Added list of git repositories for future cleanup (#176)

* Added list of git repositories for future cleanup

* Split the repository lists into multiple files and removed a couple of additional repos

Author: Hecatron

docs/infrastructure/github/further-investigation-todo.md

@@ -0,0 +1,47 @@
+# Further Investigation - Todo
+
+## Potential Removal
+
+  * https://github.com/HACManchester/inkcut_dmpl  
+    This appears to be a forked copy of https://github.com/shackspace/inkcut_dmpl  
+    But it doesn't have anything additional to the copy it's forked from, just a couple of commits behind
+
+  * https://github.com/HACManchester/Website  
+    I think this is code for an old version of the original website from around 11 years ago?
+
+  * https://github.com/HACManchester/1wire-2-mqtt  
+    Empty Repo
+
+  * https://github.com/HACManchester/hackmap  
+    Some sort of chart, not sure how to open it
+
+  * https://github.com/HACManchester/Pumpkin-Hacking  
+    Some details back when we had pumpkin hacking
+
+  * https://github.com/HACManchester/Tools.3DPrinter.Ender  
+    I think this is stuff for an older Ender printer we might not have around anymore
+    Check with Harvy on this one
+
+  * https://github.com/HACManchester/fortune  
+    Some sort of python related project for telling fortunes?
+
+  * https://github.com/HACManchester/MM2010  
+    Something called March Madness from 2010
+
+## Unknown
+
+  * https://github.com/HACManchester/SketchV2  
+    This might be the code for the giant electronic etch-a-sketch we used to have in the space.  
+    I remember it was something that used to be taken to different events  
+    But I think the hardware for it has gone now
+
+  * https://github.com/HACManchester/ProjectASketch  
+    Some sort of project similar to the etch a sketch but using a projector?
+
+  * https://github.com/HACManchester/mqtt-2-bot  
+    I think we used to have an IRC channel a long long time back  
+    This appears to be code for hooking up MQTT to that
+
+  * https://github.com/HACManchester/propaganda  
+    Appears to be an old chart for the cost of hackspace?
+

docs/infrastructure/github/github-repos.md

@@ -0,0 +1,48 @@
+# Github Repositories
+
+This is a list of the existing github repositories.
+
+## Documenation
+
+  * https://github.com/HACManchester/documentation  
+    Main Documentation repo
+
+  * https://github.com/HACManchester/.github  
+    Header for the github organisation
+
+  * https://github.com/HACManchester/digital-infra  
+    This repo is private, it's details for the new door system  
+    It's also for containing information about networking / firewalls / network diagrams etc  
+
+## Tools
+
+  * https://github.com/HACManchester/Tools.CNC.Metal.Dethklok  
+    Documentation and files related to the small 3020 CNC we have setup in electronics  
+    For milling PCBs
+
+  * https://github.com/HACManchester/Tools.OxCNC  
+    Documentation and files related to the large wood CNC
+
+  * https://github.com/HACManchester/Tools.Ender6.Klipper  
+    Documentation and files for the new Ender6 Printer being setup
+
+  * https://github.com/HACManchester/Tools.ProxxonCNC  
+    One of the devices we still have in electronics is a tniy Proxon CNC, (originally the first we had)
+    Needs a bit of setup to get it working properly but this is the docs related to that
+    We still have it so keep this one around
+
+## Projects
+
+  * https://github.com/HACManchester/CogClock  
+    This was originally a project of Bob's for a very large laser cut clock that mounts on the wall  
+    It's still around hanging on the wall of the Hackspace  
+    It's one issue is that the stepper motors are not strong enough to move the rings
+
+  * https://github.com/HACManchester/Foundary.ElectricCoil  
+    Details for a future project for building a Electric Coil Foundary for casting or hardening metal
+
+  * https://github.com/HACManchester/docker-dokuwiki
+    https://github.com/HACManchester/dokuwiki-demo-setup  
+    This was a dokuwiki demo setup I did that uses markdown instead of the dokuwiki syntax
+    If we could get a standard setup for the hacman authentication
+    then this could be a good replacment for the existing docs setup

docs/infrastructure/github/membership-todo.md

@@ -0,0 +1,61 @@
+# MemberShip / Door Access - Todo
+
+This is a list of repositories assocaited ether with the membership system or door access.
+Ideally we need to review the below to see what is needed
+
+## Membership system
+
+Not sure of the status of these
+some of this we might need but at the very least could do with being condensed down to less repos
+
+  * https://github.com/HACManchester/membership-system
+  * https://github.com/HACManchester/membership-deployment
+  * https://github.com/HACManchester/BBMembershipSystem
+  * https://github.com/HACManchester/membersystembeta
+  * https://github.com/HACManchester/MCP-LDAP  
+    I think this was an attempt at LDAP on an old version of the site
+  * https://github.com/HACManchester/hacman_down  
+    Some sort of placeholder if the main site is down?
+  * https://github.com/HACManchester/MCP
+  * https://github.com/HACManchester/nginx-proxy  
+    Used by Zerocool
+  * https://github.com/HACManchester/Hackspace-Ansible
+  * https://github.com/HACManchester/hackiosk
+  * https://github.com/HACManchester/redash-deployment
+  * https://github.com/HACManchester/docker-compose-lamp
+  * https://github.com/HACManchester/snackscreen
+
+### Email / Discourse Related
+
+  * https://github.com/HACManchester/Apps.Discourse  
+    This is some notes associated with the setup of the original mailing list.  
+    However ideally it needs updates from whoever is maintaining the mailing list at the moment.
+  * https://github.com/HACManchester/mta-sts.hacman.org.uk  
+    This repos is needed for the mta-sts feature of the mailing list, it needs to remain seperate
+  * https://github.com/HACManchester/Cloud-Forum2Telegram  
+    This posts notification to telegram on new mailing list post
+
+## Door System / Card Access
+
+These relate to the door access system, we have two different systems setup currently  
+The old system Ben setup which is acting as a backup, sensor mounted directly to the door (I think Alfie).  
+The new system mounted to the wall which can take pin numbers or rfid tags
+
+  * https://github.com/HACManchester/FRED
+  * https://github.com/HACManchester/door-alarm
+  * https://github.com/HACManchester/haccess-code
+  * https://github.com/HACManchester/ALF
+  * https://github.com/HACManchester/HacmanDoorSwitches  
+    Door Bell system I think
+  * https://github.com/HACManchester/mqtt2telegram  
+    Might be the scripts for the hacman bot channel on telegram
+  * https://github.com/HACManchester/mqtt-2-sound  
+    thing which makes a sound on door entry - linked to the newer door system I think
+  * https://github.com/HACManchester/beacon  
+    We used to have a large rotating beacon on top of the door I think to indicate the door bell had been pushed
+
+Ideally we could do with merging all this into two repos one for the old and one for the new door system
+
+
+
+

docs/infrastructure/github/migration-todo.md

@@ -0,0 +1,70 @@
+# Migration Todo
+
+This is a list of repostiroies where we can probably move the information
+into other repositories to reduce the numbers
+
+## Migration to Main Documentation
+
+  * https://github.com/HACManchester/Space  
+    I think this repo has a single poster and was acting as a issue tracker for Hackspace  
+    sort of like a communal to-do list  
+    TODO move poster to main documentation site
+
+  * https://github.com/HACManchester/Tools.Lathe.ML7  
+    Migrate this to the main documentation repo
+
+  * https://github.com/HACManchester/Snippets  
+    Snippets I think created for tools in the past  
+    TODO Migrate anything useful here into the main documentation site
+
+  * https://github.com/HACManchester/Tools.MetalCnc  
+    Originally Alex sourced some Electronics from Ebay (currently in a box under the Metal Milling Machine)  
+    This is the details on this
+
+  * https://github.com/HACManchester/MMMMM  
+    https://github.com/HACManchester/board_minutes  
+    Chris M is working on moving these into the main documentation
+
+  * https://github.com/HACManchester/constitution  
+    This might be out of date anyway, but just check before deleting if anything needs moving over
+
+  * https://github.com/HACManchester/Health-And-Safety-Signage  
+  * https://github.com/HACManchester/Branding  
+    Move to main documentation
+
+  * https://github.com/HACManchester/Health-And-Safety-Rules  
+    Check anything in here has been moved into the main documentation, then delete
+
+  * https://github.com/HACManchester/Infrastructure-Projects  
+    Plans for an EStop solution within the different workshop areas
+    Migrate to main documentation
+
+## Migration to Tools
+
+  * https://github.com/HACManchester/LaserCutter.PCB.Making  
+    https://hacmanchester.github.io/LaserCutter.PCB.Making  
+    https://github.com/HACManchester/Apps.Cad  
+    A Lot of info for this one, migrate it across to Tools.CNC.Metal.Dethklok for milling pcbs
+
+  * https://github.com/HACManchester/visicut-settings  
+    Since we haven't moved the orange laser to a new control board yet, maybe keep this for now
+    Move it to a Tools.OrangeLaser repo
+
+  * https://github.com/HACManchester/pcb-gcode-settings  
+    Move this to the 3020 CNC repo
+
+  * https://github.com/HACManchester/Tools.Shapeoko2  
+    TODO Move anything useful here into the Tools.OxCNC repo
+
+  * https://github.com/HACManchester/LaserCutter  
+    This has the designs for the wooden base for the laser cutter  
+    move this to the Tools.OrangeLaser repo
+
+  * https://github.com/HACManchester/cura-settings  
+    https://github.com/HACManchester/slic3r-profile  
+    https://github.com/HACManchester/slic3r-settings  
+    Move to a central repo with settings for all the different 3d printers - Tools.3DPrinters.Profiles  
+    Potentially profiles for different filaments
+
+  * https://github.com/HACManchester/sticker-printer  
+    Rename to Tools.StickerPrinter