Add Icinga2 check_smart CheckCommand definition

contrib/icinga2-command.conf

@@ -0,0 +1,88 @@
+/*
+ * Icinga2 CheckCommand definition for check_smart (check_smart.pl) monitoring plugin
+ * See https://www.claudiokuenzler.com/monitoring-plugins/check_smart.php
+*/
+
+object CheckCommand "check_smart" {
+	command = [ PluginContribDir + "/check_smart.pl" ]
+
+	arguments = {
+		"-d" = {
+			value = "$smart_device$"
+			set_if = {{ macro("$smart_device_is_glob$") == false }}
+			description = "A physical block device to be SMART monitored, eg /dev/sda."
+		}
+		"-g" = {
+			value = "$smart_device$"
+			set_if = {{ macro("$smart_device_is_glob$") == true }}
+			description = "A glob expression of physical devices to be monitored, eg -g '/dev/sd[a-z]'."
+		}
+		"-i" = {
+			value = "$smart_interface$"
+			description = "Drive's interface type, must be one of: auto, ata, scsi, nvme, 3ware,N, areca,N, hpt,L/M/N, cciss,N, megaraid,N."
+			required = true
+		}
+		"-r" = {
+			value = "$smart_raw_list$"
+			description = "List (comma separated, without spaces!) of SMART attributes to check for their raw values."
+		}
+		"-e" = {
+			value = "$smart_exclude_list$"
+			description = "List of (comma separated) SMART attributes which should be excluded (=ignored) from checks, but still appear in perfdata."
+		}
+		"-E" = {
+			value = "$smart_exclude_all_list$"
+			description = "List of (comma separated) SMART attributes which should be excluded (=ignored) completely from checks and perfdata."
+		}
+		"-b" = {
+			value = "$smart_bad$"
+			description = "Threshold value (integer) when to warn for N bad entries (ATA: Current Pending Sector, SCSI: Grown defect list). Note: Deprecated for ATA drives, use `smart_warn` instead. Continue to use this for SCSI drives."
+		}
+		"-w" = {
+			value = "$smart_warn$"
+			description = "Comma separated list of thresholds for ATA drives (e.g. `'Reallocated_Sector_Ct=10,Current_Pending_Sector=62'`)."
+		}
+		"-s" = {
+			set_if = "$smart_selftest$"
+			description = "If set to true, additionally check SMART's selftest log for errors."
+		}
+		"-l" = {
+			set_if = "$smart_ssd_lifetime$"
+			description = "If set to true, additionally check SSD attribute Percent_Lifetime_Remain."
+		}
+		"-O" = {
+			set_if = "$smart_oldage$"
+			description = "If set to true, ignore certain oldage attributes related to the drive's usage (not recommended)."
+		}
+		"-q" = {
+			set_if = "$smart_quiet$"
+			description = "If set to true, only show failing drive(s) when faults are detected (only affects output when used with `vars.smart_device_is_glob`)."
+		}
+		"--hide-sn" = {
+			set_if = "$smart_hide_sn$"
+			description = "If set to true, output does not reveal serial number of drive(s)."
+		}
+		"--skip-self-assessment" = {
+			set_if = "$smart_skip_self_assessment$"
+			description = "If set to true, skip the SMART self assessment health check (not recommended)."
+		}
+		"--skip-temp-check" = {
+			set_if = "$smart_skip_temp_check$"
+			description = "If set to true, skip temperature comparison current vs. drive max temperature (not recommended)."
+		}
+		"--skip-load-cycles" = {
+			set_if = "$smart_skip_load_cycles$"
+			description = "If set to true, skip check of SMART attribute 193 (Load_Cycle_Count), deemed unsafe after reaching 600K load/unload cycles."
+		}
+		"--skip-error-log" = {
+			set_if = "$smart_skip_error_log$"
+			description = "If set to true, skip check of SMART Error Log (not recommended)."
+		}
+	}
+
+	vars.smart_interface = "auto"
+	vars.smart_device_is_glob = false
+	vars.smart_selftest = false
+	vars.smart_ssd_lifetime = false
+	vars.smart_quiet = false
+}