v2.2.1

[2.2.1]

• Bug fixes:
  • Fixed a bug that prevent users to see advanced settings in their Omega I60.

v2.2.0

[2.2.0]

BCN3D Cloud:
BCN3D Stratos 2.2.0 is now ready to communicate with the new BCN3D Cloud 2.0
Log in with your account and enjoy printing your G-code files directly from the cloud to your printer!
Please remember that the new BCN3D Cloud 2.0 is now available at: https://www.cloudbcn3d.app/

v2.1.4

[2.1.4]

• Omega I60:

  • Updated printer definition, enabling even faster printing speeds!
  • Added Omega Hotend Tip 0.4 HF (Omega I60 series)
  • Added Omega Hotend Tip 0.6 HF (Omega I60 series)

• Added High Speed profiles for some BCN3D materials (Omega I60):

  • Omega Proto material
  • Omega Impact ABS
  • Omega Custom

• Added profile compatibility for some new OFN materials (Omega I60):

  • Polimaker PolySupport
  • Polimaker PolyCast
  • BASF Forward AM Ultrafuse PC ABS
  • Smart Materials ASA

• Adjusted printing profile for:

  • Omega Tooling CF Standard
  • Omega Resistant Nylon Fine
  • Omega Proto Standard
  • Omega Proto Fine

• Bug fixes:

  • Fixed a bug in Omega that caused incorrect extruder information when printing in dual dupli or mirror.

v2.2.0

[2.2.0]

• BCN3D Cloud:
  • BCN3D Stratos 2.2.0 is now ready to communicate with the new BCN3D Cloud 2.0
    Log in with your account and enjoy printing your G-code files directly from the cloud to your printer!
  • Please remember that the new BCN3D Cloud 2.0 is now available at: https://www.cloudbcn3d.app

v2.1.3

[2.1.3]

• Omega I60:

  • Added Omega Impact ABS material and print profile Standard.
  • Added Omega Custom. This material is based on the Omega Proto and will be used as a basis for creating new user materials for those who have an Omega Open Filament License (OOFL).

• Adjusted printing profile for:

  • Omega Tooling CF Standard
  • Omega Resistant Nylon Fine
  • Omega Proto Standard
  • Omega Proto Fine

• Bug fixes:

  • Fixed a bug that caused an error when trying to send G-codes to the cloud.
  • Fixed a bug in Omega that caused incorrect purging during dual printing.

v2.1.2

[2.1.2]

• Omega I60:

  • You can now add Omega to the BCN3D Cloud if the machine is registered, and you will then see it online in Stratos. However, please note that you cannot send files (.gcode) to your printer via Stratos yet. This feature will be available in the coming months.
  • Definition: Redefined Start and End Extruder commands.

• Added new certified print profiles for Omega Proto (Omega I60):

  • Hotend Tip 0.4 HR: A new print profile called Standard has been added. This profile is the first version of high-speed for Omega and works at a maximum of 150mm/s and 2000mm/s² acceleration. It reduces print time by around 50% compared to the Fine profile, while ensuring similar finish and strength.
  • Hotend Tip 0.6 HR: A new print profile called Standard has been added. It is the first one for the 0.6mm Hotend Tip for Omega Proto material and is ideal for printing large tooling quickly while ensuring good print surface quality and strength.

• Bug fixes:

  • Fixed a bug that caused an error when trying to print with Hotend RX.
  • Fixed a bug in Sigma printers that caused certain materials, such as ABS or PA, to not be detected.
  • Materials and extruders mismatch was not checked; this is now fixed.
  • Various internal bug fixes.

v2.1.1: Merge pull request #41 from BCN3D/2.1.1

[2.1.1]

• Change Omega I60 definition:

• All start and end orders will now be handled by the printer's firmware instead of Stratos. It is madatory to have the Omega updated to firmware 1.4.0.

• Bug fixes:

• Fixed an issue that prevented switching from custom to recommended printer profiles.
• New materials now appear only in printers that support them.
• Fixed a bug that caused an error when trying to print with Hotend X and Hotend M.
• Support blockers can now be used with all extruders.
• Various internal bug fixes.

v2.1.0

[2.1.0]

• BCN3D Stratos 2.1.0 is based on Ultimaker Cura 5.7 with all Stratos improvements

• Improved general performance since Cura 5.4

• Improved Omega I60 definition

• Adjusted printing profile for:

• Omega Tooling CF Standard
• Omega Resistant Nylon

• Bug fixes:

• Fixed a problem that made switching from custom to recommended when change printer profile
• Internal bug fixing

v2.0.1

[2.0.1]

• Printing profile adjustments
• Added links for OFN Materials

• Bug fixes:

• Fixed a problem while printing in dual mode
• Pause at layer now works properly
• Fixed some names and translations
• Internal bug fixing

• Added profile compatibility for some MatX materials (Epsilon Series):

• MatX AMBX PLA

• Added profile compatibility for some Smart Materials materials (Epsilon Series):

• Smart Materials ABS
• Smart Materials ASA

v2.0.0

[2.0.0]

• BCN3D Stratos 2.0.0 is based on Ultimaker Cura 5.4 with all Stratos improvements

• Improved general performance since Cura 4.8
• Internal bug fixing

• Added Omega I60

• Omega I60 new definition
• Prepare machine to support 1,75mm materials
• Added Omega Hotend Tip 0.4 HR (Omega I60 series)
• Omega Hotend Tip 0.6 HR (Omega I60 series)

• Added profile compatibility for some BCN3D materials (Omega I60):

• Omega Proto material
• Omega Resistant Nylon
• Omega Tooling CF

• Added Flexible Printing Surface interface (Espsilon series and Sigma D25)

• Added profile compatibility for some Smart Materials materials (Epsilon Series):

• Smart Materials PLA