cea.fr)	1.2.0	Actuators KinesisIntegratedStepper: Integrated Stepper Motor Kinesis series (tested on K10CR1) Kinesis_Flipper: Kinesis series Flipper MFF101_pylablib: Kinesis series Flipper mount (thorlabs MFF101), similar to Kinesis_FLipper but using the pylablib control module. PRM1Z8_pylablib: DC servo motorized 360° rotation mount (Thorlabs PRM1Z8) using the pylablib control module. The Thorlabs APT software should be installed: https://www.thorlabs.com/newgrouppage9.cfm?objectgroup_id=9019. Viewer0D Kinesis_KPA101: Position Sensitive Photodetector Kinesis series (KPA101) TLPMPowermeter: TLPM dll compatible series (PM101x, PM102x, PM103x, PM100USB, PM16-Series, PM160, PM400, PM100A, PM100D, PM200) Viewer2D DCx cameras: Tested with DCC3240M. Works with Windows. Precise installation instructions can be found here: Scientific cameras: sCMOS camera series Zelux, Kiralux, Quantalux. Implemented using the pylablib control module.
Uniblitz	Matthieu Guer (matthieu.guer@cea.fr) Romain Géneaux (romain.geneaux@cea.fr)	0.1.2	Actuators VLM1: control of Uniblitz VLM1 Shutter Interface Module by USB. Very basic functionality to switch the shutter, without reading the actual state of the shutter.
Zaber Technologies	Romain Géneaux Sebastien J. Weber (sebastien.weber@cnrs.fr)	2.0.1	Actuators Zaber All motors using the Zaber ASCII Motion Library. Rotations and translations should be both supported (units should adapt to the actuator type), but I only tested translation stages so far. ZaberBinary: control of zaber actuators using the legacy binary protocol
pymodaq_plugins_KDC_101
	Enzo Sebiane (enzo.sebiane@orange.fr) Instruments =========== KDC101: Control of the Thorlabs KDC101 motor. Actuators +++++++++ KDC101 Viewer0D ++++++++ Viewer1D ++++++++ Viewer2D ++++++++	1.4.1	Actuators

• **KDC101**

Viewer0D

Viewer1D

Viewer2D

| | pymodaq_plugins_alcatel |

• Titouan Gadeyne (titouan.gadeyne@cea.fr)

| 1.1.0 | Viewer0D

• **ACM1000**: Alcatel ACM 1000 six-port gauge controller

| | pymodaq_plugins_basler |

• Benedikt Burger

| 0.1.1 | Actuators

Viewer0D

Viewer1D

Viewer2D

• **Basler**: control of Basler cameras

| | pymodaq_plugins_bnc |

• Christian Cabello

| 0.0.6 | Actuators

• **BNC**: control of BNC575 Delay Generator

Viewer0D

Viewer1D

Viewer2D

| | pymodaq_plugins_crystal_technology |

• Sébastien J. Weber (sebastien.weber@cnrs.fr) .. if needed use this field Contributors ============ * First Contributor * Other Contributors

| 0.0.1 | Actuators

• **AOTFPro**: control of the AOTF from YSl and Crystal Technology

Viewer0D

Viewer1D

Viewer2D

| | pymodaq_plugins_mockexamples |

• Sebastien J. Weber (sebastien.weber@cnrs.fr)

| 0.2.2 | Actuators

• **MockCamera**: set of X, Y or theta actuators moving a light image on the corresponding camera instrument
• **MockNamedAxes**: Show examples of multi axis actuator controller specifying both a name and an integer ID
• **MockRandom** actuator to be used with the corresponding 0D detector. If they share the same ID in the preset then
• **MockTauMulti**: controller with multiple axes and showing how to add a characteristic time (to mimic real

Viewer0D

• **MockAdaptive**: to be used to show how a detector can be used for adaptive samplking (not working yet with PyMoDAQ4)
• **MockRandom**: generate a value of a noisy gaussian given the current value of the underlying mock controller.

Viewer1D

• **MockSpectro**: mimic data one coulf obtain from a spectrometer. Specific methods are also added to seemlessly use
• **MockRandom**: Generate a noisy Gaussian with a spread axis (to illustrate the sorting button action of the Viewer1D

* **MockRandom**: Generate a noisy Gaussian with a spread axis (to illustrate the sorting button action of the Viewer1D

Viewer2D

• **MockCamera**: if connected with a preset with the MockCamera actuator (or a few of them, X, Y and thera), then the
• **RoiStuff**: example of ROI exporting into the instrument plugin. Not yet working, planned to be ok for the future

ViewerND

• **MockEvents**: Simulate the acquisition of photons received on a timepix camera (position and time of arrival of each photon)

| | pymodaq_plugins_opencv |

• Sebastien J. Weber (sebastien.weber@cnrs.fr)

| 0.0.2 | Viewer2D

• **opencv**: control of cameras using the opencv library (mainly webcams)

| | pymodaq_plugins_redpitaya |

• Sebastien J. Weber (sebastien.weber@cemes.fr)

| 0.0.3 | Viewer1D

• **RedPitayaSCPI**: perform analog data acquisition using one of the fast channels

| | pymodaq_plugins_signal_recovery |

• Sebastien J. Weber (sebastien.weber@cemes.fr)
• Other author (myotheremail@xxx.org) .. if needed use this field Contributors ============ * First Contributor * Other Contributors

| 0.0.2 | Actuators

• **Lockin_DSP7270**: control of the Lockin DSP7270 model (for instance to control the oscillator frequency)

Viewer0D

• **Lockin_DSP7270**: control of the Lockin DSP7270 model

| | pymodaq_plugins_stanford_research_systems |

• Sebastien J. Weber (sebastien.weber@cemes.fr)

| 0.0.2 | Viewer0D

| | pymodaq_plugins_template |

• First Author (myemail@xxx.org)
• Other author (myotheremail@xxx.org) .. if needed use this field Contributors ============ * First Contributor * Other Contributors .. if needed use this field Depending on the plugin type, delete/complete the fields below Instruments =========== Below is the list of instruments included in this plugin Actuators +++++++++
• **yyy**: control of yyy actuators
• **xxx**: control of xxx actuators Viewer0D ++++++++
• **yyy**: control of yyy 0D detector
• **xxx**: control of xxx 0D detector Viewer1D ++++++++
• **yyy**: control of yyy 1D detector
• **xxx**: control of xxx 1D detector Viewer2D ++++++++
• **yyy**: control of yyy 2D detector
• **xxx**: control of xxx 2D detector PID Models ========== Extensions ========== Installation instructions =========================
• PyMoDAQ’s version.
• Operating system’s version.
• What manufacturer’s drivers should be installed to make this plugin run?

| 0.1.2 | Actuators

• **yyy**: control of yyy actuators
• **xxx**: control of xxx actuators

Viewer0D

• **yyy**: control of yyy 0D detector
• **xxx**: control of xxx 0D detector

Viewer1D

• **yyy**: control of yyy 1D detector
• **xxx**: control of xxx 1D detector

Viewer2D

• **yyy**: control of yyy 2D detector
• **xxx**: control of xxx 2D detector

| | pymodaq_plugins_template |

• First Author (myemail@xxx.org)
• Other author (myotheremail@xxx.org) .. if needed use this field Contributors ============ * First Contributor * Other Contributors .. if needed use this field Depending on the plugin type, delete/complete the fields below Instruments =========== Below is the list of instruments included in this plugin Actuators +++++++++
• **yyy**: control of yyy actuators
• **xxx**: control of xxx actuators Viewer0D ++++++++
• **yyy**: control of yyy 0D detector
• **xxx**: control of xxx 0D detector Viewer1D ++++++++
• **yyy**: control of yyy 1D detector
• **xxx**: control of xxx 1D detector Viewer2D ++++++++
• **yyy**: control of yyy 2D detector
• **xxx**: control of xxx 2D detector PID Models ========== Extensions ========== Installation instructions =========================
• PyMoDAQ’s version.
• Operating system’s version.
• What manufacturer’s drivers should be installed to make this plugin run?

| 0.1.1 | Actuators

• **yyy**: control of yyy actuators
• **xxx**: control of xxx actuators

Viewer0D

• **yyy**: control of yyy 0D detector
• **xxx**: control of xxx 0D detector

Viewer1D

• **yyy**: control of yyy 1D detector
• **xxx**: control of xxx 1D detector

Viewer2D

• **yyy**: control of yyy 2D detector
• **xxx**: control of xxx 2D detector

|