GTK: Not Opening

[Maggin16]

It's giving an error like this '' Hmmm... it seems that you don't have gtk support or Yersinia has been configured with --disable-gtk option... Go and get it!!
What should I do

[eser1984]

+1

[Dcyyr]

same

[alecclyde]

Current workaround (still get some errors, but the Yersinia runs):

git clone https://github.com/tomac/yersinia /opt/yersinia
apt install autoconf libgtk-3-dev libnet1-dev libgtk2.0-dev
cd /opt/yersinia
./autogen.sh
./configure
make
make install

then it should run. Look for errors throughout each configure or autogen command run for packages it tells you are missing.

[0skull]

@alecclyde you forget libpcap-dev in this line

apt install autoconf libgtk-3-dev libnet1-dev libgtk2.0-dev libpcap-dev

[ThatIdiotSid]

Just as a heads up, the listed workaround does result in xz-utils 5.6.1 and liblzma 5.6.1 being auto-installed as dependencies in Kali as of 4/3/2024.

[luoluo13]

same

[luoluo13]

Current workaround (still get some errors, but the Yersinia runs):

git clone https://github.com/tomac/yersinia /opt/yersinia
apt install autoconf libgtk-3-dev libnet1-dev libgtk2.0-dev
cd /opt/yersinia
./autogen.sh
./configure
make
make install

then it should run. Look for errors throughout each configure or autogen command run for packages it tells you are missing.

but it still error like the header said..... :(

[NILS-IT-OT-SEC]

you forgot to add --with-gtk...

git clone https://github.com/tomac/yersinia /opt/yersinia
apt install autoconf libgtk-3-dev libnet1-dev libgtk2.0-dev libpcap-dev -y
cd /opt/yersinia
./autogen.sh
./configure --with-gtk
make
make install

Current workaround (still get some errors, but the Yersinia runs):

git clone https://github.com/tomac/yersinia /opt/yersinia
apt install autoconf libgtk-3-dev libnet1-dev libgtk2.0-dev
cd /opt/yersinia
./autogen.sh
./configure
make
make install

then it should run. Look for errors throughout each configure or autogen command run for packages it tells you are missing.

but it still error like the header said..... :(

[POOPMONSTERxx696969xx]

Current workaround (still get some errors, but the Yersinia runs):
git clone https://github.com/tomac/yersinia /opt/yersinia
apt install autoconf libgtk-3-dev libnet1-dev libgtk2.0-dev
cd /opt/yersinia
./autogen.sh
./configure
make
make install

then it should run. Look for errors throughout each configure or autogen command run for packages it tells you are missing.

but it still error like the header said..... :(

i did this and i got the exact same error

[darth-Vader1729]

THIS SOLVED MY GTK ISSUES WITH YERSINIA :-
Kali GNU/Linux Rolling
Release: 2025.2

1. Remove any existing install:

sudo apt purge --auto-remove yersinia

2. Install build deps and grab the source:

sudo apt update
sudo apt install -y build-essential autoconf libgtk2.0-dev \
     libnet1-dev libpcap-dev libncurses5-dev git
sudo git clone https://github.com/tomac/yersinia /opt/yersinia
cd /opt/yersinia

3. Patch admin.c (in src/) to fix 64‑bit socket/GTK errors:

3.1. Edit admin.c in src/

cd /opt/yersinia/src
nano admin.c

3.2. In the peer function, insert a cast and use that new sockfd everywhere:
Find this line near the top of the file:

void *
admin_th_network_peer(void *sock)
{

– Change it to:

void *
admin_th_network_peer(void *sock_arg)
{
    /* pull the socket descriptor back out of the void* */
    int sock = (int)(intptr_t)sock_arg;

3.3. Then, below that you’ll see a call like:

fail = term_add_node(&term_node, TERM_VTY, sock, pthread_self());

– Make it:

pthread_t me = pthread_self();
fail = term_add_node(&term_node, TERM_VTY, sock, me);

(where me is pthread_t me = pthread_self(); that you should move up to just after your cast).

4. Build and install with GTK & ncurses in the /opt/yersinia:

cd..
./autogen.sh
./configure --with-gtk --with-ncurses --prefix=/usr/local
make -j$(nproc)
sudo make install

5. Launch the GUI:

yersinia -G

[darth-Vader1729]

Current workaround (still get some errors, but the Yersinia runs):
git clone https://github.com/tomac/yersinia /opt/yersinia
apt install autoconf libgtk-3-dev libnet1-dev libgtk2.0-dev
cd /opt/yersinia
./autogen.sh
./configure
make
make install
then it should run. Look for errors throughout each configure or autogen command run for packages it tells you are missing.

but it still error like the header said..... :(

i did this and i got the exact same error

#89 (comment)

[warpsel666]

THIS SOLVED MY GTK ISSUES WITH YERSINIA :- Kali GNU/Linux Rolling Release: 2025.2

1. Remove any existing install:

sudo apt purge --auto-remove yersinia

2. Install build deps and grab the source:

sudo apt update
sudo apt install -y build-essential autoconf libgtk2.0-dev \
     libnet1-dev libpcap-dev libncurses5-dev git
sudo git clone https://github.com/tomac/yersinia /opt/yersinia
cd /opt/yersinia

3. Patch admin.c (in src/) to fix 64‑bit socket/GTK errors:

3.1. Edit admin.c in src/

cd /opt/yersinia/src
nano admin.c

3.2. In the peer function, insert a cast and use that new sockfd everywhere: Find this line near the top of the file:

void *
admin_th_network_peer(void *sock)
{

– Change it to:

void *
admin_th_network_peer(void *sock_arg)
{
    /* pull the socket descriptor back out of the void* */
    int sock = (int)(intptr_t)sock_arg;

3.3. Then, below that you’ll see a call like:

fail = term_add_node(&term_node, TERM_VTY, sock, pthread_self());

– Make it:

pthread_t me = pthread_self();
fail = term_add_node(&term_node, TERM_VTY, sock, me);

(where me is pthread_t me = pthread_self(); that you should move up to just after your cast).

4. Build and install with GTK & ncurses in the /opt/yersinia:

cd..
./autogen.sh
./configure --with-gtk --with-ncurses --prefix=/usr/local
make -j$(nproc)
sudo make install

5. Launch the GUI:

yersinia -G

THIS SOLVED MY GTK ISSUES WITH YERSINIA :- Kali GNU/Linux Rolling Release: 2025.2

1. Remove any existing install:

sudo apt purge --auto-remove yersinia

2. Install build deps and grab the source:

sudo apt update
sudo apt install -y build-essential autoconf libgtk2.0-dev \
     libnet1-dev libpcap-dev libncurses5-dev git
sudo git clone https://github.com/tomac/yersinia /opt/yersinia
cd /opt/yersinia

3. Patch admin.c (in src/) to fix 64‑bit socket/GTK errors:

3.1. Edit admin.c in src/

cd /opt/yersinia/src
nano admin.c

3.2. In the peer function, insert a cast and use that new sockfd everywhere: Find this line near the top of the file:

void *
admin_th_network_peer(void *sock)
{

– Change it to:

void *
admin_th_network_peer(void *sock_arg)
{
    /* pull the socket descriptor back out of the void* */
    int sock = (int)(intptr_t)sock_arg;

3.3. Then, below that you’ll see a call like:

fail = term_add_node(&term_node, TERM_VTY, sock, pthread_self());

– Make it:

pthread_t me = pthread_self();
fail = term_add_node(&term_node, TERM_VTY, sock, me);

(where me is pthread_t me = pthread_self(); that you should move up to just after your cast).

4. Build and install with GTK & ncurses in the /opt/yersinia:

cd..
./autogen.sh
./configure --with-gtk --with-ncurses --prefix=/usr/local
make -j$(nproc)
sudo make install

5. Launch the GUI:

yersinia -G

Ur a fucking genius thanks

[Abdalkadercyber]

can someone show me a screenshot for successful install? how the "make" is successful

[kdc62582-afk]

can someone show me a screenshot for successful install? how the "make" is successful

like this，I following instruction above，great thanks@darth-Vader1729