FYI and PSA on Oled Chip on Lite - not an issue

[Leerz]

again, this is not an issue,
if you guys ever install an oled chip on a lite,
don't bother using the original lite 3v and gnd locations (the one cap beside the SDCARD slot)
use the one provided on the diagram(under the GCslot, https://github.com/sthetix/DIAGRAM/blob/main/OLED%20on%20LITE.png

it seems using the OLD 3v line makes weird reset situations, (random reboots)
won't boot cfwemummc, ofwsysnand, cfwsysnand
my guess is that the new OLED chips PULL more power vs than the Lite chip, i could only guess but it's probable. i did a test wherein i was using the OLD 3v line from the SD and instantly pulledout the SDCARD, it would start up just fine instead of triggering a reset.

[sthetix]

hello, yes that is correct. We need to use the 3.3v from under the GC slot to make it work perfectly.

…

On Mon, 21 Nov 2022 at 22:45, lrz ***@***.***> wrote: again, this is not an issue, if you guys ever install an oled chip on a lite, don't bother using the original lite 3v and gnd locations (the one cap beside the SDCARD slot) use the one provided on the diagram(under the GCslot, https://github.com/sthetix/DIAGRAM/blob/main/OLED%20on%20LITE.png it seems using the OLD 3v line makes weird reset situations, (random reboots) won't boot cfwemummc, ofwsysnand, cfwsysnand my guess is that the new OLED chips PULL more power vs than the Lite chip, i could only guess but it's probable. i did a test wherein i was using the OLD 3v line from the SD and instantly pulledout the SDCARD, it would start up just fine instead of triggering a reset. — Reply to this email directly, view it on GitHub <#9>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AFJ23DZCZ6GGE4C2XMHQXX3WJOKKPANCNFSM6AAAAAASGZDEK4> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>