[linux] Make BLE connection retry on SW connection abort error#20
Open
[linux] Make BLE connection retry on SW connection abort error#20
Conversation
Damian-Nordic
approved these changes
May 9, 2022
src/platform/Linux/bluez/Helper.cpp
Outdated
Collaborator
There was a problem hiding this comment.
I would suggest removing the strstr check and handle all IO errors that way, but adding some max number of attempts (so that the controller doesn't get stuck if some real hardware failure occurs).
Collaborator
Damian-Nordic
left a comment
Damian-Nordic
left a comment
There was a problem hiding this comment.
Thanks for that by the way! :)
…ect-chip#18178) Adds a key generator that the test files can share.
…of the SystemCommand simulated cluster (project-chip#18038) * [YAML] Fix a typo in src/app/zap-templates/common/simulated-clusters/clusters/DiscoveryCommands.js * [YAML] Generate TLV parameters for the simulated clusters * Update src/app/tests/suites/commands/delay/DelayCommands.* * Update Update src/app/tests/suites/commands/log/LogCommands.* * Update src/app/tests/suites/commands/commissioner/CommissionerCommands.* * Update src/app/tests/suites/commands/discovery/DiscoveryCommands.* * Update src/app/tests/suites/commands/system/SystemCommands.* * Update chip-tool for the API changes * Update chip-tool-darwin * Update generated content * [YAML] Add minCommissioningTimeout option to SystemCommands::Start * Add min commissioning timeout into the SystemCommands tests
* [sleepy] Initial rename of CRA/CRI to SAI/SII. * [sleepy] More CRA/CRI -> SAI/SII rename. * [sleepy] Update comments per review. * [sleepy] Test mainline case: SAI < SII. * [sleepy] Fix test after SAI < SII.
…chip#18221) Allows us to remove the in-framework key generation bits.
* [chip-tool-darwin] Enable TestSystemCommands * Update generated test code
…roject-chip#18079) * [OTA] NotifyUpdateApplied to be sent after device first reboot into new image - Added IsFirstRun and ConfirmCurrentImage checks - Currently added delay of 15seconds in example_matter to give time for ameba to obtain ipv6 address - TODO: Need to move wlan fast connect into matter using DCT * Restyled by clang-format Co-authored-by: Restyled.io <commits@restyled.io>
…roject-chip#17935) * [coverage] Add use_coverage flag to add --coverage to clang builds. * [coverage] Add -o option to run lcov in a prebuilt output directory. * [coverage] Fixes for review comments. * [coverage] Rephrase use_coverage comment.
…ect-chip#18220) The Darwin codegen was only generating things for clusters/commands/attributes enabled in controller-clusters.zap. We should generate for everything instead.
Signed-off-by: Marcin Kajor <marcin.kajor@nordicsemi.no>
Damian-Nordic
approved these changes
May 10, 2022
* Chef - Add stateful_shell.py and constants.py Change-Id: Ia59a3d2a71204e4af2c41d6192d47f048a58c3b4 * Chef - Print splash text Change-Id: I9b162cabab700e87f12806668b2953bf57348449 * Chef - Use textwrap.dedent on textblocks Change-Id: I861f24ac20d440cf4a3e605809421a766ecdd476 * Chef - Remove use of commandQueue Change-Id: I75d5ae6fea25c6b933cb9823a29e9c2224b8188d * Chef - Replace shell writes with Python open() calls Change-Id: I0147fa6b96d3a15bf95352acbd136e8f1e648b8f * Chef - Make paths into global constants Change-Id: Ib177d584bcd463aaafe10f4f338a90d6b234c3f1 * Chef - Remove HexInputToInt Change-Id: Iebe5e76c169951e842262530d3feba5ac899a33c * Chef - Remove unused statements Change-Id: I56670e31722348fb47a1e59d2651cdcf3f983e28 * Chef - Convert variables to snake case per PEP8 Change-Id: I52520eec1dfb8093c39ce4570aa99cdd0b0d854a * Chef - Add function type hinting Change-Id: Ib82f0bf4752819b65d2c76058429931c6986bd83
…sters-app (project-chip#17833) * [examples] Fix GeneratedCommandList and AcceptedCommandList * Run Codegen * Fix test case -- yes, it should contain 8 * Fix Test - Run Codegen * Fix generated code format
Add some APIs for length constraints. Use them in system module and in cluster to enforce length constraints.
…roject-chip#18209) when doing YAML generation. The YAML codegen was only allowing attributes/commands that were enabled in controller-clusters.zap. It should just allow all known attributes/commands.
Attribute filters are not actually used anymore.
… instead of a global prerequisite for tizen (project-chip#18263)
project-chip#18130) * Skip SetCurrentHeapHighWatermark if GetCurrentHeapUsed is not implemented * Address review comment
…ip#18125) In the OpenSSL Implementation of ValidateCertificateChain() function the intermediate ceritificate is loaded as a trusted certificate, which opens door to various security attacks. Updated implementation: now loading intermediate certificate as untrusted certificate part of cert chain. Added test case that would identify this issue in the previous implementation.
* address media test case issues * address issue 17896 * address issue 17902 * address issue 17845 * attempt to fix test suites * Restyle address media test case issues (project-chip#18159) * Restyled by google-java-format * Restyled by clang-format * Restyled by prettier-markdown Co-authored-by: Restyled.io <commits@restyled.io> * address feedback, fix ACL persistence regression * fix typo * Restyled by prettier-markdown (project-chip#18215) Co-authored-by: Restyled.io <commits@restyled.io> * fix spelling * address feedback * address feedback * undo changes * Restyled by clang-format (project-chip#18231) Co-authored-by: Restyled.io <commits@restyled.io> * address feedback * Restyled by clang-format (project-chip#18254) Co-authored-by: Restyled.io <commits@restyled.io> * Update src/controller/CHIPDeviceControllerSystemState.h Co-authored-by: Boris Zbarsky <bzbarsky@apple.com> Co-authored-by: restyled-io[bot] <32688539+restyled-io[bot]@users.noreply.github.com> Co-authored-by: Restyled.io <commits@restyled.io> Co-authored-by: Boris Zbarsky <bzbarsky@apple.com>
Signed-off-by: Lukasz Duda <lukasz.duda@nordicsemi.no>
LuDuda
pushed a commit
that referenced
this pull request
Nov 29, 2022
It's not safe to access line editing state from the IO thread while
inside readline() on the main thread.
Remove the code that attempts to redraw readline after printing logs.
This avoids segfaults during logging at the cost of those logs
overwriting the prompt (this is not trivial to fix as readline
is a blocking API).
==================
WARNING: ThreadSanitizer: data race (pid=63005)
Write of size 1 at 0x55f81c7745ff by main thread:
#0 InteractiveStartCommand::ParseCommand(char*) ../../examples/chip-tool/commands/interactive/InteractiveCommands.cpp:127 (chip-tool+0x874911)
#1 InteractiveStartCommand::RunCommand() ../../examples/chip-tool/commands/interactive/InteractiveCommands.cpp:85 (chip-tool+0x874594)
#2 CHIPCommand::StartWaiting(std::chrono::duration<unsigned int, std::ratio<1l, 1000l> >) ../../examples/chip-tool/commands/common/CHIPCommand.cpp:408 (chip-tool+0x83e478)
#3 CHIPCommand::Run() ../../examples/chip-tool/commands/common/CHIPCommand.cpp:187 (chip-tool+0x83c839)
#4 Commands::RunCommand(int, char**, bool) ../../examples/chip-tool/commands/common/Commands.cpp:147 (chip-tool+0x85d4f7)
#5 Commands::Run(int, char**) ../../examples/chip-tool/commands/common/Commands.cpp:51 (chip-tool+0x85c288)
#6 main <null> (chip-tool+0x569c0a)
Previous read of size 1 at 0x55f81c7745ff by thread T5 (mutexes: write M185):
#0 LoggingCallback ../../examples/chip-tool/commands/interactive/InteractiveCommands.cpp:46 (chip-tool+0x874479)
#1 chip::Logging::LogV(unsigned char, unsigned char, char const*, __va_list_tag*) ../../src/lib/support/logging/CHIPLogging.cpp:221 (chip-tool+0x8ee4dc)
#2 chip::Logging::Log(unsigned char, unsigned char, char const*, ...) ../../src/lib/support/logging/CHIPLogging.cpp:172 (chip-tool+0x8ee30a)
#3 chip::app::ReadClient::RefreshLivenessCheckTimer() <null> (chip-tool+0x8b1746)
#4 chip::app::ReadClient::ProcessSubscribeResponse(chip::System::PacketBufferHandle&&) ../../src/app/ReadClient.cpp:845 (chip-tool+0x8b20ec)
#5 chip::app::ReadClient::OnMessageReceived(chip::Messaging::ExchangeContext*, chip::PayloadHeader const&, chip::System::PacketBufferHandle&&) ../../src/app/ReadClient.cpp:409 (chip-tool+0x8ae2a4)
#6 chip::Messaging::ExchangeContext::HandleMessage(unsigned int, chip::PayloadHeader const&, chip::BitFlags<chip::Messaging::MessageFlagValues, unsigned int>, chip::System::PacketBufferHandle&&) <null> (chip-tool+0xa0517a)
#7 operator()<chip::Messaging::ExchangeContext> ../../src/messaging/ExchangeMgr.cpp:219 (chip-tool+0xa08c73)
#8 Call ../../src/lib/support/Pool.h:126 (chip-tool+0xa0912d)
#9 chip::internal::HeapObjectList::ForEachNode(void*, chip::Loop (*)(void*, void*)) ../../src/lib/support/Pool.cpp:127 (chip-tool+0x8ee05a)
#10 ForEachActiveObject<chip::Messaging::ExchangeManager::OnMessageReceived(const chip::PacketHeader&, const chip::PayloadHeader&, const chip::SessionHandle&, chip::SessionMessageDelegate::DuplicateMessage, chip::System::PacketBufferHandle&&)::<lambda(auto:2*)> > ../../src/lib/support/Pool.h:396 (chip-tool+0xa08d10)
#11 chip::Messaging::ExchangeManager::OnMessageReceived(chip::PacketHeader const&, chip::PayloadHeader const&, chip::SessionHandle const&, chip::SessionMessageDelegate::DuplicateMessage, chip::System::PacketBufferHandle&&) ../../src/messaging/ExchangeMgr.cpp:212 (chip-tool+0xa07e91)
#12 chip::SessionManager::SecureUnicastMessageDispatch(chip::PacketHeader const&, chip::Transport::PeerAddress const&, chip::System::PacketBufferHandle&&) ../../src/transport/SessionManager.cpp:616 (chip-tool+0xa1548b)
#13 chip::SessionManager::OnMessageReceived(chip::Transport::PeerAddress const&, chip::System::PacketBufferHandle&&) ../../src/transport/SessionManager.cpp:443 (chip-tool+0xa14426)
#14 chip::TransportMgrBase::HandleMessageReceived(chip::Transport::PeerAddress const&, chip::System::PacketBufferHandle&&) ../../src/transport/TransportMgrBase.cpp:76 (chip-tool+0xa17dfa)
#15 chip::Transport::Base::HandleMessageReceived(chip::Transport::PeerAddress const&, chip::System::PacketBufferHandle&&) ../../src/transport/raw/Base.h:102 (chip-tool+0xb19728)
#16 chip::Transport::UDP::OnUdpReceive(chip::Inet::UDPEndPoint*, chip::System::PacketBufferHandle&&, chip::Inet::IPPacketInfo const*) ../../src/transport/raw/UDP.cpp:122 (chip-tool+0xb1a48b)
#17 chip::Inet::UDPEndPointImplSockets::HandlePendingIO(chip::BitFlags<chip::System::SocketEventFlags, unsigned char>) ../../src/inet/UDPEndPointImplSockets.cpp:688 (chip-tool+0xb00aa0)
#18 chip::Inet::UDPEndPointImplSockets::HandlePendingIO(chip::BitFlags<chip::System::SocketEventFlags, unsigned char>, long) ../../src/inet/UDPEndPointImplSockets.cpp:569 (chip-tool+0xafff89)
#19 chip::System::LayerImplSelect::HandleEvents() ../../src/system/SystemLayerImplSelect.cpp:406 (chip-tool+0xb07563)
#20 chip::DeviceLayer::Internal::GenericPlatformManagerImpl_POSIX<chip::DeviceLayer::PlatformManagerImpl>::_RunEventLoop() ../../src/include/platform/internal/GenericPlatformManagerImpl_POSIX.ipp:181 (chip-tool+0x98a227)
#21 chip::DeviceLayer::PlatformManager::RunEventLoop() ../../src/include/platform/PlatformManager.h:362 (chip-tool+0x988f75)
#22 chip::DeviceLayer::Internal::GenericPlatformManagerImpl_POSIX<chip::DeviceLayer::PlatformManagerImpl>::EventLoopTaskMain(void*) ../../src/include/platform/internal/GenericPlatformManagerImpl_POSIX.ipp:205 (chip-tool+0x98a87c)
Location is global '(anonymous namespace)::gIsCommandRunning' of size 1 at 0x55f81c7745ff (chip-tool+0x000000c485ff)
Mutex M185 (0x55f81c776180) created at:
#0 pthread_mutex_lock ../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:4240 (libtsan.so.0+0x4f30a)
#1 chip::DeviceLayer::Internal::GenericPlatformManagerImpl_POSIX<chip::DeviceLayer::PlatformManagerImpl>::_LockChipStack() ../../src/include/platform/internal/GenericPlatformManagerImpl_POSIX.ipp:78 (chip-tool+0x989e90)
#2 chip::DeviceLayer::PlatformManager::LockChipStack() ../../src/include/platform/PlatformManager.h:410 (chip-tool+0x988fa5)
#3 chip::DeviceLayer::Internal::GenericPlatformManagerImpl_POSIX<chip::DeviceLayer::PlatformManagerImpl>::_RunEventLoop() ../../src/include/platform/internal/GenericPlatformManagerImpl_POSIX.ipp:170 (chip-tool+0x98a147)
#4 chip::DeviceLayer::PlatformManager::RunEventLoop() ../../src/include/platform/PlatformManager.h:362 (chip-tool+0x988f75)
#5 chip::DeviceLayer::Internal::GenericPlatformManagerImpl_POSIX<chip::DeviceLayer::PlatformManagerImpl>::EventLoopTaskMain(void*) ../../src/include/platform/internal/GenericPlatformManagerImpl_POSIX.ipp:205 (chip-tool+0x98a87c)
Thread T5 (tid=63013, running) created by main thread at:
#0 pthread_create ../../../../src/libsanitizer/tsan/tsan_interceptors_posix.cpp:969 (libtsan.so.0+0x5ad75)
#1 chip::DeviceLayer::Internal::GenericPlatformManagerImpl_POSIX<chip::DeviceLayer::PlatformManagerImpl>::_StartEventLoopTask() ../../src/include/platform/internal/GenericPlatformManagerImpl_POSIX.ipp:231 (chip-tool+0x98a40a)
#2 chip::DeviceLayer::PlatformManager::StartEventLoopTask() ../../src/include/platform/PlatformManager.h:375 (chip-tool+0xaacca2)
#3 chip::Controller::DeviceControllerFactory::ServiceEvents() ../../src/controller/CHIPDeviceControllerFactory.cpp:331 (chip-tool+0xab0417)
#4 CHIPCommand::StartWaiting(std::chrono::duration<unsigned int, std::ratio<1l, 1000l> >) ../../examples/chip-tool/commands/common/CHIPCommand.cpp:403 (chip-tool+0x83e353)
#5 CHIPCommand::Run() ../../examples/chip-tool/commands/common/CHIPCommand.cpp:187 (chip-tool+0x83c839)
#6 Commands::RunCommand(int, char**, bool) ../../examples/chip-tool/commands/common/Commands.cpp:147 (chip-tool+0x85d4f7)
#7 Commands::Run(int, char**) ../../examples/chip-tool/commands/common/Commands.cpp:51 (chip-tool+0x85c288)
#8 main <null> (chip-tool+0x569c0a)
SUMMARY: ThreadSanitizer: data race ../../examples/chip-tool/commands/interactive/InteractiveCommands.cpp:127 in InteractiveStartCommand::ParseCommand(char*)
==================
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
16 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Make BLE connection retry on getting the following error:
FAIL: ConnectDevice : GDBus.Error:org.bluez.Error.Failed: Software caused connection abort.Tested with nRF Connect platform, triggering above error, commissioning passed.