diff --git a/Segment/API/Get-ZNInboundRulesMembersOf.ps1 b/Segment/API/Get-ZNInboundRulesMembersOf.ps1
new file mode 100644
index 0000000..5b2772e
--- /dev/null
+++ b/Segment/API/Get-ZNInboundRulesMembersOf.ps1
@@ -0,0 +1,270 @@
+#=============================================================================
+# Export Inbound Rules for Members of a Zero Networks Group
+#=============================================================================
+#
+# VERSION:
+# 1.0.0 - Initial release
+# - Basic functionality for exporting inbound rules for group members
+# - CSV export with detailed rule information
+# - Console output with formatted table view
+#
+# AUTHOR:
+# Antonio Vasconcelos (@anthonws - https://github.com/anthonws)
+#
+# LEGAL DISCLAIMER:
+# This script is provided "AS IS" without warranty of any kind, either express
+# or implied, including but not limited to the implied warranties of merchantability
+# and fitness for a particular purpose. The entire risk arising out of the use or
+# performance of this script remains with you. In no event shall the authors or
+# copyright holders be liable for any damages whatsoever (including, without
+# limitation, damages for loss of business profits, business interruption, loss
+# of business information, or other pecuniary loss) arising out of the use of or
+# inability to use this script.
+#
+# OVERVIEW:
+# This PowerShell script exports inbound rules for all assets that are members
+# of a specified Zero Networks group. It provides a comprehensive view of the
+# inbound access rules that apply to group members, including source, destination,
+# protocols, ports, and rule states.
+#
+# SYNOPSIS:
+# .\Export_Inbound_Rules_Members_of_Group.ps1 [-TargetGroupId <string>]
+#
+# DESCRIPTION:
+# The script performs the following operations:
+# 1. Connects to Zero Networks using API credentials
+# 2. Retrieves all groups and assets from the Zero Networks environment
+# 3. Identifies assets that are members of the specified group
+# 4. Collects all inbound rules for those assets
+# 5. Exports the results to a CSV file and displays them in a formatted table
+#
+# OUTPUT:
+# - CSV file: Contains detailed information about all inbound rules
+#   - Asset name
+#   - Source and destination entities
+#   - Destination process
+#   - Protocol and port information
+#   - Rule type (Allow/Block/Monitor)
+#   - Rule state (Active/Inactive)
+#   - Rule description
+#
+# - Console output: Displays a formatted table of the rules
+#
+# PARAMETERS:
+# -TargetGroupId: The ID of the Zero Networks group to analyze
+#                Format examples:
+#                - g:c:cccccccc (Custom group)
+#                - g:s:ssssssss (System group)
+#                - g:a:aaaaaaaa (Active Directory group)
+#                - g:t:tttttttt (Tags group)
+#                - g:o:oooooooo (OT/IoT group)
+#                - g:u:uuuuuuuu (Organizational Unit group)
+#
+# REQUIREMENTS:
+# - PowerShell 5.1 or higher
+# - Zero Networks PowerShell module
+# - Valid Zero Networks API key
+#
+#=============================================================================
+
+param(
+    [string]$TargetGroupId
+)
+
+# If no TargetGroupId is provided, prompt for it
+if (-not $TargetGroupId) {
+    Write-Host "`nZero Networks Group ID Examples:"
+    Write-Host "- g:c:cccccccc (Custom group)"
+    Write-Host "- g:s:ssssssss (System group)"
+    Write-Host "- g:a:aaaaaaaa (Active Directory group)"
+    Write-Host "- g:t:tttttttt (Tags group)"
+    Write-Host "- g:o:oooooooo (OT/IoT group)"
+    Write-Host "- g:u:uuuuuuuu (Organizational Unit group)"
+    $TargetGroupId = Read-Host "`nEnter the Zero Networks Group ID"
+}
+
+Write-Host "`nInitializing Zero Networks connection..."
+Set-ZNApiKey -ApiKey ''
+
+$protocolMap = @{
+    1 = "ICMP"
+    2 = "IGMP"
+    6 = "TCP"
+    17 = "UDP"
+    47 = "GRE"
+    50 = "ESP"
+    51 = "AH"
+    132 = "SCTP"
+    255 = "Other"
+    256 = "Any"
+}
+
+$actionMap = @{
+    1 = "Allow"
+    2 = "Block"
+    3 = "Monitor"
+}
+
+Write-Host "Fetching groups..."
+# Get all groups
+$offset = 0
+$limit = 400
+$allGroups = @()
+
+do {
+    $groupResponse = Get-ZnGroup -Limit $limit -Offset $offset
+    if ($groupResponse) {
+        $allGroups += $groupResponse.Items
+    }
+    $offset += $limit
+} while ($groupResponse.Items.Count -eq $limit)
+
+# Find target group
+$targetGroup = $allGroups | Where-Object { $_.id -eq $TargetGroupId }
+if (-not $targetGroup) {
+    Write-Warning "Could not find target group with ID: $TargetGroupId"
+    exit
+}
+
+Write-Host "Fetching assets..."
+# Get all assets
+$assets = @()
+$offset = 0
+$limit = 400
+
+do {
+    $assetResponse = Get-ZnAsset -Limit $limit -Offset $offset
+    if ($assetResponse) {
+        $assets += $assetResponse.Items
+    }
+    $offset += $limit
+} while ($assetResponse.Items.Count -eq $limit)
+
+Write-Host "Finding group members..."
+# Filter assets in target group
+$matchingAssets = @()
+foreach ($asset in $assets) {
+    if (-not $asset.id) { continue }
+    
+    $memberResponse = Get-ZNAssetMemberOf -AssetId $asset.id
+    $memberOf = if ($memberResponse.PSObject.Properties.Name -contains 'Items') {
+        $memberResponse.Items
+    } else {
+        $memberResponse
+    }
+    
+    if ($memberOf | Where-Object { $_.id -eq $TargetGroupId }) {
+        $matchingAssets += @{
+            Name = $asset.name
+            Id = $asset.id
+        }
+    }
+}
+
+Write-Host "Found $($matchingAssets.Count) assets in group. Fetching inbound rules..."
+
+# Get inbound rules for matching assets
+$results = @()
+foreach ($asset in $matchingAssets) {
+    Write-Host "Processing rules for $($asset.Name)..."
+    $offset = 0
+    $inboundRules = @()
+    
+    do {
+        $ruleResponse = Get-ZnAssetInboundRule -AssetId $asset.Id -Limit $limit -Offset $offset
+        if ($ruleResponse) {
+            $inboundRules += $ruleResponse.Items
+        }
+        $offset += $limit
+    } while ($ruleResponse.Items.Count -eq $limit)
+
+    foreach ($rule in $inboundRules) {
+        # Get source and destination based on rule direction
+        $source = if ($rule.Direction -eq 1) {  # Inbound
+            if ($rule.RemoteEntityInfos.Count -gt 0) {
+                $rule.RemoteEntityInfos[0].Name
+            } else { "Any" }
+        } else {  # Outbound
+            if ($rule.LocalEntityInfos.Count -gt 0) {
+                $rule.LocalEntityInfos[0].Name
+            } else { "Any" }
+        }
+        
+        $destination = if ($rule.Direction -eq 1) {  # Inbound
+            if ($rule.LocalEntityInfos.Count -gt 0) {
+                $rule.LocalEntityInfos[0].Name
+            } else { "Any" }
+        } else {  # Outbound
+            if ($rule.RemoteEntityInfos.Count -gt 0) {
+                $rule.RemoteEntityInfos[0].Name
+            } else { "Any" }
+        }
+
+        # Get destination process
+        $destinationProcess = if ($rule.LocalProcessesList -and $rule.LocalProcessesList -ne "*") {
+            $rule.LocalProcessesList
+        } else { 
+            "Any" 
+        }
+
+        # Get protocol and port
+        $protocols = @()
+        $ports = @()
+        
+        if ($rule.PortsList.Count -gt 0) {
+            foreach ($portInfo in $rule.PortsList) {
+                if ($portInfo.ProtocolType -ne $null) {
+                    $protocolName = if ($protocolMap.ContainsKey($portInfo.ProtocolType)) {
+                        $protocolMap[$portInfo.ProtocolType]
+                    } else {
+                        "Unknown ($($portInfo.ProtocolType))"
+                    }
+                    $protocols += $protocolName
+                }
+                if ($portInfo.Ports) {
+                    $ports += $portInfo.Ports
+                }
+            }
+        }
+
+        $protocol = if ($protocols.Count -gt 0) {
+            ($protocols | Select-Object -Unique) -join ", "
+        } else { "Any" }
+
+        $port = if ($ports.Count -gt 0) {
+            ($ports | Select-Object -Unique) -join ", "
+        } else { "Any" }
+
+        $results += [PSCustomObject]@{
+            Asset = $asset.Name
+            Source = $source
+            Destination = $destination
+            DestinationProcess = $destinationProcess
+            Protocol = $protocol
+            Port = $port
+            RuleType = $actionMap[$rule.Action]
+            State = if ($rule.State -eq 1) { "Active" } else { "Inactive" }
+            Description = if ($rule.Description) { $rule.Description } else { "" }
+        }
+    }
+}
+
+# Export to CSV
+$safeGroupId = $TargetGroupId -replace ':', '_'
+$csvPath = Join-Path $PSScriptRoot "InboundRules_For_Group_$safeGroupId.csv"
+$results | Export-Csv -Path $csvPath -NoTypeInformation
+
+# Display results in table format
+Write-Host "`nInbound Rules for Members of Group: $($targetGroup.name)"
+Write-Host "----------------------------------------"
+$results | Format-Table -Property @(
+    @{Label="Source"; Expression={$_.Source}; Width=20},
+    @{Label="Destination"; Expression={$_.Destination}; Width=20},
+    @{Label="Destination Process"; Expression={$_.DestinationProcess}; Width=30},
+    @{Label="Protocol"; Expression={$_.Protocol}; Width=10},
+    @{Label="Port"; Expression={$_.Port}; Width=10},
+    @{Label="Rule Type"; Expression={$_.RuleType}; Width=10},
+    @{Label="State"; Expression={$_.State}; Width=10}
+) -AutoSize
+
+Write-Host "`nResults exported to: $csvPath"