Scannort

A network port scanner

  ██████  ▄████▄   ▄▄▄       ███▄    █  ███▄    █  ▒█████   ██▀███  ▄▄▄█████▓
▒██    ▒ ▒██▀ ▀█  ▒████▄     ██ ▀█   █  ██ ▀█   █ ▒██▒  ██▒▓██ ▒ ██▒▓  ██▒ ▓▒
░ ▓██▄   ▒▓█    ▄ ▒██  ▀█▄  ▓██  ▀█ ██▒▓██  ▀█ ██▒▒██░  ██▒▓██ ░▄█ ▒▒ ▓██░ ▒░
  ▒   ██▒▒▓▓▄ ▄██▒░██▄▄▄▄██ ▓██▒  ▐▌██▒▓██▒  ▐▌██▒▒██   ██░▒██▀▀█▄  ░ ▓██▓ ░ 
▒██████▒▒▒ ▓███▀ ░ ▓█   ▓██▒▒██░   ▓██░▒██░   ▓██░░ ████▓▒░░██▓ ▒██▒  ▒██▒ ░ 
▒ ▒▓▒ ▒ ░░ ░▒ ▒  ░ ▒▒   ▓▒█░░ ▒░   ▒ ▒ ░ ▒░   ▒ ▒ ░ ▒░▒░▒░ ░ ▒▓ ░▒▓░  ▒ ░░   
░ ░▒  ░ ░  ░  ▒     ▒   ▒▒ ░░ ░░   ░ ▒░░ ░░   ░ ▒░  ░ ▒ ▒░   ░▒ ░ ▒░    ░    
░  ░  ░  ░          ░   ▒      ░   ░ ░    ░   ░ ░ ░ ░ ░ ▒    ░░   ░   ░      
      ░  ░ ░            ░  ░         ░          ░     ░ ░     ░              
         ░                                                                   

Introduction

Scannort is an interactive Pyhton script that allow you To:

• Scan hosts for open ports fast using threads
• Suggest an nmap scan based on the results
• Customise your nmap arguments if needed
• Run the scan and store the results

Requirements

Almost no requirements except Python3 must be installed on your system, the requirements.txt file says everything :)

Install Options

install it via pip/pip3:

$ pip install git+https://github.com/0x00650a/Scannort.git

Clone it

$ git clone https://github.com/0x00650a/Scannort.git
$ cd Scannort
$ pip install .

Script Only

$ git clone https://github.com/0x00650a/Scannort.git 
$ cd Scannort
$ [sudo] cp $(pwd)/src/Scannort.py /usr/local/bin/Scannort.py

Uninstall

Uninstall it with pip

$ pip uninstall Scannort

How to use it

Just type the command:

$ Scannort

And follow the prompts to enter the target IP address/url, and explore the suggested Nmap scans based on the initial port scan results.

Issues

If you encounter any problems, please report them on our GitHub Issues page.

Contributions

Your contribution and feedback are highly appreciated! :)