Home

Welcome to the edison_iot wiki!

Setup Steps:

1- Download Intel software: https://software.intel.com/en-us/iot/getting-started

2- Download Edison operating system: http://www.intel.com/support/edison/sb/CS-035286.htm#1

3- Setup Wifi Connection: http://www.intel.com/support/edison/sb/CS-035342.htm

4- Configure opkg:

a. opkg install git

b. Note: If you get the error Unknown package 'git', add this repo to the feeds (vi /etc/opkg/base-feeds.conf)

src all http://iotdk.intel.com/repos/1.1/iotdk/all

src x86 http://iotdk.intel.com/repos/1.1/iotdk/x86

src i586 http://iotdk.intel.com/repos/1.1/iotdk/i586

c. opkg update

5- opkg install libusb-1.0-dev

6- Install GreenBean package https://github.com/GEMakers/green-bean

7- Connect GreenBean to the development board. Move sw1 towards the USB port.

8- Run HidTest.js

9- If the GreenBean HID information is displayed, you are good to go!