Releases: SimDevices-Project/SimGEKI
SimGEKI Firmware Nightly Builds (Updated 2025-11-22T06:01:54+08:00)
🌙 SimGEKI Nightly Builds - Auto Updated!
ℹ️ What is this?
Nightly Builds are the latest development versions of the SimGEKI firmware, automatically built with every commit to the main branch. This means you always have access to the most recent changes and features, but please note that these builds are not guaranteed to be stable.
🚀 How to use?
Download the firmware files from the assets below and flash them to your SimGEKI device. Make sure to check the compatibility with your hardware version.
📖 Flash Instructions: Update Firmware Guide
📋 Latest Build Information
📅 Build Time: 2025-11-22T06:01:54+08:00
🔨 Source Commit: eb841bcc0d146fbb8b24573c3717b932baf318d0
👤 Author: Handle
💬 Commit Message:
↩ revert(去抖): 回滚到#045c317 版本
回滚去抖算法，提升稳定性
📦 Available Firmware Variants
| Variant | Description | Download |
|---|---|---|
| SimGETRO_Public | Public release version | 📥 BIN / 📥 HEX |
| SimGETRO_EarlyHardware | Early hardware version | 📥 BIN / 📥 HEX |
⚠️ Important Notes
- 🔄 Auto-Updated: This release is automatically updated with every commit to the main branch
- 🧪 Development Build: These builds may be unstable and are intended for testing
- 📅 Last Updated: 2025-11-22T06:01:54+08:00
- 🌐 Repository: SimDevices-Project/SimGEKI
💡 Tip: For stable releases, check the official releases page.
Release v1.20250724
Release v1.20250724
欢迎稳定版本构建 v1.20250724
新功能
- 现在控制器会在一定时间内无任何输入、摇杆变化、串口信息通信或HID通信后自动关闭所有灯光，默认值为10分钟
- 加入了一些用于HID配置控制器的API，详情请参考
src/lib/hidconfig.c文件
错误修正
- 针对使用ADC输入的摇杆，修正了一个错误，该错误曾经导致摇杆获取到的数值总是固定偏大 0x0F，这个错误会影响到 SimGEKI 2，不会对 SimGETRO 产生影响
- 修正了一个错误，该错误曾经导致自检灯光的侧键以R-Y-B-W方式工作而非R-G-B-W
不兼容更改
- 现在所有HID配置均需要手动保存才会写入控制器Flash内，而非旧版本的自动保存并写入
如何更新固件？
请遵循以下链接步骤以更新您的固件：
Release v1.20250718
First Public Release!
What the firmware can do?
- IO4-like hid device simulate
- UART card Reader support by @QHPaeek
- Led board simulate
- 2 lever input modes (SPI & Analog)
How to flash?
Use this webpage https://github.com/SimDevices-Project/SimGEKI-WebControl
And follow the steps in this link https://sim.bysb.net/#/simgetro/configs/update-firmware/
