R4 and D3 swapped in B.Walach Hall-of-Fame build ?!

[rwdavis3rd]

Bug Report

Expected Behavior

R4 and D3 parts appear to be swapped from their silk-screen-labeled positions in exemplary build. Is this a intentional? I saw in some version history that this diode's location was tweaked circa V0.2 (correct?)

Observed Behavior

R4 and D3 parts appear to be swapped from their silk-screen-labeled positions in B.Walach Hall-of-Fame build, per illustration at
https://github.com/technobly/VEXTREME/blob/master/hall-of-fame/03%20-%20Brett%20Walach%20-%20v0.2/v0.2%20-%20top.jpg

Steps to Reproduce

Note that the diode is illustrated in position R4 (per silk-screen) and the resistor populates position D3. Other V0.2 builds (e.g. Malban) illustrate the parts populated as expected. Since my (recent) build is not working, I thought I'd best clarify this detail... I'm pulling at threads because my (recent) V0.2 build is not healthy (Windows says it fails a Device Descriptor Test on attach...)

References

Links to a video, or more info

[technobly]

Thanks for the report, this is a bug in the silkscreen. If you swap the parts, it will probably still work since they are in series, but you'll have to get the polarity of the LED correct. If you build it like my image, that's the intended way.

This has been fixed in v1.0