Estus Flask lamp

Ambient light that resembles a flickering Estus Flask sitting on a stone base, with multiple modes of operation, namely regular Estus Flask and Ashen Estus Flask.

Preview

Getting

git clone --recursive https://github.com/GrimKriegor/EstusFlask.git
cd EstusFlask/

Printing

Flask

models/flask.blend

Material       | Clear PLA
Layer height   | 0.1 mm
Wall thickness | 0.8 mm
Temperature    | 195° C
Infill         | Concentric 5%
Supports       | None
Base adhesion  | Brim 8 mm

Base

models/base.fcstd

Material       | Gray PLA
Layer height   | 0.2 mm
Wall thickness | 1.2 mm
Temperature    | 200° C
Infill         | Grid 15%
Supports       | Touching buildplate
Base adhesion  | Skirt

Wiring

RGB LED connected to pins 9, 6 and 5 (respectively) on an USB powered AVR ATMega328p board through 220 ohm resistors.

Building and uploading the code

cd src/
make upload

Or if you are using a programmer

cd src/
make ispload

Attribuition

models/flask.blend is a fork of Estus Flask by 3D2N licensed under the Creative Commons - Attribution license.