Simple binary utilities for the Color Computer to work with the FujiNet device.

APPKEYS.BIN - Allows you to peruse the app keys created by various applications, stored on the FujiNet SD card.

CFG.BIN - Resets the drive configuration to point to the initial configuration boot disk and resets the CoCo to re-run the config program without having to power off or hit the reset button.

BASGUID.BIN - Replaces the BASIC "STOP" command with a new command, "GUID".

This command can be used at the BASIC command line or in a program. To use it, simply use the word GUID with a valid string variable name, like:

GUID G$

The G$ string variable in BASIC will be filled with a randomly generated 36 character unique ID.

NOTE: Do not use this at the same time as BASTIME, below. It is recommended that if it is used in a basic program, that the CLEAR command is used before executing it, like this:

10 CLEAR 200,&H72FF:LOADM"BASGUID":EXEC

Save the BASIC program that uses the the GUID command in ASCII (SAVE "FOO",A) during development, in case it gets loaded when BASGUID.BIN has not been installed yet.

BASTIME.BIN - Replaces the BASIC "SKIPF" command with a new command, "DATTM".

This command can be used at the BASIC command line or in a program. To use it, simply use the word DATTM with a valid string variable name, like:

DATTM D$

The D$ string variable in BASIC will be filled with the current date and time in the format YYYY-MM-DD HH:MM:SS (In 24-hour time).

NOTE: Do not use this at the same time as BASGUID, above. It is recommended that if it is used in a basic program, that the CLEAR command is used before executing it, like this:

10 CLEAR 200,&H72FF:LOADM"BASTIME":EXEC

Save the BASIC program that uses the the GUID command in ASCII (SAVE "FOO",A) during development, in case it gets loaded when BASTIME.BIN has not been installed yet.

CLOCK.BIN - A full-screen character-based clock based on the FujiNet clock. Press spacebar to switch between 12/24 hour clock, any other key to exit.

DRIVES.BIN - Prints out the current drive slot configuration, much like what you see when you exit the config program.

FNINFO.BIN - Prints out the FujiNet adapter network information and firmware version.

FUJILOGO.BIN - Just for fun. Draws a full-size FujiNet logo on the screen.

GUID.BIN - Prints out a randomly-generated GUID. (This feature is only available with the latest nightly build of the FujiNet Firmware)

HOSTS.BIN - Prints out the currently configured host slot configuration.

TIME.BIN - Prints out the current date/time. (NOTE: If you get an improper value for the year, update your firmware in the FujiNet device to the latest release or nightly build.

These files are contained on a Color Computer disk image file, fujiutil.dsk.

Building this requires a Linux system with a copy of the C compiler cmoc, found at http://sarrazip.com/dev/cmoc.html, and the lwtools assembler/linker utilities, found at http://lwtools.ca, the Color Computer toolshed, found at https://github.com/n6il/toolshed, and the fujinet-lib, found at https://github.com/FujiNetWIFI/fujinet-lib.

You will need to manually build fujinet-lib from source, because these programs use functions not yet available in the latest released version of fujinet-lib.