Bump urllib3 from 2.2.3 to 2.6.3 in /.ci/metrics

[dependabot]

Bumps urllib3 from 2.2.3 to 2.6.3.

Release notes

Sourced from urllib3's releases.

2.6.3

🚀 urllib3 is fundraising for HTTP/2 support

urllib3 is raising ~$40,000 USD to release HTTP/2 support and ensure long-term sustainable maintenance of the project after a sharp decline in financial support. If your company or organization uses Python and would benefit from HTTP/2 support in Requests, pip, cloud SDKs, and thousands of other projects please consider contributing financially to ensure HTTP/2 support is developed sustainably and maintained for the long-haul.

Thank you for your support.

Changes

• Fixed a security issue where decompression-bomb safeguards of the streaming API were bypassed when HTTP redirects were followed. (CVE-2026-21441 reported by @​D47A, 8.9 High, GHSA-38jv-5279-wg99)
• Started treating Retry-After times greater than 6 hours as 6 hours by default. (urllib3/urllib3#3743)
• Fixed urllib3.connection.VerifiedHTTPSConnection on Emscripten. (urllib3/urllib3#3752)

2.6.2

🚀 urllib3 is fundraising for HTTP/2 support

urllib3 is raising ~$40,000 USD to release HTTP/2 support and ensure long-term sustainable maintenance of the project after a sharp decline in financial support. If your company or organization uses Python and would benefit from HTTP/2 support in Requests, pip, cloud SDKs, and thousands of other projects please consider contributing financially to ensure HTTP/2 support is developed sustainably and maintained for the long-haul.

Thank you for your support.

Changes

• Fixed HTTPResponse.read_chunked() to properly handle leftover data in the decoder's buffer when reading compressed chunked responses. (urllib3/urllib3#3734)

2.6.1

🚀 urllib3 is fundraising for HTTP/2 support

urllib3 is raising ~$40,000 USD to release HTTP/2 support and ensure long-term sustainable maintenance of the project after a sharp decline in financial support. If your company or organization uses Python and would benefit from HTTP/2 support in Requests, pip, cloud SDKs, and thousands of other projects please consider contributing financially to ensure HTTP/2 support is developed sustainably and maintained for the long-haul.

Thank you for your support.

Changes

• Restore previously removed HTTPResponse.getheaders() and HTTPResponse.getheader() methods. (#3731)

2.6.0

🚀 urllib3 is fundraising for HTTP/2 support

urllib3 is raising ~$40,000 USD to release HTTP/2 support and ensure long-term sustainable maintenance of the project after a sharp decline in financial support. If your company or organization uses Python and would benefit from HTTP/2 support in Requests, pip, cloud SDKs, and thousands of other projects please consider contributing financially to ensure HTTP/2 support is developed sustainably and maintained for the long-haul.

Thank you for your support.

Security

• Fixed a security issue where streaming API could improperly handle highly compressed HTTP content ("decompression bombs") leading to excessive resource consumption even when a small amount of data was requested. Reading small chunks of compressed data is safer and much more efficient now. (CVE-2025-66471 reported by @​Cycloctane, 8.9 High, GHSA-2xpw-w6gg-jr37)
• Fixed a security issue where an attacker could compose an HTTP response with virtually unlimited links in the Content-Encoding header, potentially leading to a denial of service (DoS) attack by exhausting system resources during decoding. The number of allowed chained encodings is now limited to 5. (CVE-2025-66418 reported by @​illia-v, 8.9 High, GHSA-gm62-xv2j-4w53)

[!IMPORTANT]

• If urllib3 is not installed with the optional urllib3[brotli] extra, but your environment contains a Brotli/brotlicffi/brotlipy package anyway, make sure to upgrade it to at least Brotli 1.2.0 or brotlicffi 1.2.0.0 to benefit from the security fixes and avoid warnings. Prefer using urllib3[brotli] to install a compatible Brotli package automatically.

... (truncated)

Changelog

Sourced from urllib3's changelog.

2.6.3 (2026-01-07)

• Fixed a high-severity security issue where decompression-bomb safeguards of the streaming API were bypassed when HTTP redirects were followed. (GHSA-38jv-5279-wg99 <https://github.com/urllib3/urllib3/security/advisories/GHSA-38jv-5279-wg99>__)
• Started treating Retry-After times greater than 6 hours as 6 hours by default. ([#3743](https://github.com/urllib3/urllib3/issues/3743) <https://github.com/urllib3/urllib3/issues/3743>__)
• Fixed urllib3.connection.VerifiedHTTPSConnection on Emscripten. ([#3752](https://github.com/urllib3/urllib3/issues/3752) <https://github.com/urllib3/urllib3/issues/3752>__)

2.6.2 (2025-12-11)

• Fixed HTTPResponse.read_chunked() to properly handle leftover data in the decoder's buffer when reading compressed chunked responses. ([#3734](https://github.com/urllib3/urllib3/issues/3734) <https://github.com/urllib3/urllib3/issues/3734>__)

2.6.1 (2025-12-08)

• Restore previously removed HTTPResponse.getheaders() and HTTPResponse.getheader() methods. ([#3731](https://github.com/urllib3/urllib3/issues/3731) <https://github.com/urllib3/urllib3/issues/3731>__)

2.6.0 (2025-12-05)

Security

• Fixed a security issue where streaming API could improperly handle highly compressed HTTP content ("decompression bombs") leading to excessive resource consumption even when a small amount of data was requested. Reading small chunks of compressed data is safer and much more efficient now. (GHSA-2xpw-w6gg-jr37 <https://github.com/urllib3/urllib3/security/advisories/GHSA-2xpw-w6gg-jr37>__)
• Fixed a security issue where an attacker could compose an HTTP response with virtually unlimited links in the Content-Encoding header, potentially leading to a denial of service (DoS) attack by exhausting system resources during decoding. The number of allowed chained encodings is now limited to 5. (GHSA-gm62-xv2j-4w53 <https://github.com/urllib3/urllib3/security/advisories/GHSA-gm62-xv2j-4w53>__)

.. caution::

• If urllib3 is not installed with the optional urllib3[brotli] extra, but your environment contains a Brotli/brotlicffi/brotlipy package anyway, make sure to upgrade it to at least Brotli 1.2.0 or brotlicffi 1.2.0.0 to benefit from the security fixes and avoid warnings. Prefer using

... (truncated)

Commits

• 0248277 Release 2.6.3
• 8864ac4 Merge commit from fork
• 70cecb2 Fix Scorecard issues related to vulnerable dev dependencies (#3755)
• 41f249a Move "v2.0 Migration Guide" to the end of the table of contents (#3747)
• fd4dffd Patch VerifiedHTTPSConnection for Emscripten (#3752)
• 13f0bfd Handle massive values in Retry-After when calculating time to sleep for (#3743)
• 8c480bf Bump actions/upload-artifact from 5.0.0 to 6.0.0 (#3748)
• 4b40616 Bump actions/cache from 4.3.0 to 5.0.1 (#3750)
• 82b8479 Bump actions/download-artifact from 6.0.0 to 7.0.0 (#3749)
• 34284cb Mention experimental features in the security policy (#3746)
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
  You can disable automated security fix PRs for this repo from the Security Alerts page.

[github-actions]

Thank you for submitting a Pull Request (PR) to the LLVM Project!

This PR will be automatically labeled and the relevant teams will be notified.

If you wish to, you can add reviewers by using the "Reviewers" section on this page.

If this is not working for you, it is probably because you do not have write permissions for the repository. In which case you can instead tag reviewers by name in a comment by using @ followed by their GitHub username.

If you have received no comments on your PR for a week, you can request a review by "ping"ing the PR by adding a comment “Ping”. The common courtesy "ping" rate is once a week. Please remember that you are asking for valuable time from other developers.

If you have further questions, they may be answered by the LLVM GitHub User Guide.

You can also ask questions in a comment on this PR, on the LLVM Discord or on the forums.