RTKCONV - satellite number error - in rtkconv.trace

[StefanCiesilski]

Hello,
i use RTKCONV 2.4.3 b34 to convert the raw observation file from a dji phantom 4 rtk.
The file is in rtcm3. Debug level 2

In the rtkconv.trace is this error:

2 rtcm3 1045 satellite number error: prn=40

I add the file.
Is it a real error?

Thanks for looking

rtkconv_trace.zip

PPKRAW_rtcm3.zip

[yydgis]

ESA launched new GALILEO satellites at the end of 2021, you need to increase the MAXPRNGAL in the rtklib.h to accommodate new launches. BTW, when is the data? your trace file shown 2022/3/7, but the convbin from rtklib shows 2022/3/10. #ifdef ENAGAL #define MINPRNGAL 1 /* min satellite PRN number of Galileo */ #define MAXPRNGAL 36 /* max satellite PRN number of Galileo */ #define NSATGAL (MAXPRNGAL-MINPRNGAL+1) /* number of Galileo satellites */ #define NSYSGAL 1 #else #define MINPRNGAL 0 #define MAXPRNGAL 0 #define NSATGAL 0 #define NSYSGAL 0 #endif

…

On Wed, Apr 6, 2022 at 11:54 PM StefanCiesilski ***@***.***> wrote: Hello, i use RTKCONV 2.4.3 b34 to convert the raw observation file from a dji phantom 4 rtk. The file is in rtcm3. In the rtkconv.trace is this error: 2 rtcm3 1045 satellite number error: prn=40 I add the file. Is it a real error? Thanks for looking rtkconv_trace.zip <https://github.com/tomojitakasu/RTKLIB_bin/files/8440321/rtkconv_trace.zip> PPKRAW_rtcm3.zip <https://github.com/tomojitakasu/RTKLIB_bin/files/8440335/PPKRAW_rtcm3.zip> — Reply to this email directly, view it on GitHub <#25>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AD6QBIYUTNYSL5BH7Y4MZX3VD2BBHANCNFSM5SYKJL3A> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[StefanCiesilski]

Hello,
ah ok. I read that about the new GALILEO satellites.
The data is from 2022/03/24. When I start the conversion with rtkconv.exe it asks me for the start time an i enter 2022/3/7.
I use this rtkconv.exe from here and not other fork or what you mean?

I found the rtklib.h only in the https://github.com/tomojitakasu/RTKLIB/tree/rtklib_2.4.3/src repository and not hier by the _bin
How can i use it?

[easynavtech]

go to my fork branch https://github.com/easynavtech/rtklib.git => rtklib_2.4.3, choose the convbin.exe from bin directory, I fixed it for you. use the following command for your dataset => convbin.exe -r rtcm3 -tr 2022/3/24 0:0:0 -v 3.04 -os -od -y G,R,E,C,J,S -trace 2 PPKRAW.rtcm3

[StefanCiesilski]

@easynavtech
Thanks for help.
I have use the file and download the all, but a error ucrtbased.dll .

[yydgis]

change the binary to run without the DLL, you can check again, it should work

[StefanCiesilski]

Sorry, can't test it. the virus scanner reports a virus.
Can you convert it and put the files here?
Thanks

[easynavtech]

PPKRAW.zip

[StefanCiesilski]

Thanks very much.
I found the satellite E37 in the *.nav file.
That there are no entries in the *.obs file is correct, because no data is sent yet?

Do you know what the other messages in the convin.trace mean?

2 scan_file: sys=0 code=1C type=15
2 scan_file: sys=0 code=2W type=15
2 scan_file: sys=1 code=1C type=15

Thanks