GitHub - ColumbiaGadgetWorks/MiniLathe: LinuxCNC configuration for the Spectralight lathe

Branches Tags

Name		Name	Last commit message	Last commit date
Latest commit History 5 Commits
250-0090.pdf		250-0090.pdf
7i76E Lathe IO.png		7i76E Lathe IO.png
7i76eman.pdf		7i76eman.pdf
E2_datasheet.pdf		E2_datasheet.pdf
LatheMacro.svg		LatheMacro.svg
MiniLathe.hal		MiniLathe.hal
MiniLathe.ini		MiniLathe.ini
MiniLathe.pref		MiniLathe.pref
README		README
autosave.halscope		autosave.halscope
axis_manualtoolchange.hal		axis_manualtoolchange.hal
boring.ngc		boring.ngc
chamfer.ngc		chamfer.ngc
custom.hal		custom.hal
custom_gvcp.hal		custom_gvcp.hal
custom_postgui.hal		custom_postgui.hal
facing.ngc		facing.ngc
lathehandler.py		lathehandler.py
lathemacro.ui		lathemacro.ui
linuxcnc.var		linuxcnc.var
linuxcnc.var.bak		linuxcnc.var.bak
pins.jpg		pins.jpg
position.txt		position.txt
postgui_call_list.hal		postgui_call_list.hal
radius.ngc		radius.ngc
shutdown.hal		shutdown.hal
spectraLIGHT_Lathe_Manual.pdf		spectraLIGHT_Lathe_Manual.pdf
threading.ngc		threading.ngc
tool.tbl		tool.tbl
turning.ngc		turning.ngc

Repository files navigation

This config demonstrates the Lathe macros described here:
 http://www.linuxcnc.org/index.php/english/forum/41-guis/26550-lathe-macros
To add the macros to your own config you need to add this line to the INI file [DISPLAY] section:
[DISPLAY]
EMBED_TAB_NAME=Cycles
EMBED_TAB_COMMAND=halcmd loadusr -Wn gladevcp gladevcp -c gladevcp -u lathehandler.py -x {XID} lathemacro.ui

Then put these files in the same directory as the INI file. 
Bore.png
boring.ngc
chamfer.png
chamfer.ngc
facing.ngc
Facing.png
radius.ngc
radius.png
Threading.png
threading.ngc
turning.ngc
Turn.png
lathehandler.py
lathemacro.ui