Stratasys Fortus 250mc EEPROM hack

Updated version of the tutorial from Have Blue to be used on a RPi3, with stratasys 250mc, and with the new library Stratatools Only the main differences from the tutorial are listed here.

Prepare RPI3

Change the modes of pin where it connect to chip

gpio mode 7 out
gpio write 7 1

sudo raspi-config

Interfacing Options->1-Wire->Enable

sudo modprobe w1-gpio gpiopin=4
sudo modprobe w1-ds2433

After connected to chip

cd /sys/bus/w1/devices/w1_bus_master1
ls

check for folder started with "23-00"

cd 23-0000022ebe12
xxd -p id

output of eeprom id in my case is:

2312be2e0200005a

With Stratatools installed

Create a cartridge.txt as showed in Stratatools git.

stratatools eeprom_encode -t prodigy -e 2312be2e0200005a cartridge.txt cartridge.bin

sudo cp cartridge.bin /sys/bus/w1/devices/w1_busmaster1/23-0000022ebe12/eeprom