Skip to content

Releases: PhotoNomad0/flrig_newer

Release v2.0.10 Beta 13 with more memory channel tweaks

14 Apr 11:08
@PhotoNomad0 PhotoNomad0
v2.0.10_ftx1_beta_13
cb4dcbe

Choose a tag to compare

View all tags
Release v2.0.10 Beta 13 with more memory channel tweaks Latest
Latest

WARNING: Not an official release.

Based on flrig release sources v2.0.10.tar.gz. Added Yaesu FTX-1 support.

Usage and Screenshots:
See: https://github.com/PhotoNomad0/flrig_newer/wiki/FLRIG-FTX%E2%80%901-Instructions

Notes:

  • currently only support Optima configuration. Have not tested with Field head only.
  • the FTX-1 specific tab is experimental. If this release crashes, you can try going back to beta 2 which does not have the FTX-1 specific tab.

Two builds are included in assets below:

  • MacOS: Built on Intel Mac, but also tested on Mac M1:

    • flrig-2.0.10-ftx1.dmg

  • Windows: Built on Fedora, tested on Windows 11 VM:

    • flrig-2.0.10-ftx1_setup.exe

Changes:

  • Beta 13
    • a few memory channel tweaks
  • Beta 12
    • fixes for channel picker redraws.
  • Beta 11
    • fixes for bandwidth and noise blanker redraws.
  • Beta 10:
    • added new buttons for RX and TX audio selectors.
  • Beta 9:
    • Fixes for Bandwidth support on all modes and tracking fixes. Note that for tracking to work, you must enable BW polling (turn on under config/poll).
  • Beta 8:
    • Ruggedizing Channel Operations for null pointers and exceptions
  • Beta 7:
    • Fixing Noise Blanker (NB) support
  • Beta 6:
    • Added protection for possible null pointers
  • Beta 5:
    • extended FTX-1 tab - tweaked tooltips
  • Beta 4:
    • extended FTX-1 tab with more memory channel operations <= Mac only / broken Windows build
  • Beta 3:
    • added FTX-1 tab with memory channel operations
  • Beta 2:
    • added AGC support
  • Beta:
    • added an Yaesu FTX-1 device driver that.
Assets 4
Loading

Release v2.0.10 Beta 12 with fix for memory channel redraws

13 Apr 14:43
@PhotoNomad0 PhotoNomad0
v2.0.10_ftx1_beta_12
6ae000b

Choose a tag to compare

View all tags
Release v2.0.10 Beta 12 with fix for memory channel redraws Pre-release
Pre-release

WARNING: Not an official release.

Based on flrig release sources v2.0.10.tar.gz. Added Yaesu FTX-1 support.

Usage and Screenshots:
See: https://github.com/PhotoNomad0/flrig_newer/wiki/FLRIG-FTX%E2%80%901-Instructions

Notes:

  • currently only support Optima configuration. Have not tested with Field head only.
  • the FTX-1 specific tab is experimental. If this release crashes, you can try going back to beta 2 which does not have the FTX-1 specific tab.

Two builds are included in assets below:

  • MacOS: Built on Intel Mac, but also tested on Mac M1:

    • flrig-2.0.10-ftx1.dmg

  • Windows: Built on Fedora, tested on Windows 11 VM:

    • flrig-2.0.10-ftx1_setup.exe

Changes:

  • Beta 12
    • fixes for channel picker redraws.
  • Beta 11
    • fixes for bandwidth and noise blanker redraws.
  • Beta 10:
    • added new buttons for RX and TX audio selectors.
  • Beta 9:
    • Fixes for Bandwidth support on all modes and tracking fixes. Note that for tracking to work, you must enable BW polling (turn on under config/poll).
  • Beta 8:
    • Ruggedizing Channel Operations for null pointers and exceptions
  • Beta 7:
    • Fixing Noise Blanker (NB) support
  • Beta 6:
    • Added protection for possible null pointers
  • Beta 5:
    • extended FTX-1 tab - tweaked tooltips
  • Beta 4:
    • extended FTX-1 tab with more memory channel operations <= Mac only / broken Windows build
  • Beta 3:
    • added FTX-1 tab with memory channel operations
  • Beta 2:
    • added AGC support
  • Beta:
    • added an Yaesu FTX-1 device driver that.
Loading

Release v2.0.10 Beta 11 with fix for BW redraws

09 Apr 14:12
@PhotoNomad0 PhotoNomad0
v2.0.10_ftx1_beta_11
1d703c6

Choose a tag to compare

View all tags
Release v2.0.10 Beta 11 with fix for BW redraws

WARNING: Not an official release.

Based on flrig release sources v2.0.10.tar.gz. Added Yaesu FTX-1 support.

Usage and Screenshots:
See: https://github.com/PhotoNomad0/flrig_newer/wiki/FLRIG-FTX%E2%80%901-Instructions

Notes:

  • currently only support Optima configuration. Have not tested with Field head only.
  • the FTX-1 specific tab is experimental. If this release crashes, you can try going back to beta 2 which does not have the FTX-1 specific tab.

Two builds are included in assets below:

  • MacOS: Built on Intel Mac, but also tested on Mac M1:

    • flrig-2.0.10-ftx1.dmg

  • Windows: Built on Fedora, tested on Windows 11 VM:

    • flrig-2.0.10-ftx1_setup.exe

Changes:

  • Beta 11
    • fixes for bandwidth and noise blanker redraws.
  • Beta 10:
    • added new buttons for RX and TX audio selectors.
  • Beta 9:
    • Fixes for Bandwidth support on all modes and tracking fixes. Note that for tracking to work, you must enable BW polling (turn on under config/poll).
  • Beta 8:
    • Ruggedizing Channel Operations for null pointers and exceptions
  • Beta 7:
    • Fixing Noise Blanker (NB) support
  • Beta 6:
    • Added protection for possible null pointers
  • Beta 5:
    • extended FTX-1 tab - tweaked tooltips
  • Beta 4:
    • extended FTX-1 tab with more memory channel operations <= Mac only / broken Windows build
  • Beta 3:
    • added FTX-1 tab with memory channel operations
  • Beta 2:
    • added AGC support
  • Beta:
    • added an Yaesu FTX-1 device driver that.
Loading

Release v2.0.10 Beta 10 with RX and TX audio selectors

08 Apr 23:34
@PhotoNomad0 PhotoNomad0
v2.0.10_ftx1_beta_10
4e83a7e

Choose a tag to compare

View all tags
Release v2.0.10 Beta 10 with RX and TX audio selectors Pre-release
Pre-release

WARNING: Not an official release.

Based on flrig release sources v2.0.10.tar.gz. Added Yaesu FTX-1 support.

Usage and Screenshots:
See: https://github.com/PhotoNomad0/flrig_newer/wiki/FLRIG-FTX%E2%80%901-Instructions

Notes:

  • currently only support Optima configuration. Have not tested with Field head only.
  • the FTX-1 specific tab is experimental. If this release crashes, you can try going back to beta 2 which does not have the FTX-1 specific tab.

Two builds are included in assets below:

  • MacOS: Built on Intel Mac, but also tested on Mac M1:

    • flrig-2.0.10-ftx1.dmg

  • Windows: Built on Fedora, tested on Windows 11 VM:

    • flrig-2.0.10-ftx1_setup.exe

Changes:

  • Beta 10:
    • added new buttons for RX and TX audio selectors.
  • Beta 9:
    • Fixes for Bandwidth support on all modes and tracking fixes. Note that for tracking to work, you must enable BW polling (turn on under config/poll).
  • Beta 8:
    • Ruggedizing Channel Operations for null pointers and exceptions
  • Beta 7:
    • Fixing Noise Blanker (NB) support
  • Beta 6:
    • Added protection for possible null pointers
  • Beta 5:
    • extended FTX-1 tab - tweaked tooltips
  • Beta 4:
    • extended FTX-1 tab with more memory channel operations <= Mac only / broken Windows build
  • Beta 3:
    • added FTX-1 tab with memory channel operations
  • Beta 2:
    • added AGC support
  • Beta:
    • added an Yaesu FTX-1 device driver that.
Loading

Release v2.0.10 Beta 9 with BandWidth Fixes

08 Apr 09:32
@PhotoNomad0 PhotoNomad0
v2.0.10_ftx1_beta_9
ec08a73

Choose a tag to compare

View all tags
Release v2.0.10 Beta 9 with BandWidth Fixes Pre-release
Pre-release

WARNING: Not an official release.

Based on flrig release sources v2.0.10.tar.gz. Added Yaesu FTX-1 support.

Usage and Screenshots:
See: https://github.com/PhotoNomad0/flrig_newer/wiki/FLRIG-FTX%E2%80%901-Instructions

Notes:

  • currently only support Optima configuration. Have not tested with Field head only.
  • the FTX-1 specific tab is experimental. If this release crashes, you can try going back to beta 2 which does not have the FTX-1 specific tab.

Two builds are included in assets below:

  • MacOS: Built on Intel Mac, but also tested on Mac M1:

    • flrig-2.0.10-ftx1.dmg

  • Windows: Built on Fedora, tested on Windows 11 VM:

    • flrig-2.0.10-ftx1_setup.exe

Changes:

  • Beta 9:
    • Fixes for Bandwidth support on all modes and tracking fixes. Note that for tracking to work, you must enable BW polling (turn on under config/poll).
  • Beta 8:
    • Ruggedizing Channel Operations for null pointers and exceptions
  • Beta 7:
    • Fixing Noise Blanker (NB) support
  • Beta 6:
    • Added protection for possible null pointers
  • Beta 5:
    • extended FTX-1 tab - tweaked tooltips
  • Beta 4:
    • extended FTX-1 tab with more memory channel operations <= Mac only / broken Windows build
  • Beta 3:
    • added FTX-1 tab with memory channel operations
  • Beta 2:
    • added AGC support
  • Beta:
    • added an Yaesu FTX-1 device driver that.
Loading

Release v2.0.10 Beta 8 with Ruggedizing Channel Operations

05 Apr 13:47
@PhotoNomad0 PhotoNomad0
v2.0.10_ftx1_beta_8B
833d553
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Verified
Learn about vigilant mode.

Choose a tag to compare

View all tags
Release v2.0.10 Beta 8 with Ruggedizing Channel Operations

WARNING: Not an official release.

Based on flrig release sources v2.0.10.tar.gz. Added Yaesu FTX-1 support.

Usage and Screenshots:
See: https://github.com/PhotoNomad0/flrig_newer/wiki/FLRIG-FTX%E2%80%901-Instructions

Notes:

  • currently only support Optima configuration. Have not tested with Field head only.
  • the FTX-1 specific tab is experimental. If this release crashes, you can try going back to beta 2 which does not have the FTX-1 specific tab.

Two builds are included in assets below:

  • MacOS: Built on Intel Mac, but also tested on Mac M1:

    • flrig-2.0.10-ftx1.dmg

  • Windows: Built on Fedora, tested on Windows 11 VM:

    • flrig-2.0.10-ftx1_setup.exe

Changes:

  • Beta 8:
    • Ruggedizing Channel Operations for null pointers and exceptions
  • Beta 7:
    • Fixing Noise Blanker (NB) support
  • Beta 6:
    • Added protection for possible null pointers
  • Beta 5:
    • extended FTX-1 tab - tweaked tooltips
  • Beta 4:
    • extended FTX-1 tab with more memory channel operations <= Mac only / broken Windows build
  • Beta 3:
    • added FTX-1 tab with memory channel operations
  • Beta 2:
    • added AGC support
  • Beta:
    • added an Yaesu FTX-1 device driver that.
Loading

Release v2.0.10 Beta 7 with NB fix

03 Apr 12:34
@PhotoNomad0 PhotoNomad0
v2.0.10_ftx1_beta_7
a8ebf45
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Verified
Learn about vigilant mode.

Choose a tag to compare

View all tags
Release v2.0.10 Beta 7 with NB fix

WARNING: Not an official release.

Based on flrig release sources v2.0.10.tar.gz. Added Yaesu FTX-1 support.

Usage and Screenshots:
See: https://github.com/PhotoNomad0/flrig_newer/wiki/FLRIG-FTX%E2%80%901-Instructions

Notes:

  • currently only support Optima configuration. Have not tested with Field head only.
  • the FTX-1 specific tab is experimental. If this release crashes, you can try going back to beta 2 which does not have the FTX-1 specific tab.

Two builds are included in assets below:

  • MacOS: Built on Intel Mac, but also tested on Mac M1:

    • flrig-2.0.10-ftx1.dmg

  • Windows: Built on Fedora, tested on Windows 11 VM:

    • flrig-2.0.10-ftx1_setup.exe

Changes:

  • Beta 7:
    • Fixing Noise Blanker (NB) support
  • Beta 6:
    • Added protection for possible null pointers
  • Beta 5:
    • extended FTX-1 tab - tweaked tooltips
  • Beta 4:
    • extended FTX-1 tab with more memory channel operations <= Mac only / broken Windows build
  • Beta 3:
    • added FTX-1 tab with memory channel operations
  • Beta 2:
    • added AGC support
  • Beta:
    • added an Yaesu FTX-1 device driver that.
Loading

Release v2.0.10 Beta 6 with added Yaesu FTX-1 support

01 Apr 11:28
@PhotoNomad0 PhotoNomad0
v2.0.10_ftx1_beta_6
5ace944

Choose a tag to compare

View all tags
Release v2.0.10 Beta 6 with added Yaesu FTX-1 support Pre-release
Pre-release

WARNING: Not an official release.

Based on flrig release sources v2.0.10.tar.gz. Added Yaesu FTX-1 support.

Usage and Screenshots:
See: https://github.com/PhotoNomad0/flrig_newer/wiki/FLRIG-FTX%E2%80%901-Instructions

Notes:

  • currently only support Optima configuration. Have not tested with Field head only.
  • the FTX-1 specific tab is experimental. If this release crashes, you can try going back to beta 2 which does not have the FTX-1 specific tab.

Two builds are included in assets below:

  • MacOS: Built on Intel Mac, but also tested on Mac M1:

    • flrig-2.0.10-ftx1.dmg

  • Windows: Built on Fedora, tested on Windows 11 VM:

    • flrig-2.0.10-ftx1_setup.exe <= broken missing null pointer fixes

Changes:

  • Beta 6:
    • Added protection for possible null pointers
  • Beta 5:
    • extended FTX-1 tab - tweaked tooltips
  • Beta 4:
    • extended FTX-1 tab with more memory channel operations <= broken Windows build
  • Beta 3:
    • added FTX-1 tab with memory channel operations
  • Beta 2:
    • added AGC support
  • Beta:
    • added an Yaesu FTX-1 device driver that.
Loading

Release v2.0.10 Beta 5 with added Yaesu FTX-1 support

30 Mar 12:55
@PhotoNomad0 PhotoNomad0
v2.0.10_ftx1_beta_5
327ab8c

Choose a tag to compare

View all tags
Release v2.0.10 Beta 5 with added Yaesu FTX-1 support

WARNING: Not an official release.

Based on flrig release sources v2.0.10.tar.gz. Added Yaesu FTX-1 support.

Usage and Screenshots:
See: https://github.com/PhotoNomad0/flrig_newer/wiki/FLRIG-FTX%E2%80%901-Instructions

Notes:

  • currently only support Optima configuration. Have not tested with Field head only.
  • the FTX-1 specific tab is experimental. If this release crashes, you can try going back to beta 2 which does not have the FTX-1 specific tab.

Two builds are included in assets below:

  • MacOS: Built on Intel Mac, but also tested on Mac M1:

    • flrig-2.0.10-ftx1.dmg

  • Windows: Built on Fedora, tested on Windows 11 VM:

    • flrig-2.0.10-ftx1_setup.exe

Changes:

  • Beta 5:
    • extended FTX-1 tab - tweaked tooltips
  • Beta 4:
    • extended FTX-1 tab with more memory channel operations
  • Beta 3:
    • added FTX-1 tab with memory channel operations
  • Beta 2:
    • added AGC support
  • Beta:
    • added an Yaesu FTX-1 device driver that.
Loading

Edit Release v2.0.10 Beta 4 with added Yaesu FTX-1 support

22 Mar 19:35
@PhotoNomad0 PhotoNomad0
v2.0.10_ftx1_beta_4
318e44f

Choose a tag to compare

View all tags
Edit Release v2.0.10 Beta 4 with added Yaesu FTX-1 support Pre-release
Pre-release

WARNING: Not an official release.

Based on flrig release sources v2.0.10 tar.qz. Added Yaesu FTX-1 support

Notes:

  • currently only support Optima configuration. Have not tested with Field head only.
  • the FTX-1 specific tab is experimental. If this release crashes, you can try going back to beta 2 which does not have the FTX-1 specific tab.

Two builds are included:

  • MacOS: Built on Intel Mac, but also tested on Mac M1:

    • flrig-2.0.10-ftx1.dmg

  • Windows: Built on Fedora, tested on Windows 11 (this is the preferred Windows build):

    • flrig-2.0.10_ftx1_setup.exe <= broken

Changes:

  • Beta 4:
    • extended FTX-1 tab with more memory channel operations
  • Beta 3:
    • added FTX-1 tab with memory channel operations
  • Beta 2:
    • added AGC support
  • Beta:
    • added an Yaesu FTX-1 device driver that.

Usage:

Under Config/Setup/Transceiver select FTX-1 for rig.

Loading