No Map Data

[ammikey]

Radio master TX16s running Edge TX 2.8, latest Gmapcatcher, Horus mapping widget 2.0.0b2, Inav 5.1.0.
Yaapu widget and all telemetry working correctly the maps are at 100x100 and on the sd card at ( Images/ Yaapu/Maps/Sat_tiles.
Down load zooms are 2 to 6 and levels are set accordingly in the LUA. I've tried everything I could find online to resolve the problem with no luck. Any help will be greatly appreciated.
Thanks
Mike Johnson

[lbellic]

i have the same problem , same radio

[yaapu]

Hi this is most likely a setup issue.
To double check the obvious:

• make sure you discovered your GPS sensor
• remove zoom level restrictions from the lua sensor config (you can add them later on)
• make sure the widget is setup to use gmapcacther, set min zoom = -2, max zoom=17, default zoom = -2
• setup the zoom control switch as per wiki instruction, set a high delay like 2 or 3 secs

[lbellic]

Hi this is most likely a setup issue. To double check the obvious:

• make sure you discovered your GPS sensor
• remove zoom level restrictions from the lua sensor config (you can add them later on)
• make sure the widget is setup to use gmapcacther, set min zoom = -2, max zoom=17, default zoom = -2
• setup the zoom control switch as per wiki instruction, set a high delay like 2 or 3 secs

i tried this setup , but i can't view the map... in the past i tried the first version of the script and working fine wit 100x100 tiles gmapcatcher, i don't know why this one can't load the maps..

[lbellic]

i solved the problem by resize every image with mktiles

[yaapu]

i solved the problem by resize every image with mktiles

no need to use mktiles! please read the wiki, the gmapcacthr version I provide does resize the tiles down to 100x100

[lbellic]

ah ok , i figure out that the problem was the path in the /IMAGE folder and not the old path..
not about the size of tile.. Thx script running well , only thing it's buggy is the travel distance

[yaapu]

ah ok , i figure out that the problem was the path in the /IMAGE folder and not the old path.. not about the size of tile.. Thx script running well , only thing it's buggy is the travel distance
what do you man buggy?

[lbellic]

i mean there's bug in the value "distance traveled"

[yaapu]

ok, but what's the bug? is lower/higher than expected, it's blank, ?? provide a screenshot please

[ammikey]

Hi, I found the problem is in the file structure on the SD card. The file structure that works is as follows.

[yaapu]

@ammikey
Hi that is not a bug, it depends on the type of tiles you download:
satellite type images path is /sat_tiles, and in the widget you need to select "satellite"
vector type images path is /tiles and in the widget you need to select "map"

so the bug might be in the docs if this is not clear :-)

[lwan288]

Hi this is most likely a setup issue. To double check the obvious:

• make sure you discovered your GPS sensor
• remove zoom level restrictions from the lua sensor config (you can add them later on)
• make sure the widget is setup to use gmapcacther, set min zoom = -2, max zoom=17, default zoom = -2
• setup the zoom control switch as per wiki instruction, set a high delay like 2 or 3 secs

The zoom -2 and -1 is working, but it is weird that zoom 0 doesn't show any map data while zoom 0 map was actually downloaded and copied to the folder. After changed to different zoom level range, sometimes the map is partially shown on the screen as below (This is a simulation). The yourmodelname_sensors_maps.lua file is empty on my TX16s (EdgeTX 2.9) and I didn't edit anything there yet. Any suggestions?

update: It is working now! Just because I didn't download enough maps. Thanks!