ShapeFFT and ShapeGerstner produce lines in foam simulation data

[magenta404]

Describe the bug
Reported by @klauskobald on Discord. When using the ShapeFFT, foam simulation data appears to have grid lines.

Screenshots / video

Versions
Latest

To Reproduce

1. In the main scene, swap ShapeGerstnerBatched for ShapeFFT.
2. Reduce foam fade rate to something like 0.2 to make it more prominent.

Platform

• Editor and Standalone
• MacOS and Windows

Additional context
I tried disabling the variance to see if it was that but had no effect from what I could see.

[huwb]

Thanks for posting. I don't immediately know what works cause this but will post if I figure it out

[gamemachine]

This is not specific to fft, it happens with shape gerstner also.

[magenta404]

It also affects ShapeGerstnerBatched, but it is not noticeable with a full spectrum.

@huwb I think ShapeGerstner and ShapeFFT are more susceptible because they are tiled? Rendering the Jacobian directly into the foam data shows the issue still. The foam data from the ShapeGerstnerBatched appears more stable. An option could be to add noise or blur the foam data.

[huwb]

Would it be possible to see it happening for SGB? With a simplified spectrum would be useful.

I messed around here but did not notice an issue using SGB.

Yeah the tiling could be exacerbating it for SG/SFFT. But its not clear to me why. If the waves were not tiling properly that would do it. Perhaps some very large wavelengths are not tiling or something. Although I jut spent some time messing around with SFFT. There are obvious repeating patterns in the foam data, but im not getting "gridlines" like the above screenshot. I tried the repro steps above. Would itbe worth pushing a temp branch that we can use as a repro, so i can make sure i get the issue here?

[magenta404]

Sure. Test branch here: https://github.com/wave-harmonic/crest/tree/test/foam-grid-issue

Test scenes are under Test folder. There is one scene per shape type.

[huwb]

Thanks. Weirdly i suddenly seem to repro it easily by just dropping in an FFT component.

It looks indeed like the wave patches are not tiling. I see lines every 0.5m which is exactly the size of the first wave cascade. If i turn off ~0.5m waves in the spectrum sliders, they go away.

I don't know why the waves are not tiling properly, the FFT was not messed with too much. so it is supposed to be strictly repeating patches (FFT is not able to do non-repeating). Might be worth comparing the spectrum with other similar code, or hacking the spectrum to only have one non-zero value to produce a single wave and try to show that it clearly does not tile.

Will post again if i make progress.

[magenta404]

Fixed with 4.14.

[klauskobald]

Has this really been fixed?
I still get lines after updating from 4.13 - 4.15.
Do I need to replace components?