Hame-Relay , about configuration for HMJ-2 firmware 116

[ghino18]

Excuse me, i have a HMJ-2 firmware 116, for me does not work but do not understand the reason.

my hamerelay configuration file is, actually

inverse_forwarding: false
default_broker_id: hame-2025
log_level: info
devices:

• device_id: 3.......
  mac: 1.......
  type: HMJ-2
  version: 116
  mqtt_uri: mqtt://192.168.1.10:1885
  username: ......@gmail.com
  password: ........

log seems to be ok, but i see update values on app only on little screen ( percentage, on line green ) that you have to tap to enter on full battery detail, but when i tap nothing is updated now

[18:40:48] INFO: Type: HMJ-2
[18:40:48] INFO: Version: 116
[18:40:48] INFO: Broker: hame-2025
[18:40:48] INFO: Inverse Forwarding: false
[18:40:48] INFO: Use Remote Topic ID: false
[18:40:48] INFO: ------------------
[18:40:48] INFO:
[18:40:49] INFO: Health server listening on port 8080
[18:40:49] INFO: [hame-2025] Connected to config broker
[18:40:49] INFO: [hame-2025] Subscribed to local broker topics
[18:40:49] INFO: [hame-2025] Connected to remote broker
[18:40:49] INFO: [hame-2025] Subscribed to remote broker topi
i do not uderstand, could you help me

[tomquist]

log seems to be ok, but i see update values on app only on little screen ( percentage, on line green ) that you have to tap to enter on full battery detail, but when i tap nothing is updated now

Sorry, I read this sentence three times but I have no clue what you're saying. Please also mention which Hame Relay mode you're using, whether you have configured your storage to use the local mqtt broker. Also please mention what is the expected and the actual behavior?

[ghino18]

Hi, sorry if I can't explain myself well in English.

The problem is that from the log it seems to work fine, but if I open the Android app remotely, only some of the functions are active.

I activated MQTT with Mode 1 following the guide.

I use Mosquitto Broker on a Debian PC on port 1185 and set its IP in the configuration.

The hamerelay configuration is for the add-on in Home Assistant (installed virtualized), but I'd like to move it to the Debian PC with Docker so it runs faster.

Now I only use the add-on so I can see the log more easily.

Hm2mqtt seems to work fine with docker on debian PC where mosquito Is.

From Home Assistant, I can see all the B2500 functions (although, I don't know if this is normal, the response and data update times are 7-10 seconds or more and for activate passtrought i something have to repeat the click on button two o three times).

The problems I'm having are:

For Hamerelay, the app only works partially. I'm attaching screenshots.

Some data is up to date, but for example, the Wi-Fi appears offline even though the B2500 is connected. Last update data was the last when i use bluetooth but battery percentage Is in RealTime.

The other problem, but I think it depends on the B2500 rather than HM2MQTT, is that the passthrough starts working when the battery is charged, but after a certain amount of time it stops and doesn't restart even if the battery is charged. Without setting the automatic sunset setting, the battery starts to drain.