AT90CAN128 testing, substitute CAN library

[zerodamage]

I have done some limited testing with this library on AT90CAN128 w. NMEA2000_avr library, however I did not succeed in getting it to run (seems to stop the program at NMEA2000.Open)

As an alternative, I have gotten it to run by substituting in AST_AVR from https://github.com/Atlantis-Specialist-Technologies/AST_CAN_Arduino_Library.

Hope this info is helpful for future development :)

[thomasonw]

Hey, thanks for the feedback – I do not have an AT90CANxxx CPU to do testing with, and one thought it would work. If you dig into things some and figure out why it is not, please push the changes up! Outside that am glad you found a solution which seems to work using the other driver. Thank,

[Jarimu]

I seem to be having the same issue, by default NMEA2000.Open appears to be causing my board to reset.

I have all the AST_CAN Library installed, but struggling to work out how to get it working with the NMEA0183toN2K.ino example from ttlappalainen